eternity

Show Us Your Cases!

Recommended Posts

knud    129
":3an604qq]The 120mm fans run @ 5V and aren't noisy at all ... the Laing Pump and HDD are a bit louder ...

Those rads, are 360*360 (360*120 x 3)? Is the pump strong enough for that?

What are the temps you're gettin?

Share this post


Link to post
Share on other sites
":2ivbz4mn]The 120mm fans run @ 5V and aren't noisy at all ... the Laing Pump and HDD are a bit louder ...

Those rads, are 360*360 (360*120 x 3)? Is the pump strong enough for that?

What are the temps you're gettin?

That rad is designed to be equipped with 9 fans so the inner part is exactly 360mm in width, height is a bout 30mm more and it's a singe big rad not 3 smaller connected into one. The tubes are split so that the water runs through 3 simultanouesly - a Eheim 1048 is enough, a 1046 may be a bit undersized and the Laing DCC-1T+ (18W, normal has 12W) has no probs at all.

I'm currently testing my CPU overclock with prime - the water temp went from 21.9°C @ idle to 23.2° @ load after 1h.

Oh ... and i have some new additions to my colledtion :D

ATCS 201er, it's in pretty good shape :)

2011jx6.jpg

2012jp2.jpg

220-PX1 , the upper corner has seen better days :( It's been a tournament case so it has quite a few scratches.

2201zz8.jpg

2202oz8.jpg

2203fa8.jpg

2204ot8.jpg

both :

201220zu8.jpg

Share this post


Link to post
Share on other sites
knud    129

This case is pretty good with the white lights.

ps are you sure your memory is running dual channel?

Share this post


Link to post
Share on other sites
This case is pretty good with the white lights.

ps are you sure your memory is running dual channel?

Just wanted to start off and say thank you for your comments. They are greatly appreciated.

P.S. I'm sure my memory is running in Dual channel. Works in both slots 1 & 3 or 2 & 4. The reason I have them in slots 2 & 4 is because the heatsink fan extends over the 1st slot, making it difficult to remove/install.

DualChannel.jpg

Share this post


Link to post
Share on other sites

ATC-210-AX1

atcs2101oj4.jpg

Wavemaster Special Edition in blue, i haven't touched it yet ;)

wmblue1tb1.jpg

wmblue2bu0.jpg

And i got some more new hardware besides the cases :

bigbundleig3.jpg

ATC-101 and a new Special Edition Wavemaster

101wmgh3.jpg

1011mp5.jpg

1012vw6.jpg

wm1sj1.jpg

wm2of8.jpg

ATC-600-SX1

atc6001zb8.jpg

atc6002ct2.jpg

ATC-600 & ATC-410 :)

atcstvhl1.jpg

Last one is another ATC-500, that one should arrive tomorrow ...

Share this post


Link to post
Share on other sites

I've finished setting up the new Server this sunday 8)

New Server :

40GB Samsung for OS, 3*250GB in RAID5 for Data ... i'll replace the 40GB Disk with the Raptor fromthe old server when i take it apart.

hddslf2.jpg

asusserverxm3.jpg

On the left - old/current Server :

serverdh8.jpg

kabelyj4.jpg

inside1zl3.jpg

inside2hn2.jpg

Share this post


Link to post
Share on other sites
knud    129

Why is your cooler pointed that way?

Can't you flip it 180degrees?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.