Sign in to follow this  
ArgOs

�O�HotRod��o

Recommended Posts

ArgOs    0

I pop rivets to attach the fender, then I sand it.

HR068.jpg

HR069.jpg

my new acquisition, a fan CooleMaster Megaflow.

HR076.jpg

cut for the wheel.

HR70.jpg

HR071.jpg

I prepare the sheet, sanding it.

HR072.jpg

I put the putty.

HR073.jpg

paint the front.

HR074.jpg

HR075.jpg

Share this post


Link to post
Share on other sites
ArgOs    0

Continuing with my solitary work, Inside the fender, I placed a plate for better viewing and will pass putty for details..

HR077.jpg

HR078.jpg

HR079.jpg

Then I paint with primer.

HR080.jpg

I pass sandpaper the to the other parts to pass after priming.

HR081.jpg

The front and the air intake.

HR082.jpg

I reinforced the top, I will pass the sandpaper and putty, then put the air intake and putty.

HR083.jpg

HR084.jpg

I cut to the air intake.

HR085.jpg

HR086.jpg

HR087.jpg

Then I reinforced the bottom and I made ​​some cuts.

HR088.jpg

HR089.jpg

And finally I started to paint some parts.

HR090.jpg

Thanks for your feedback.

Share this post


Link to post
Share on other sites
ArgOs    0

Tortured_soul thank you master.

After the primer was sanded the surface to match it.

HR091.jpg

Place a plate on her side, and you will see in the future.

HR098.jpg

Then everything was painted shiny black.

HR092.jpg

HR093.jpg

HR094.jpg

HR095.jpg

the hinge and silver color foot.

HR096.jpg

HR097.jpg

Pictures of the progress of the painting.

HR099.jpg

HR101.jpg

HR105.jpg

HR100.jpg

I cut the side to match the inclination of the case.

HR102.jpg

HR103.jpg

HR104.jpg

Thanks to all for the comments.

Share this post


Link to post
Share on other sites
ArgOs    0

Thank you master.

The side ready.

HR114.jpg

HR113.jpg

I use a part that I cut the case, to create the side support.

HR109.jpg

I will attach the hinge to the Side. As you will see there is much dust in my garage.

HR108.jpg

HR110.jpg

HR111.jpg

HR112.jpg

I put a rubber at the foot, between the steel sheet and foot, other rubber will go under.

HR116.jpg

I created the mesh brackets

HR106.jpg

HR107.jpg

I painted pop rivets.

HR115.jpg

Share this post


Link to post
Share on other sites
ArgOs    0

I hope to finish it takes very little time and I still have not finished the work. :(

Computer hardware.

HR128.jpg

HR127.jpg

The Support for HD

HR119.jpg

HR120.jpg

I begin to put the hardware in their place.

HR117.jpg

HR118.jpg

HR122.jpg

HR121.jpg

HR123.jpg

HR124.jpg

Other changes in progress. The filter of the air intake.

HR125.jpg

HR126.jpg:D

Share this post


Link to post
Share on other sites
PaPang    0

OMG Argos, just like I said, it is soooo hard to see detail on a black mod, specially with a black interior too.

I see the work on the slanted side cover, factory made look like you said. You do need a good wire management job to make us proud. The grill is +1A!

I don't like to rush you but there is just a couple of more days left, so no sleep for you, hehe.

Cheers and Saludos

Share this post


Link to post
Share on other sites
ArgOs    0

Thank you very much PaPang, I'm fighting against time and I will order the wiring.

I will finish it Sunday.

I show you a detail of HD support.

HR143.jpg

The wheel clock :P

HR129.jpg

I completely disarmed.

HR130.jpg

HR131.jpg

HR132.jpg

HR133.jpg

HR134.jpg

HR137.jpg

Electronic circuit.

HR135.jpg

I cut the tires well

HR136.jpg

and the fan

HR139.jpg

I cut inside the tire and the fan

HR138.jpg

HR139.jpg

HR140.jpg

Put in place.

HR141.jpg

HR142.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this