Recommended Posts

asmodz    2

as_modding_background_small.jpg.e7131dcc6badaf85ff5cf8575e53cd2e.jpg

This is my worklog for this years Coolermaster World Series - Master League - Scratch Build

 

the idea was to mostly print parts to merge them together to a case.

i had various ideas, but my wife chose this one as it fits the contest for sure.

 

the actual speccs:

  • AsRock Fatal1ty B450 Gaming-ITX/ac
  • AMD Ryzen 5 2600
  • 4x be quiet! Pure Wings 2 80mm
  • be quiet! SFX-L Power 600W
  • 2x Coolermaster ATX 24 Pin 90° Adapter
  • Coolermaster MASTERAIR MA610P
  • SSD / RAM / GPU not decided/sponsored yet

 

I want to thank AsRock, be quiet! and of course Coolermaster for helping me bringing this project to life.

 

the concept i made in SketchUp:

project_cmegg_2.jpg.23111f30b91a01281815e8412f43a1be.jpg

 

Share this post


Link to post
Share on other sites
asmodz    2

so the first steps in building this case were making a rough model to get a better look at the actual size.

 

0.thumb.jpg.b322b50da543aa25efc1dc72b5c3e609.jpg

1.jpg.226e1499c2d1793d68bb4184dd46b563.jpg

 

after that step i started printing the first pieces to find out if my plan to hold them together with threaded rods and nuts actually works:

IMG_20190527_125711.thumb.jpg.a28e0148e259d861c3ec9ba5bec00b3f.jpg

IMG_20190528_114525.thumb.jpg.b5f254a14d5ff196846019cc94091c8c.jpg

IMG_20190528_115626.thumb.jpg.6f8ecf663e32a64cb978e8cf462cba0a.jpg

IMG_20190528_121404.thumb.jpg.efc2f2b2ba3571e0429c455bf96d24ef.jpg

 

getting an actual feeling of the frame itself and it's size:

IMG_20190530_171332.thumb.jpg.9a86b5d7ddc8918f1e8dac3536cfdc42.jpg

1418875671_IMG_20190605_163721(1).thumb.jpg.2a1eb6ab13dfc546d46856dff575e9d1.jpg

Share this post


Link to post
Share on other sites
asmodz    2

always the worst part, but necessary: sanding...ALOT

(and of course alot of time went by printing all of those parts)

 

IMG_20190611_212747_075.thumb.jpg.6a0e978528ab612b885e0f87b5c38b43.jpg

IMG_20190613_143818.thumb.jpg.1a0481e58bfa11bf4386dc7f278eacfb.jpg

IMG_20190628_200425.thumb.jpg.2ba69022e4eb6f91ab6791d778fd9061.jpg

IMG_20190622_214807.thumb.jpg.19733beb512590e6afc38516853b2357.jpg

IMG_20190622_214920.thumb.jpg.598b7655b2153862832b3b207677d80a.jpg

 

Share this post


Link to post
Share on other sites
asmodz    2
Posted (edited)

cutting and rasping/sanding the front and back acrylic (5mm).

 

IMG_20190710_115024.thumb.jpg.1037c17be4aa4e25f2a93c113f620e71.jpg

IMG_20190710_180305.thumb.jpg.afc5cac8288e5a9a04a09659f5181479.jpg

IMG_20190710_173818.thumb.jpg.c70272c25c781d0af2bedc4d9ff88f20.jpg

IMG_20190711_171803.thumb.jpg.1c8c2c39613b90d80633bbab9601c7ef.jpg

IMG_20190712_154625.thumb.jpg.f795617e3692e7e587ea7f2af7940acd.jpg

IMG_20190712_180316.thumb.jpg.27140521e62b12f2a6c7f6cb15f60341.jpg

 

Edited by asmodz

Share this post


Link to post
Share on other sites
asmodz    2

printing more needed stuff...

 

spacers

IMG_20190715_150829.thumb.jpg.64327c7ead123baeb3ae5988b3d9ff93.jpg

 

psu mounting

IMG_20190725_101852.thumb.jpg.9067fb272b2c5ec573249531667be479.jpg

 

the whole lower hardware-slider

IMG_20190727_104020.thumb.jpg.0b34f1131f4203b967d87459ca49db4e.jpg

 

mainboard plate

IMG_20190727_151952.thumb.jpg.3418ced94f47d4b457caa0f80132e860.jpg

 

fan holders (although i changed them to 2x 80mm with a slot for ssd)

IMG_20190727_210948.thumb.jpg.c2d4cd1a3e3e36c43da79214537efaeb.jpg

 

wheels

IMG_20190803_230035.thumb.jpg.7b140b80354db0631a9d4eb61113f580.jpgIMG_20190803_195924.thumb.jpg.b812736737e183b8f5a684f8a20d04c1.jpg

 

and of course as you might have noticed, the frames got painted (lots of times, making the best of many mistakes...haha)

also was able to put it all together for a nice preview.

IMG_20190730_192123.thumb.jpg.2fbaa7d24c4c8a1d25b127bbfa31e040.jpg

 

 

 

  • Like 1

Share this post


Link to post
Share on other sites
asmodz    2

some updates, it's been a while since posting :)

 

testing something different - wasn't sure it would work, but it did - so i will try to make the back with a printed frame which gets filled with epoxy. (this one goes in the trash tho)

IMG_20190815_171348.thumb.jpg.f85bb59113a28c888e755d7689ebd036.jpg

 

some hardware i got from Coolermaster:

as you can see a MasterAir MA610P (i did not like the other AM4 coolers to be honest)

and 2x 90 degree 24 Pin adapter

IMG_20190819_125647.thumb.jpg.a77800fd81eda2feaacb128968315555.jpg

 

But the big boy was around 2cm to high...so what can we do? we mod it down...

- disassemble

- remove fins

- cut down pipes

-reassemble

IMG_20190819_141653.thumb.jpg.8b39017ad42a9b9e340cde2634c3cb56.jpg

IMG_20190819_142256.thumb.jpg.d6f9868813ef43c3856c6dcc592d84ca.jpg

IMG_20190819_143849.thumb.jpg.6eaac4e1d2e8149e35731ba9168cfedc.jpg

IMG_20190819_144832.thumb.jpg.a9fcbc7514ca94f2d309c4348c4d79a6.jpg

 

another thing why progress was waiting for responses (which i did not get)...

buying a GTX 1660ti afterwards b grade...and recieving a 1650 - so the card i thought fitted very well into the mod had to go back.

IMG_20190911_110504.thumb.jpg.f54d47fb18321d9dec4bc4d0be7b4f0c.jpg

 

after getting the gpu i will keep i am able keep working on the things that need to be finished. ;)

 

already printed out the back frame (if that does not work out, i will switch back to acrylic)

IMG_20190917_232809.thumb.jpg.9e7df965cbb6f34a6d1846e44dff5222.jpg

 

and a cover for the front to hide the cables (which are so annoying to put in place because it's so little space)

IMG_20190918_170931.thumb.jpg.3b7930f65a924f6337604ccfc4d82ce9.jpg

IMG_20190918_175927.thumb.jpg.dc2cd3a642052ddcc046ae2a6effc8b2.jpg

IMG_20190918_180821.thumb.jpg.e14bbc3665e9cf8817f784e122ced014.jpg

 

and before i will go ahead and do the epoxy part, i had to paint the frame

IMG_20190918_184413.thumb.jpg.da3e9e93b1b0a1fc3472d922bc7173d0.jpg

 

not that much things left to do, but time is ticking...

roughly 2 weeks is not much considering there might go things wrong :)

Share this post


Link to post
Share on other sites
asmodz    2

Last things that had to be done before making final photos of the mod.

 

the painted back frame filled with epoxy resin:

IMG_20190919_192254.thumb.jpg.db44d5b257624dd7e9e9fea56d5c53a8.jpg

 

needed a cover for the 24 Pin 180 degree adapter :)

IMG_20190922_190051.thumb.jpg.830f6ac9043ee6d92d3e981102bf48d3.jpg

 

and of course grey paint like everything else and some fitting sleeves.

IMG_20190924_152901.thumb.jpg.f7922586492eedf692d7597610ed56bb.jpgIMG_20190924_153016.thumb.jpg.689764ac5e550ddbba14b999fbe13291.jpg

 

also i finished up the last hardware by putting in the SSD (120GB SSD both sides) and the GPU - a Inno 3D RTX 2060

IMG_20190924_144248.thumb.jpg.96be69b600ee21ba1880d35fc14caba3.jpgIMG_20190924_164705.thumb.jpg.a8482882289dd966d423a1943357eed8.jpg

 

and attaching the back to the wagon:

IMG_20190925_181920.thumb.jpg.38faf82d0fbf8e92c778506105410702.jpg

 

up next will be final photos for sure ;)

thanks for following along!

 

 

 

 

Share this post


Link to post
Share on other sites
asmodz    2

final pictures time.

 

I want to thank everyone that followed along this project!

 

Note that some pictures the fan color shows as blue, but it is not (i don't have a professional camera).

Also pictures are scaled down in quality because of the 30MB limit.

Before that i want to thank my sponsors Coolermaster, AsRock, BeQuiet for their support.

 

The complete speccs of the system:

Mainboard: AsRock Fatal1ty B450 Gaming-ITX/ac

CPU: AMD Ryzen 2600

GPU: Inno3D RTX 2060 Twin X2

RAM: GSkill Aegis 8 GB DDR4-3000

CPU Cooler: Coolermaster MASTERAIR MA610P

Case-Cooling: 4x 80mm BeQuiet Pure Wings 2

FanController: XSPC 8 way PWM Splitter

SSD: 2x Gigabyte 120GB

PSU: BeQuiet SFX L Power 600W

Accessiores: 2x 90° Coolermaster 24 Pin Adapter

K1024_ASmodz_thepurplehex1.thumb.JPG.c965ffd3c8cfc1af1914d521aa0df61d.JPG

 

K1024_ASmodz_thepurplehex2.thumb.JPG.9361711e8790249cbe6244bdba015053.JPG

 

K1024_ASmodz_thepurplehex3.thumb.JPG.b3a556babdbe702a068ca38f20a489d8.JPG

 

K1024_ASmodz_thepurplehex4.thumb.JPG.6a124a9c3b3cb9e968fe518c862b8d96.JPG

 

K1024_ASmodz_thepurplehex5.thumb.JPG.6727f9d27c5b74912b4d7a2a9b31c181.JPG

 

K1024_ASmodz_thepurplehex6.thumb.JPG.b5565864872c5e55251d3404b200c9b4.JPG

 

K1024_ASmodz_thepurplehex7.thumb.JPG.54a3121a04802a2031ebe3eca114bfd7.JPG

 

K1024_ASmodz_thepurplehex8.thumb.JPG.47a8f17274b1418f46579dda6aa0b790.JPG

 

K1024_ASmodz_thepurplehex9.thumb.JPG.40c214ef9f708e17be2b84b270a1401a.JPG

 

K1024_ASmodz_thepurplehex10.thumb.JPG.3d1931ad1cac9a3250ab1dccef802340.JPG

 

K1024_ASmodz_thepurplehex11.thumb.JPG.881ffbee8813b79c61513fb3dc648ffd.JPG

 

K1024_ASmodz_thepurplehex12.thumb.JPG.c863233e155b6802e24a1a8edb6030fe.JPG

 

K1024_IMG_20191007_180628.thumb.JPG.28305ebf5aed680c12b55fd4e8c461a7.JPG

 

K1024_IMG_20191007_181223.thumb.JPG.45b7a4a260a1422882fb8f7e1f27fbff.JPG

 

K1024_IMG_20191007_181406.thumb.JPG.5b28e222ff4e45ecd797d91e57d5f9e3.JPG

 

K1024_IMG_20191007_181443.thumb.JPG.8afbf7e8c7e54c7b05108e2df8e14f66.JPG

 

K1024_IMG_20191007_181634.thumb.JPG.1257ac8ebcd151e6faac59711b5b09c8.JPG

 

K1024_IMG_20191007_182051.thumb.JPG.6ce930861f10a523e4ee011e4e62a6ba.JPG

 

K1024_IMG_20191007_182114.thumb.JPG.d38fda26e7f5a5dc40b8e736f7bd5560.JPG

 

K1024_IMG_20191007_182200.thumb.JPG.691de224acf0a3d81e2ea70ce9a7e8a7.JPG

 

K1024_IMG_20191007_182216.thumb.JPG.00357d99d91a7a62ec6cd9e19b45e892.JPG

 

K1024_IMG_20191007_182229.thumb.JPG.e1e35b61dde604976f3f89e70a272b49.JPG

 

K1024_IMG_20191007_182439.thumb.JPG.42440664bf7cf107fc8545f6afd6f6c1.JPG

 

K1024_IMG_20191007_182447.thumb.JPG.8adb7c61a009161fd3520970b2ad4576.JPG

 

K1024_ASmodz_thepurplehex1.thumb.JPG.80b2a881bf2d2a29e3eac839b6bf4c97.JPG

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.