Winged Victory of Mercy (COMPLETED)

[samca 11]

Applying the first layer of resin to be sturdy and rigid.

 

 

Edited March 31 by samca

[samca 11]

Hi guys, here's the update. The body will be finished very very soon.
And i will be working on the wings next week.
I used acrylic sheets to layer some armor for the body and used some rivets and allen bolts to hold them unto the body.

 
Here's the plan for the frame:

I used steel pipes for the frame.

 

 

Edited April 18 by samca

[Mgyovanni Mods 1]

Amazing Man!!!!!!

[samca 11]

On 4/16/2017 at 5:53 AM, Mgyovanni Mods said:

Amazing Man!!!!!!

Thanks!

[samca 11]

The metal pipes are measured and ready to be weld.

Sanded the mobo tray and checked if it will fit correctly.

 

 

 

After hours of sanding, I painted the body using a primer paint to see the imperfections and to be corrected asap.

 

The sanding made the body to achieve the curves and eliminated the sharp edges.

 

 

Edited April 18 by samca

[samca 11]

Almost there, welded the pipes together.
I decided to alter the design a little bit because of the size of the mobo. But the chassis frame is still the skeletal base of the body as you can see.
Drilled some holes to fit everything .

 

 

And here it is, finished the chassis frame. Now it's time to assemble everything from the wings and to the other details
I will use rivets to attach the mobo tray and the bracket of the parts to have a rigid and sturdy build.

[samca 11]

EVGA SUPERNOVA G3 1000w and EVGA SuperSC DDR4 RAMS  
thanks so much EVGA.

 

 

 

 

Mounting the PSU. I used 5 mm acrylic sheet.

 

GPU mount placed at the center.

 

 

I used some 3mm Acrylic sheets for the pump and res mount,

 

[samca 11]

Thanks Cooler Master Philippines for providing the Masterfan Pro 120 RGB  

Edited April 22 by samca

[samca 11]

Painted the metal frame

[samca 11]

Done with bending tubes and finished the watercooling loop.
I will be working on the wings and other details to finalize the build  

 

Edited April 22 by samca