TItle : Annihilation SC2 inspired (Scratch Build)- Finished

[ayokis 0]

and now....the Terran Marine Resin molding.......

[ayokis 0]

Using the same procedure as the zerg. Heres the rubber molding of the Terran Marine

Manny Pacquiao watching every details in pure amazement

terran marine upper part rubber molding

back part

preparing the moldings as well as the volcanic ash/sand

already mixed all the materials include the volcanic ash / sand

adding an extra pint of resin and volcanic ash /sand

putting resin inside the rubber mold

Joining together the front and back side of the Terran marine mold

Sealing it up

PUtting additional Volcanic ash / sand

fill er up!

after a few hours......

getting ready to see the final Terran Marine resin output

hmmmm....as good so far....feet first

nice crotch details...

hmmm.. im satisfied with the details.....

im also satisfied with the looks at the back

Terran Resin meets the terran clay .

looking at the back portion.

removing excess resin and some flaws.

Getting Ready to paint it .......

[ayokis 0]

after a thorough check, the arms are a little bit short for it to fit the 244 x 244 ECS mobo. so,

adjustments will be made quick.

heres the exact size of the ECS H57H-mus mobo.

preparing some clay

heating it up for easy carving and molding

applying the heated clay

removing excess clay

shaping it up to show more details

More pics to come.......

[ayokis 0]

this is the result and some details of the revised extended Terran marine arm

front view

after applying the first primer, this is how it looks like:

front view

cleaning it up again and inspecting some flaws

well done, for now.....

the whole terran marine with 2nd primer

applying the real color of terran marine. Blue.

and now the lower part

and now the FACE.....

[ayokis 0]

Rebuilding and Reconstructing again the space crate to accommodate a 244 x 244mm and 170 x 170mm motherboard.

The space crate will also be made out of Resin / Fiberglass and Volcanic Debris.

[ayokis 0]

working on the attachment to secure the arms to the body

painting the arms and attaching it to the terran marine body

Starting to paint the Zerg

so far so good.....

Giving more details on the Gun shot wound

and now the stepped on zerg (back)

and now the stepped on zerg (front)

putting primer on Terran Marine gun and getting ready for the actual paint

[ayokis 0]

casting the Space crate. This is where well put all the Computer parts including the PSU. Most of the weight of the crate will be absorb by the terran marine head. Two arms will be just for support.

There will also be a light post at the back of the crate for support. it will be seen soon.....

[ayokis 0]

While waiting for the Resin / Volcanic Material Case. I would like to present

the Products I will be using for this Project. Thank you to all who supported

CM GX 550Watts

CM Vortex plus

ECS H57H-MUS

Low Profile Radeon 5750

Hitachi 2TB HDD

Intel I5 -750 lynfield procie

GSkill RipJaw DDR3-1333 8gb

Inside the ECS mobo box

The ECS Black series

all solid caps

Hitachi 2tb HDD

Gskill Ripjaw ddr3-1333

I need to make the load lighter, so i decided to remove the casing of the psu. warranty void.

replacing it with an acrylic psu as replacement cover

this is how it looks like, without the paper ofcourse

placing the procie

preparing the materials for CM HSF

adjusting the hsf brackets

applying the CM thermal paste

installing the CM vortex HSF

getting ready for the Gskill memory

CPU, HSF and Memory now in place

making sure that the mobo is properly working

CM heat sink fan now working

CM HSF properly installed

opening screen

The Low profile Powercolor Radeon 5750

Running it in full speed

This is where il place the PSU

and this is where il place the HDD

I might change this fan to a fast and thinner 80x80x15mm fan

More pics to come.....

[ayokis 0]

Since, I have finished installing all pc components. Lets get back again to the the terran marine

painting some of the details on the Terran Marine

hoping the get the right colors......

[ayokis 0]

The Final Version of SC2: Annihilation

putting more details and painting the first made SC2 terran marine annihilation

putting more details on the zerg

putting more details at the back

more details again at the back

and the middle part of terran

and this hand will serve as the support for the space crate

planning to put the board

emulating the zerg scratches by using a real chicken feet

applying it on the front cover of the space crate

this is how it looks like

putting inside the motherboard

laying everything inside

resting the mobo inside the space cm set

making an acrylic bracket for the psu

something like this:

need to check if the pc system really works

yup its all working....

putting all the parts inside

making sure that its properly connected

securing the hard disk

securing the bracket for the psu

putting the nzxt led lights

finishing the led lights

and testing it with CM psu

working space age cooler master sc2 inspired pc

putting up the top cover of the space crate

Uploading more.......

the front space crate with cooler master logo and led temperature monitor

another view of the front crate cm space crate with zerg scratches

right side of the crate

looking inside the crate with ecs logo

power color logo on the side

roccat logo and roccat headset

and roccat keyboard and mouse to complement the whole gaming experience

back portion

terran marine holding the finished space crate pc

lower part of terran marine with roccat gaming peripherals

Presenting the CM stacraft 2: Annihilation space age crate

Final Picture ( 1 hr remaining, beating the Deadline )