Sign in to follow this  
Saki

Cosmos Suggestions

Recommended Posts

Saki    0

I have more suggestions for Cosmos case:

a) Has one bottom intake fan a filter? Because will be fine use it.

B) One intake fan and three exhausts – didn’t make this noise for intake fan?

c) Two fans on the top aren't close enough together to attach a 2x120mm radiator for water-cooling.

That way can be easy use radiator between top fan and PC case.

radiator.jpg

d) Holes on motherboard back panel for use a cable management

backpanel.jpg

1 – Two holes for motherboard and graphics card power (ok I see on the other image top hole already down) Middle hole maybe can be horizontal, because different size of motherboards).

2 – Need make some cable fixing holes on motherboard’s panel (like on 5.25 in drive bays).

3- Make some issue to cross vertical beam on bottom side.

e) No possibility to use additional fan for HDD (I think cooling isn't enough for 6 HDD now). My opinion is position 2, but for this need make removable bottom side of HDD rail.

hdd_fan.jpg

f) Plastic cable protection on holes.

cable_protect.jpg

Share this post


Link to post
Share on other sites
knud    124

Forwarded this to HQ. :)

Share this post


Link to post
Share on other sites
ID    0

Definitely some good suggestions here!

Share this post


Link to post
Share on other sites
Saki    0

Only small changes:

1) Screwless bolt using on HDD side

screwless_hdd.jpg

2) Not use too much logos please

much_logos.jpg

B) One intake fan and three exhausts – didn’t make this noise for intake fan?
- Maybe no, because enough holes on PC case for air
e) No possibility to use additional fan for HDD (I think cooling isn't enough for 6 HDD now). My opinion is position 2, but for this need make removable bottom side of HDD rail.

hdd_fan.jpg

- Maybe can make some door for FAN on bottom side of PC case. Position 1 is not enough good for cooling ( I think).

3) Plastic cable protection maybe can use for big holes on motherboard backpanel also

4) I writed earlier, but I make a link for it: Cosmos top panel cover. This cover can be "push open" or sliding.

Share this post


Link to post
Share on other sites
Saki    0

Will be fine air filter on all intake halls on PC case.

Can I ask a feedback from PM or HQ about decision? Or is it too early? :)

When coming the Cosmos case in Europe?

Share this post


Link to post
Share on other sites
knud    124

When I have an answer, I'll let you know.

I think the cosmos will be in europe, around end of august, but don't pin me on that. :P

Share this post


Link to post
Share on other sites
Saki    0

I’m afraid I have not enough images to view all part of cases, but I found a new (for me) image. Cooling of HDD looks better, but that way we can’t use last 5.25 in drive position. Maybe can be some possibility to use fan in this position (or under HDD-s like I told earlier).

hdd_top_cooling.jpg

On image we can see the air filter for intake fan (also) is missing on bottom side of PC case.

Plastic or rubber abrasion protection between the floor and the PC case’s aluminium leg. It help protect floor and PC case, and also reducing some noise. Make a hole on tube and put bung into maybe. Silver color bung is better.

cosmo_talp.jpg

pclabdugo.jpg

I think this abrasion protection for holes look’s good:

cable_protection2.jpg

Adhesive Lined Grommet Edging Polyethylene – Solid Wall

Share this post


Link to post
Share on other sites
hafiez    0

i totally agree with this rubber attach under cosmos. it will protect the downside of the case too. i mean, no scratch on its legs. 8)

Share this post


Link to post
Share on other sites
Saki    0

I copied my prior post to this topic, because it has to be here :)

Cosmos case look's like very nice, but for top panel missing a cover (I mean for connectors). It can be protect from dust.

Before:

IMG_7487.jpg

After:

cosmos_connector_shield.jpg

cosmos_connector_shield2.jpg

Maybe can be black or aluminium also. It can be "push-open" or „pull-backâ€

Share this post


Link to post
Share on other sites
knud    124

The top cover is going to be used in the next generation of the Cosmos.

(atleast, that's what the product manager says so far)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this