Project ALIEN

[Igor Below 151]

Good afternoon friends! I would like to present my project under the name of Alien  who i started doing on 9.02.2017.This is my first project but i think it should turn out interestingly. The first steps of the project were to create a sculpture. MUCH WORK WILL STILL BE EXECUTED IN THE PROCESS OF CREATION.

 

 

Edited May 19 by Igor Below
Continue work on your project, many parts are divided, honed, polished. In front, priming, and painting, after which I will rub the wax and the separator

[Raket4ik 78]

Cool!!!!!!

[Igor Below 151]

Thank you. There are still a lot of work to be done, many mistakes I make for the first time. I hope everything will work out. If you have any questions, please contact me. I will be glad to share my experience.

Edited March 16 by Белов Игорь
New information for the project I post new photos of the project, which would be even more interesting. I hope to post a video soon so that you can see more clearly. Thanks for watching

[Igor Below 151]

13 hours ago, Белов Игорь said:

Thank you. There are still a lot of work to be done, many mistakes I make for the first time. I hope everything will work out. If you have any questions, please contact me. I will be glad to share my experience.

 

[Igor Below 151]

Hello everyone will continue the theme of creating the image, after I finished creating the master model, in front of its coating, priming and waxing, after which I plan to remove the matrix of fiberglass and create a ready image. All thanks for attention please leave comments, If you like My mod bet the likes. Thanks!

[witkazy 11]

Finaly somebody had the guts to tackle Alien  Cheers!

[Igor Below 151]

In the beginning I thought about the image of a Predator, but then I decided to create Alien

[Igor Below 151]

The very materials that originally bought for the project

[Igor Below 151]

I plan to make a small retractable jaw, that it would come out of the mouth, like in the movie.I made a small jaw but it was too small, so I had to redo it. The pull-out mechanism for the jaw is expected to recover from the old dvd of the player.

[Igor Below 151]

Good afternoon I add new details of the project, I made a tank for the water cooling system, it is a glass vessel with an internal channel made in the form of a spiral. Initially it was about 30cm in length, so I had to reduce it. Now it turned out 16cm in length. There was a lot of work , As the glass is badly cut and cracked, it is very but it all ended well.

Edited March 17 by Белов Игорь
Unfortunately all the photos of the work did not manage to be done, since it would be hard to get away from work on the photo.