Recommended Posts

Welcome,

 

I plan to improve the cooling abilities of my Cosmos 1000 while keeping unchanged its visual appearance.

For its 12th year, I want something big ! This will be a first, I have never changed anything inside, not even installed a custom WC loop, so this project is a real challenge for me.

 

boitier1.jpg

 

boitier2.jpg

 

boitier3.jpg

 

  • SETUP

 

MB : Asus Rampage V Edition 10

CPU : Intel Core i7-6850K

GPU : MSI GeForce GTX 1080 Ti Gaming X 11G

RAM : Corsair Dominator 128 GB DDR4 3200 MHz CL16

Storage : HDD Seagate Barracuda 2 TB (x2)

SSD Samsung 850 Pro 512 MB (Sata)

SSD Samsung 960 Pro 2TB (Nvme)

PSU : Enermax MaxTytan 1250W 80Plus Titanium

Case : Cooler Master Cosmos 1000

 

composants1.jpg

 

  • COOLING

 

Current cooling


Noctua NH-D15s

2 x Noctua NF-A14

2 x Noctua NF-S12A

 

Future cooling


EWKB custom loop :

 

EK-FB ASUS R5-E10 Monoblock RGB

EK-FC1080 GTX Ti TF6

EK-CoolStream CE 420

EK-XRES 140 Revo D5 PWM

EK-CryoFuel Clear

EK-M.2 NVMe Heatsink

 

Noctua NF-A14, NF-S12A and NF-A14 Chromax Black

 

Alphacool Eisschicht thermal pad 14W / mK

Thermal Grizzly Kryonaut thermal paste 12,5W / mK

Thermaltake Pacific TF1 Temperature and Flow Indicator

 

composants2.jpg

 

  • LIGHTING


Alphacool Aurora RGBW Controller

2 x Alphacool Aurora Flexlumière 60 cm RGBW

2 x Alphacool Aurora Flexlumière 30 cm RGBW

4-Way Splitter Cable for RGBW led strip

 

composants3.jpg

 

  • MATERIAL


3 Side panels Cosmos Pure (black) in aluminum

2 Full front panels mesh for MasterBox 5

2 Cooling brackets 420 mm for Cosmos C700P

1 Cooling brackets 280 mm for Mastercase Series

 

achat.jpg

 

  • TOOLS

 

Dremel

Thermaltake bending kit

Heat gun

Drill

Metal saw

Glove, mask and protective glasses

Motip paint spray

Spray gun for painting with 4 flat jet nozzles

 

outillage.jpg

 

kit-peinture.jpg

 

  • AIRFLOW ANALYSIS

 

By default, the Cosmos 1000 is equipped with four fans, a single one bringing fresh air (bottom) and three extracting hot air (two on the top and one on back).

 

The idea is to mount a custom WC loop as well as keeping an afficient airflow in the case.

 

To this goal, we will install on front 3 fans (140 mm) to extract the fresh air and on top a radiator equipped with 3 fans (140 mm) to evacuate hot air.

On rear, we will keep the existing fan (120 mm). These fans will be filtered by a mesh panel.

 

airflow-analysis.jpg

A power supply cover will be built with a side panel.
It will isolate the power supply from the rest and will receive the storage units (SSD / HDD) on top.
The fresh air coming from the front will flow towards the back of the case like a tunnel.

The pump will be mounted either on the back panel.

Two storage units will be positioned vertically on the back and on the front.

airflow-analysis2.jpg

 

  • MANAGEMENT CABLE

 

The openings 1 and 2 are separed by side panel mechanism (draw in black) which prevents the passage of cable.
This problem will be solved by additional openings (draw in yellow)

Part 3 will be removed and replaced by a new panel supporting storage units.

 

cable-management.jpg

 

  • PANEL CLEANING

 

We start by cleaning the side panels.

We remove the frame maintained by 18 screws and the sound-absorbing foam.

The double-sided adhesive sticks so well that I took 2 days to make 3 panels. Acetone is a fantastic product for cleaning !

Now the 3 panels are ready for cutting.

 

panneau1.jpg

 

panneau2.jpg

 

  • DISASSEMBLY

 

After some measure, I disassembled the case.

 

  • Front door
  • Top and front panel
  • Control panel
  • Wrists and Feet
  • Bottom filter
  • Side frames
  • Drawers hard drives

 

demontage1.jpg

 

demontage2.jpg

 

demontage4.jpg

 

  • CUTTING THE CASE

 

The hard drive cage and the 5.25-inch bay are removed without weakening the structure.

 

demontage4.jpg

 

demontage5.jpg

 

The back, the top and the front panel was cut out, as well as the openings for the passage of the power cables too. Some drilling was done.

 

demontage6.jpg

 

There is a lot of space now, nice !

 

  • RADIATOR INSTALLATION


I installed at the top a 420 mm radiator.

I lowered the radiator by 25 mm in order not to exceed the available area of the original plastic top panel.

As the radiator is a 420 mm one, I had to completely rethink the layout of the front buttons (e.g. power, reset and USB ports).

 

radiateur1.jpg

 

radiateur2.jpg

 

  • CUTTING PLASTIC FRAME

 

Cutting of the plastic frame is mandatory to fix the new top cover.

 

cadre3.jpg

 

The side frame is painted with a matte white color.

Before painting the frames, I removed the seal around the frame.

 

cadre4.jpg

 

  • CUTTING MESH FILTER

 

I removed the perforated metal grid that was fixed to the plastic frame and cut out the frame to put the mesh filter and bracket.

 

demontage3.jpg

 

filtre1.jpg


filtre2.jpg

 

  • CUTTING THE PANEL CONTROL

 

Originally, there were 4 USB 2.0 ports and other outputs that I did not use.
I modified the control panel to integrate 2 USB 3.0 ports.
The Power and Reset button will be moved forward or replaced by an Alphacool Powerbutton.

 

commande1.jpg


commande2.jpg


commande3.jpg

 

power-reset-usb.jpg

 

  • BUILDING TOP COVER

 

To make the top cover, I used my first previously cleaned panel.

 

capot1.jpg

 

capot2.jpg
 

Comparison with the old top cover.


capot7.jpg


capot8.jpg

 

The top cover once installed with control panel modified.

 

capot9.jpg


capot10.jpg

 

The top cover is painted with a black matt color.

 

capot3.jpg

 

capot4.jpg


capot5.jpg


capot6.jpg

 

  • BUILDING THE PSU COVER

 

To make the top cover, I used my second previously cleaned panel.


cache-alim1.jpg

 

Small adjustment.


cache-alim2.jpg


cache-alim3.jpg

 

The psu cover is painted in white matt color.


cache-alim4.jpg

 

cache-alim5.jpg

 

  • BUILDING THE PUMP & STORAGE BRACKET

 

To make the pump / reservoir bracket and storage one, I used my third previously cleaned panel.
Depending on the capacity of the hard drives, the mounting holes have not the same layout, hence the 6 holes per disc.
The pump / reservoir and storage bracket will be attached to the case.


pompe-disque0.jpg

 

Wrong calculation for storage bracket, start again !

 

inutile5.jpg

 

The bracket is painted in matt white color.


pompe-disque1.jpg


pompe-disque2.jpg

 

I bought an anti-vibration HDD mounting kit and a rubber pad for pump bracket to reduce vibration.

The rubber pad is installed at the bottom of the pump / reservoir bracket.


accessoire3.jpg


rubber-pad1.jpg

 

  • MANUFACTURING OF NEW ELEMENTS

 

PSU cover

Top cover

Pump / reservoir bracket

Storage bracket

Small brackets to install the radiator and the front fans.

 

nouvelles-pieces.jpg

 

 

  • TEST ASSEMBLY

 

Without painting and definitive fixations, I tested just the assembly to verify that everything was fitting perfectly.

 

test-assemblage.jpg

 

  • UNNECESSARY ELEMENTS


inutile1.jpg

 

inutile2.jpg

 

Beautiful sound-absorbing foam - sadly not used.

 

inutile3.jpg

 

Obsolete USB 2.0 port and other inputs / outputs from another era - as well as the associated cables.
 

inutile4.jpg

 

  • PAINTING WORKSHOP

 

peinture1.jpg


peinture2.jpg


peinture3.jpg

 

The front fan mount (top) has been painted in 2 colors.
The front in matt black and the inside in matt white to built an harmony of colors.
All the holes and sharp edges were sanded with sandpaper for an flawless result.

I have put neodymium magnets on the front fan mount to be able to remove it when cleaning

 

support-radiateur.jpg

 

The other bracket was fixed at the bottom.

 

facade2.jpg

 

Another bracket for the radiator was fixed to the back.

 

suport1.jpg

 

Finally, I used 7 spay bombs 2 Primers, 3 Matt White, and 2 Matt black.
I still have 2 spray bombs glossy black. It is emptying at a speed these little bombs !

 

peinture4.jpg

 

  • PAINTING WRISTS & FEET

 

The wrists and feet are painted in matt white color.

 

pieds-poignets1.jpg


pieds-poignets2.jpg

 

  • PAINTING THE DOOR

 

The door is painted in matt white color.


porte1.jpg


porte2.jpg


porte3.jpg

 

  • PAINTING SIDE PANELS

 

The side panels are painted in matt black color.

 

panneau3.jpg

 

  • ASSEMBLY MONOBLOCK CPU & FULL COVER GPU

 

1080824574_001blocekwb1.thumb.jpg.407b6eb609713f3f9c1a02a65448e884.jpg

 

912387417_002blocekwb2.thumb.jpg.0451573acf471fc611d4ec11f256ff38.jpg

 

Motherboard without heat sink

 

1299300567_003cartemrenue.thumb.jpg.020465e5052d26219e4653705332c7bf.jpg

 

Heat sink and rgb part

 

861906409_005dissipateurs.thumb.jpg.4e806809691d87332417fa593ba01782.jpg

 

Motherboard with monoblock CPU

 

1568214885_004cartemreekwb.thumb.jpg.91601356196cb44c207bbb530154b309.jpg

 

Graphic card

 

998482218_20191003_12142701.thumb.jpg.56744d3d0a180c188fa4c28927becf79.jpg

 

Without heat sink

 

1155551650_006msi.thumb.jpg.958e61bd5b31415557443269685a4a43.jpg

 

Thermal grease

 

954495911_006pate_thermique.thumb.jpg.a03febcdd968228bb907cdf528c7781e.jpg

 

Thermal pad

 

245479618_006pad_thermique.thumb.jpg.713592a499afe301c579269b97d4a5b5.jpg

 

Fittings

 

45588721_007embouts.thumb.jpg.992444dc5f943db16d32fff44ec0ee6c.jpg

 

Alphacool Eiszapfen Pressure Valve.

 

43485617_008soupape.thumb.jpg.19f64e0a4cb1b7d065cdd92f9c3123a9.jpg

 

I bought a power adapter for Temperature and Flow Indicator to facilitate cable management.

 

accessoire2.jpg

 

accessoire1.jpg

 

I will use a 3M Velcro to fix the SSD.

 

scratch.jpg

 

  • CUSTOM LOOP SCHEMA

 

08.jpg

 

  • PHOTO FINISH

 

A001.thumb.jpg.fae5d7267a3db5e22ccabdd16f22dfb6.jpg

 

A002.thumb.jpg.bfd096cfbb1b8a0d6c65a184001eb7fe.jpg

 

A003.thumb.jpg.bff86a0d34549a575769a36f16d39b14.jpg

 

A004.thumb.jpg.949902c8fb3c4720d18443c862d34347.jpg

 

A005.thumb.jpg.b05ed883d1945954d2284a597b85e22f.jpg

 

A006.thumb.jpg.ea262f983e7ed645428c56175883891e.jpg

 

A007.thumb.jpg.e1bf25da4bed44e7cf9420c0196e0afc.jpg

 

A008.thumb.jpg.6a63569185d4d453ea0ffbf5eb09839e.jpg

 

A009.thumb.jpg.5a90421ea927c4e62ef9b78785791fcb.jpg

 

boitier04.thumb.jpg.9c35aa98017302b12ac873812564470a.jpg

 

A010.thumb.jpg.563d82d47fc79b8af195b4f853361230.jpg

 

A011.thumb.jpg.429ea0fb3a299e1a814b1b48e1248f71.jpg

 

Edited by Pascal HERMAN
  • Upvote 1

Share this post


Link to post
Share on other sites

cosmos1000-cmws2019-3.jpg

 

cosmos1000-cmws2019-2.jpg

 

cosmos1000-cmws2019-1.jpg

 

With lighting, the rendering is more fun .:thumbup:

I thank you for your support.

I spent a lot of time on this project, I do not regret my investment in tools, materials, components and various accessories for a result that satisfies me fully.

I wanted to do something clean, rather sober but classy and efficient in cooling, with a custom cable management.

I hope you enjoyed my work, that you liked the project and that it gives you ideas for your own realization.

 

Now it's up to you to play, vote!

 

French traduction :

 

Avec de l'éclairage, le rendu est plus sympa :thumbup:

Je vous remercie  pour votre soutien.

J'ai passé beaucoup de temps sur ce projet, je ne regrette pas mon investissement en outillage, matériaux, composants et divers accessoires pour un résultat qui me satisfait pleinement.

J'ai voulu faire quelque chose de propre, plutôt sobre mais classe et efficace en refroidissement, avec un câble management sur mesure.

J'espère que vous avez apprécié mon travail, que le projet vous a plu et que cela vous donne des idées pour votre propre réalisation.

 

Maintenant, c'est à vous de jouer, voter !

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.