Sign in to follow this  
ASPHIAX

USS EURISKO - Intrepid Mark II Class

Recommended Posts

ASPHIAX    0

Thanks bro! Gonna get the epoxy clay tomorrow so i can start on the detail work of the outside :D

REALLY looking forward to that!

Share this post


Link to post
Share on other sites
ASPHIAX    0

Here is some graphical work that will be the base for the duo fangrill.

2edr4uq.jpg

svjw2o.jpg

Final version

2mhj7gk.png

Laters

ASPHIAX

Share this post


Link to post
Share on other sites
ASPHIAX    0

Ok here is a short update !

Fan Layout (92 mm scythe fans) integrated into the lower saucer section

wt9ert.jpg

started work on the DCIM's and armour plating

6ofx4y.jpg

Tricky Business, The deflector tunnel was not properly formed. So I had to cut it up knowing I did not have enough foam left to replace it.

23s82t1.jpg

After a extremely helpfull visit to a guy who has been building his model airplanes for 30 years i have descided to take the negative/positive mold approach. So removed the tape and started filling the sides.

Big advantage is that i can rebuild the canope within hours if i screw up!

11ipvv6.jpg

Total view , in the background the bottom saucer section drying.

wivc6e.jpg

So now a week of sanding, filling, sanding, filling, sanding, fill ....

Grt

ASPHIAX

Share this post


Link to post
Share on other sites
ASPHIAX    0

I will not bother you guys with pictures of the sanding and filling process but I have taking a old piece of mesh and cut it up to make more clear the "Dilithium Cooling Intake Manifold" idea.

I will place some fat CCFL's or LEDS behind the mesh.

Was a real task to get all the lining straight. Used a dremel to "sculpt" the filling and every night put on a layer of filling and sanding ...

1e5t1u.jpg

fm89vq.jpg

But i am not quite there yet. The symmetrie is a little off, so out comes the trusted dremel !

vhb95z.jpg

Share this post


Link to post
Share on other sites
ASPHIAX    0

As Usual the first weekend update !

Hmm, what are these ?

8vt769.jpg

Ahh, pylons!

e5jsas.jpg

And a Fitting session

mkhchf.jpg

Starting to look like something!

vg2y6v.jpg

5ck8e9.jpg

dffvx2.jpg

Tomorrow continue the sanding and filling of the pylons and brainstorm on how to fit the reservoirs and the 19mm tubing for the watercooling.

Before and After a round of sanding

2zollkm.jpg

Missed the correct symmetrie a lot of times, used up a lot of foam making mistakes. I really had to sit down to think why I got it wrong all the time and how to get the impuls drives correctly out of the foam.

mw8nzb.jpg

Finally the right symmetrie !!!!!

2h353qu.jpg

Whats wrong with this picture... Can you see it ?

vrg8bq.jpg

Nicely symmetrical but it had to be mirrored !!!!

:argue: , :violent1: , :angryfire: , :banghead: , :crybaby: , :bigsmurf:

6tl8bq.jpg

ebeow2.jpg

nn8fv8.jpg

And after that everything covered in filling and glued together!

Laterz

ASPHIAX

Share this post


Link to post
Share on other sites
ASPHIAX    0

Here is part 1 of the overview of this weekend.

ev9mqq.jpg

ASPHIAX

1621wzp.jpg

V.S

EPOXY

jttr90.jpg

I was not looking forward to this job. I knew that if i was to mess up, a couple of weeks of work would go down the drain. Full enthousiasme started this job then...

I dont have to much pictures of the actual Epoxy work as the plastic gloves covered in Epoxy prevented me from using my camera.

So I first used several layers of loosening wax on the model. Let these layers dry and covered the model with a thick layer of epoxy. The placing of the glasfiber cloth on the straight and flat surfaces is not a problem, but then there were the corners.

What a DRAMA !!!

I knew of the difficulties with straight corners with glassfiber but I did not expect it to be that bad. A to straight of a corner (close to 90 degrees) will mean that a bubbel of air gets trapped on top of the corner and a corner with a radius will form in the lower part. The radius is not that bad, you can use a filler to resolve it. The bubbel on top on the other hand is not ok at all.

You cant push it down by hand (tried it, keeps popping up) and when not treated it can cause the paint to pop off when even moderate force is used on the model let alone fly at warp 9 :eyebrow: So I had to cut the bubbels out and fill them with epoxy.

2el402e.jpg

For a layman simple forms and shapes are fairly easy. A complex shape like the EURISKO with several adjacent inner and outer corners is tough. Especially when there is a timelimit on the time epoxy can be used before it solidifies. For my next build I will think twice before using the material in this fashion again.

Here is the result!

2dran36.jpg

33z49bc.jpg

Seperate the canope from the deflector tunnel

119pefs.jpg

And back to the baseplate

33y1ic4.jpg

Started to empty the canope. In the end I did not choose to do the positive/nagative mould. The primairy reason is that I do not trust myself enough with the epoxy.

(I can hear you thinking .... Yes changed direction again!!!)

rtdxqo.jpg

The DCIM's can finally be opened

fxtk4w.jpg

Layer on layer deeper. Looks kinda like an old roman theater!

1igxop.jpg

Completely hollowed out the canope. Left some foam at strategic area's as the whole became encreasingly flexible and vulnarable. Due to the left foam the model will keep the intented form. I will put another layer of epoxy/glass on the inside making the canope around 2 cm's thick and much stronger.

1zeavf6.jpg

Canope is completely finished. At least on the inside there is now enough room for the hardware. the outer layer will be covered with filling and I will recreate the straight corners.

1zvydu9.jpg

So eventually it all came together. Had to do a lot of "On the Fly" adjustments but that is part of the fun for me. Thinking on my feet and adjusting where necessary.

As usual my wife was not so happy with me working on the model.

15pg09d.jpg

Laterz

ASPHIAX

Share this post


Link to post
Share on other sites
ASPHIAX    0

Here's another short update

Took apart my old hobby pc for a test fitting in the Eurisko.

This is what it looked like as a V1

2j63042.jpg

The V2 with a lot of plexiglass work, custom window and refitted case to house the internal 280 (roof) and 240 )(floor) radiators

20rvhiq.jpg

Eurisko Test fitting

9a4emx.jpg

264jg94.jpg

Can order the goodies now the internal dimensions have been confirmed. Looks like maybe I can even fit a pair of 6870's in crossfire :-)

Going to do the internal canope work tonight and start on the epoxy for the deflector tunnel.

Later

ASPHIAX

Share this post


Link to post
Share on other sites
ArgOs    0
:shock: is fantastic, I'm a fan of the old series of Star Trek, I will follow this work very carefully. :cheers:

Share this post


Link to post
Share on other sites
ASPHIAX    0

fegjrb.jpg

Here's a pic that will give you a better idea of the dimensions.

She is 154 cm long, 61 cm wide and 34 cm high !

Before you ask, I have a big office in my house she is going to live in , LOL !

Share this post


Link to post
Share on other sites
ASPHIAX    0
:shock: is fantastic, I'm a fan of the old series of Star Trek, I will follow this work very carefully. :cheers:

Thansk Arg0s! You say old series, do you know more than I do as there will be a new series? :bounce:

It is about time a new Star Trek series would pull the whole scifi genre outy of the hole its been dragged into!

With Firefly, Batllestar Galatica, Atlantis, Caprica and now also Stargate Universe cancelled, there's almost nothing left !!!!!

If this gets read by anyone there : COME ON SyFy CHANNEL !!!! Stop bugging us with 3 types of gosthunters and get some real scifi on air !!!!

Sorry, had to get that off my chest !

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this