Sign in to follow this  
CroyAlore

COMPLETED - titan - Micro-ATX

Recommended Posts

CroyAlore    0
Posted (edited)

Hello Everybody, here is my project titan: an easy to handle, simple, and organised build.

 

Computer Components

[CPU] - Intel i7-4960X

 

[GPU] - NVIDIA GeForce GTX 970

 

 

[MB] - Asus Rampage IV Gene

 

 

[RAM] - Corsair Dominator Platinum 16GB

 

 

[PSW] - Corsair RM1000


 
Liquid Cooling Components

 

 

[RAD] - Hardware Labs Nemesis GTX 280

 

 

[GPU Block] - Ek-FC970 GTX ACX – Nickle

 

 

[Fittings] - Ek Black

 

 

[Pump] - Aquacomputer D5 Pump (Ek Top)

 

 

[Monitoring] - Aquacomputer aquaero

 

 

I had a friend Model a large amount of the parts for me, once they were modeled they were water-cut, and bent. All the metal in the case is aluminum.

 

Lmrfutw.png

 

WtxCzCl.png

 

P89YwbJ.png

 

F9RBONf.png

 

f8x7PpD.png

 

2sQVHd9.png

 

This is the placement of the Radiator, PSU, Pump, and Motherboard I want to go with:

 

cJKUgcK.png

 

KzLQefq.png

 

fqwXFQm.png

 

UH9ekkr.png

 

I wanted to make a compact loop, I wanted to make it using as little tubing as I could so I used Barrow Acrylic tubing for this part of the loop.

The water flows from Passthrough > FlowRate Sensor > Rad > Pump > Passthrough

 

BNZW7GT.png

 

cRMnatR.png

 

9xCbqbA.png

 

I went with a matte black for the color, and the secondary texture to be acylic:

 

IMctUfg.png

 

cwPCyBs.png

 

OwrT21p.png

 

gMphyWj.png

 

B0baF1L.png

 

JHZL0Sv.png

 

QVwpToi.png

 

a0W1GJA.png

 

x8dMbdf.png

 

ZWVlBkk.png

 

lrJDk54.png

 

ooQradj.png

 

cOP3B8W.png

 

I3vW54W.png

 

Un3PRIi.png

 

dOFE1m0.png

 

8mMp43c.png

 

zsO9RxO.png

 

IAHfc1h.png

 

6m8oIrK.png

 

Here is a later Mod I did to mount the Aquaero 6:

 

Jt6zd78.png

 

asqvNk0.png

 

The tray is hollow allowing me to put some LED strips as can be seen in this photo:

 

YmyNy3P.png

 

mLVHhyj.png

 

17ezRX6.png

 

WFR6aoa.png

 

8DF9AGK.png

 

The Front also has NZXT 140mm Aer Fans that is synced with the LED Tray:

 

jSV7fAc.png?1

 

IexvQRo.png

Edited by CroyAlore

Share this post


Link to post
Share on other sites
CroyAlore    0
Posted (edited)

Completed Pictures (More at Bottom):

 

OicBtNW.png

 

o5cfZpW.png

 

KjRdXp8.png

 

eqPZ3Tq.png

 

oH321Ib.png

 

uZTpXcC.png

 

naQFlnP.png

 

exiN68X.png

Edited by CroyAlore

Share this post


Link to post
Share on other sites
CroyAlore    0

Here is the completed loop. I did not need a lot of tubing at all for this build due to the compact size of the case and the use of Barrow acrylic fittings. So it did not take long to set up the loop.

 

My3gGXR.png

 

6o7ZK8M.png

 

WTF1tJE.png

 

DRWiHZM.png

 

vNWge8H.png

 

61Iab2T.png

 

5REuOkg.png

 

3StX58D.png

 

LcIEChC.png

 

DwHW11z.png

 

00YrlL4.png

 

aem7JnB.png

Share this post


Link to post
Share on other sites
CroyAlore    0

Here are more pictures of the fans, and GPU and  I/O panel.

 

gMBGkSJ.png

 

RaB0jTU.png

 

48g89Lo.png

 

PYeE1j0.png

 

NPHpQTs.png

 

AgEsVkR.png

 

haUVJLd.png

 

Trxo0Iw.png

 

zzJriM3.png

Share this post


Link to post
Share on other sites
CroyAlore    0

Hello everyone I got a update with the sleeving. I was able to do the majority of the sleeving using MDPC's Shade 19.

 

jYqE6BU.png

 

IgYKHnf.png

 

ZTztMk8.png

 

xdIpjUc.png

 

k72pn6i.png

 

vkLTWPY.png

 

hmapjLO.png

Share this post


Link to post
Share on other sites
CroyAlore    0

I got a small update for the GPU mount and sleeving.


Here's the flowrate Wire, I got a couple more wires to do in the case, but I got to wait for more sleeving to come in:

 

kRoC20x.png

 

Heres the GPU Mount, I still got to clean and paint the part, I think I will vinyl wrap it to cover the holes:

 

qjvspax.png

 

Here it is with a temporary cover:

 

TJ6Irn3.png

 

xZvp54z.png

 

1hKsBPA.png

Share this post


Link to post
Share on other sites
CroyAlore    0

Hey all, I got some more photos of the Led's for now until I figure out a way to mount the SSD/HDD's

 

Here they are (Caution for anyone sensitive to moving colors/lights):
Gif of the LED's

Share this post


Link to post
Share on other sites
CroyAlore    0

I got a quick update, Here is some of the last components to go in the case that I just finished sleeving.

 

MFoSvxB.png

 

4CZ4URt.png

 

pAJhftV.png

 

Had to sleeve these cables and replace the red connector with a white one to match the case better.

 

Jb7NGAQ.png

 

fXHVQnM.png

 

kHHf1WN.png

 

Internal USB Hub to help manage the aquaero components as well as the Hue+ Hub.
 

Share this post


Link to post
Share on other sites
CroyAlore    0

Hello all, I have finally completed the project, here are the final photos:

 

OicBtNW.png

 

o5cfZpW.png

 

KjRdXp8.png

 

cwQOBYI.png

 

N1J8kiu.png

 

2DCZPB7.png

 

aqJRLJw.png

 

uZTpXcC.png

 

eqPZ3Tq.png

 

Jjzwexz.png

 

GFoqU9n.png

 

6YyFgZB.png

 

oH321Ib.png

 

qjoS7IX.png

 

oe46Qrg.png

 

JqvfSD0.png

 

0df5Pld.png

 

OoXD0p2.png

 

naQFlnP.png

 

COdW3Hs.png

 

wWb0TKi.png

 

ie5oJxj.png

 

HIQgAd2.png

 

QnW9kY6.png

 

GVPLLv7.png

 

JrSL7Fs.png

 

IT3mXbZ.png

 

EF4fsTc.png

 

exiN68X.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this