Recommended Posts

IrenModz    6

Finally managed to open my worklog for CMWS 2019.
Will be using SL600M this round.
Hoping to finish it on time.
Wish me luck guys!!

IDoYfiV.jpg

  • Like 1

Share this post


Link to post
Share on other sites
IrenModz    6

Having time to upload the worklog.
Lets start with the water pump.
Thanks to Bitspower for providing with 2 x D5 and the top mod for dual D5.

Pump - Bitspower D5 Vario Pump | BP-D5VP
Top  Mod - Bitspower 
Dual D5 MOD TOP Extreme -  D5TOPX2

Made a simple custom floor stand so that the pump and mod top can stand on the floor without having to "sacrifice" the cables.
 

7.jpg

 

8.jpg

 

9.jpg

 

10.jpg

 

12.jpg

 

Share this post


Link to post
Share on other sites
IrenModz    6

Done with the pumps and mod top lets go to the reservoir.

Bistspower sent me the Bitspower Water Tank Z-Multi 200.
Decided to change the black pom caps to white version.

Making the custom holder for the reservoir so that i can mount it on the front of the case.

 


 

13.jpg

 

14.jpg

 

15.jpg

Share this post


Link to post
Share on other sites
IrenModz    6

Really behind the schedule now with few days left for due date....
Updates on the Bitspower reservoir.
Making internal logo plate for it.
 

Laser cut is really helpful in speeding up things.

16.jpg

 

Engraved the Cooler Master logo and the project codename

17.jpg

 

Peel of the protective paper film and really satisfied with the finishing.

18.jpg

 

Assembling the holder with the plate inside the reservoir.

19.jpg

 

Looking GOOD!!

20.jpg

 

Finished!!!

21.jpg

 

22.jpg

 

23.jpg

 

 

Share this post


Link to post
Share on other sites
IrenModz    6

Move top next job.
Front panel mount (plate) for the reservoir holder.
Making the inside case more clean and easy to attach the reservoir.

 

Using black gloss 3mm acrylic with few screw holes (140mm x 2 mount) to make it more secure.
On top and bottom there are cut outs for the tubing pass thru.

24.jpg

 

Behind the reservoir holder i've drilled 6 x M3 size screw hole (8mm acrylic).
Forgot to snap picture of it.

25.jpg

 

Mounted it on the case.
Main problem is if there is enough clearance to put back the  SL600M original front panel

26.jpg

 

Front panel without the aluminum plate attached.
I ve no idea if it s possible to attache the aluminum plate on it.

27.jpg

Share this post


Link to post
Share on other sites
IrenModz    6

Okay this is the biggest thing about this mod.
Custom made hardware!!!!
Motherboard, cpu, gpu and memories!!!

 

The idea behind this mod is cost effective and to show to other that you can still "MOD ON' even without sponsorship or hardware.
Of course it all are dummies.

 

We start with the motherboard.
First we do the mock up first.
With thinner acrylic so that i dont waste if it s fail.

Plan is to use 5mm for the final one
For mock up i ll be using 2.5mm waste (scratches) acrylic.

 

I ve been working for the design for sometime.

28.thumb.jpg.658a98745e8e7f0f2f2759539d2cc26a.jpg

 

Laser cut the mock piece.

1.thumb.jpg.606e4be8999ed666049a6662a565cad7.jpg

 

2.thumb.jpg.d4f25608bcb3a849ef210bdb32faae4d.jpg

 

This is the 3rd piece after some try and error with the motherboard waterblock screw holes cut out.

I am using a leftover waterblock from my last project.
The waterblock is for ASUS Rampage 3 Extreme. LGA 1366 socket board.
Will seat perfect for this project.

3.thumb.jpg.134988d7d245d44bdf9b3d20886ab72b.jpg

 

 

Finally everything is nearly align. 

4.thumb.jpg.bcb2a6998d79b2802c399a166069b8ac.jpg

 

Test the CPU waterblock with LGA115x socket mount.
Realized that i need to re position the mount to the bottom a bit.

5.thumb.jpg.b4150b362baa4012b0734237f73f0f2d.jpg

Share this post


Link to post
Share on other sites
IrenModz    6

I am supposed to used 12mm clear acrylic tubing on this project.
However i can't find it. I have no idea where it went missing....
Luckily i still have the Bitpsower brass copper 12m tubing.
Thing about this tube it wasn't design for bending. However i ll try and see how.

 

 

29.jpg

Share this post


Link to post
Share on other sites
IrenModz    6

All the required pieces attach to the base plate.

IO Cover, and the rest of the mobo armor plates

 

.30.thumb.jpg.419302020fd5ac495fdca3f5d8df8afe.jpg

 

31.thumb.jpg.0d0f8dba35b60a6d7d512db8e3d440d8.jpg

 

And here comes the problem.

only the top and middle screw holes are aligned.
The other 3 on the bottom are off.
Around 2-3 mm.
The measurement supposedly correct and precise.

33.thumb.jpg.40f199c2a09d920d42450c7316e14984.jpg

Share this post


Link to post
Share on other sites
IrenModz    6

So the machine have some axis issues.
It doesn't follow the right size of the drawing from the computer.
Just on one axis. the offset is too much. 
Minus 2 mm.

 

Picture is not related to the issue.

34.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.