Synchronize the LEDs with Aura Sync

[guss 0]

I have the motherboard Asus Rog Maximus X with Aura Sync, I connected the rgb / fan controller to the card, but I do not sync. How do I do it?

[Jonathan Mellette 0]

Set the case LED controller to MB (motherboard), and use the AuraSync software.

[guss 0]

I use Aura Sync software, but case leds do not command, do I have to rule out the controller?

[Vox 0]

I have the Asus Z270E mobo and the case lights sync just fine for me, did you click on the setting tab in Aura and then click Calibration? 

Edited November 22, 2017 by Vox

[azlorsiva 0]

vox can you help me,

 

i have click the calibration but the fan still cycling by it self.. my fan are masterfan pro 120.. and my motherboard Z270F

 

when i open on menu calibration there only these option,

when i click next theres checking RGB but the fan still cycling color by it self..

[knud 129]

Disconnect (or shutdown and restart pc) the sata power to the PCB and reconnect. Then select M/B on the C700P. 

It should detect  the M/B signal and you can control the lights via the asus software.

[Wiley 1]

knud, I read this solution to the Aura and LED issue. I'm assuming that disconnecting the sata power to the little controller card is a temporary measure as the case cooling fans are powered from the card? It looks like you are saying to restart the PC and then disconnect/reconnect the sata power to get this "reset"?