Sign in to follow this  
-_JonA_-

Aquagate Leakage ! :(

Recommended Posts

-_JonA_-    0
what size does the block say to use ? now if u r using the stock size hoses and it is leaking then the o rings or the compression ring could be damaged . is that a normal 1/4 inch pipe fitting that goes into the block ? see if ya can get 3/8 barb x 1/4 inch pipe thread . or remove the fitting go to ur local hardware store and find a Barb that has that same pipe thread normally they are 1/4 inch pipe threads ...

what's a barb? and I'm not good at inches, but the fitting is designed for 8mm id x 14 mm od (3/8 id x 1/2 od )

what if I screw off the hook and add http://www.perfect-systems.be/info.asp?info=57767 this object ... so I could add my 10mm hose... would this fit you think? .....

I think I need as special plugin that I need to plug on my waterblock, could it be?

Share this post


Link to post
Share on other sites
RaptorFury    0

this is a normal everyday barb http://www.frozencpu.com/images/products/detail_hires/ex-tub-32.jpg now they do mk reduser barbs as well i get 2 of the 1/4 or 3/8's inch barb i believe the auqagate uses 1/4 id inch tubing. ... ur local hardware store should have them barbs available . or you can check and see if a comp shop can order what u need , i would recomend u bring ur water block with you so they can get measure ments they need as well ...

Share this post


Link to post
Share on other sites
-_JonA_-    0
this is a normal everyday barb http://www.frozencpu.com/images/products/detail_hires/ex-tub-32.jpg now they do mk reduser barbs as well i get 2 of the 1/4 or 3/8's inch barb i believe the auqagate uses 1/4 id inch tubing. ... ur local hardware store should have them barbs available . or you can check and see if a comp shop can order what u need , i would recomend u bring ur water block with you so they can get measure ments they need as well ...

thx, I think I 've found my problem! I'll replace the 'Plug & Cool corner barbs' (http://www.perfect-systems.be/info.asp?info=57755) on my Aquagate with these: http://www.perfect-systems.be/info.asp?Info=57764 so I could fit my 10mm hose of Coolermaster!

what do you think?...

Only have one stupid problem: Ordered in the Netherlands, so I have to order it there again, but I don't care, if I can use my AG.

all my local hardware stores, deal not in Watercooling, or not in the Aqua watercooling, even not in Coolermaster! :'(...

RaptorFury I thank you a lot!

Share this post


Link to post
Share on other sites
RaptorFury    0

dont mention it thats what we are here for to help each other out .... keep us posted once u get all squared away ...just a bit of info barb from a hardware store ( ie. 3/8's x 1/4 inch pipe thread from a hardware store is the extact same thing as a barb from a comp shop that is 3/8 x 1/4 pipe thread . )

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this