Sign in to follow this  
Rapt0r

New mid tower casing suggestion

Recommended Posts

Rapt0r    0

Hi guys,I would like to suggest a new mid tower casing that resembles the Cosmos casing style with CABLE MANAGEMENT HOLES as seen in the Cosmos,the rear of the casing and the top of the casing should have enough room to fit in 1x120mm radiator and 2x120mm radiator internally respectively[take in mind of the height of the radiator+fan as some cases only have room for the radiator but not with fan],an example of room for 1x120mm radiator+fan in the rear:

02_DetailedFeatures_6.gif

so far I haven't seen any casing that is able to do that internally as I myself is looking for a case that is able to do that,with that being said I hope Cooler Master can come up with new casings that are INTERNAL water cooling friendly,oh and not to forget a nice big windowed side panel to show all the innards!

By the way thanks Cooler Master for all the great products you have brought us :D

Share this post


Link to post
Share on other sites
EsaT    0
...mid tower... the rear of the casing and the top of the casing should have enough room to fit in 1x120mm radiator and 2x120mm radiator internally...

so far I haven't seen any casing that is able to do that internally!

Mid-tower size pretty much means that there's vertically enough space only for PSU and motherboard and not for anything else, except externally.

Share this post


Link to post
Share on other sites
Rapt0r    0
...mid tower... the rear of the casing and the top of the casing should have enough room to fit in 1x120mm radiator and 2x120mm radiator internally...

so far I haven't seen any casing that is able to do that internally!

Mid-tower size pretty much means that there's vertically enough space only for PSU and motherboard and not for anything else, except externally.

Its possible so long as the PSU is situated at the bottom

Share this post


Link to post
Share on other sites
Rapt0r    0
You sure the Cooler Mastr CM690 or Centurion 590 can't do this?

If the above 2 mentioned can do this why would I suggest this to CM?

Share this post


Link to post
Share on other sites
Zenphic    0

Well, Cooler Master makes the Aquagate S1 and it has a fairly large radiator with a 120 mm fan.

It fits the CM690 as well as the Centurion 534:

http://www.coolermaster.com/products/pr ... =1&id=2539

file1178692713186.jpg

What I think the reason why most mid-towers can't hold a radiator and 25mm height fans internally is because it would

make the case taller than needed. Most people don't have radiators. A good compromise is to allow the fans to

be installed outside the case, like the CM690.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this