Megadeblow

MasterCase5 MOD: Project TRON

Recommended Posts

Megadeblow    10

Today has been a good day,they say good things come to those that wait :D

The final component for the Tron build has arrived, the sexy Nvidia GTX1080 Founders Edition GPU.

Next steps are, fit the GPU water block and start working on the wiring and plumbing so I can see what space I have and add some final touches.


DSC_3568a_zpsv2src3wa.jpg

DSC_3567a_zpsvqt0z3jf.jpg

DSC_3566a_zpsn21pjipu.jpg

DSC_3559a_zpsxhtprut7.jpg

DSC_3558a_zpstydm805y.jpg


BTW, COOLERMASTER! you have done great with the forum, its working perfect and very fast now :D

Share this post


Link to post
Share on other sites
Megadeblow    10

The water block has now been fitted to the 1080 along with the backplate I painted earlier in the log.
Fitting on the side still needs to be painted white.

20161201_224944_zpsjldj5drp.jpg

Plenty of spare screws and pads came with the EK FC1080 GTX, it's been one of the easiest blocks to fit.

20161201_231029_zps1rxmfvsv.jpg

20161201_235221_zpsorma74cp.jpg

20161201_235231_zpsekmax218.jpg

20161202_192233_zpsnhaqrpp8.jpg


I'm now working on the cable covers for the MB power sockets and GPU, you will see in the last photo a small square pencil outline where the cable along with the cover will be going once cut.
Plan is to do away with cable sleeving as this is a Tron build and keep it as clean as possible with zero wires visible. 

  • Upvote 1

Share this post


Link to post
Share on other sites
Megadeblow    10
On 12/10/2016 at 2:02 AM, xtian1 said:

Great build! looking forward to see the outcome!

 

Looking forward to completing so I can put it to some good use :D 

Share this post


Link to post
Share on other sites
Megadeblow    10

Last part of the water block painted to blend better with the other parts, until the lighting is completed I'm not sure if the screws

I left black on a couple of bits will stay black or if I will change them to white/blue.
 

20161202_192629_zpshajwr2vf.jpg

 

20161210_003934_zpsvqnzlujp.jpg

 

 

Once I got the GPU and fitted the waterblock I could start to plan the wiring and tubing, one important part of the build I wanted to happen was zero wires visible
for a very clean look and to keep in line with the Tron theme. 

The biggest thing I had to cover was the main motherboard PSU socket and wires, made one by cutting and bending some clear acrylic followed
by some white wrap.
 

20161207_164201_zpspw3n3pyh.jpg

 

Taped together until the glue was set, used some clear just encase I decide to have the cover lit.

 

20161207_165717_zpsx10otswu.jpg

 

20161210_195500_zpsq12pi62j.jpg

 

 

 

 

The next ugly wire in need of a cover was the GPU PCI-E.


20161206_202130_zps6ktakc8i.jpg

 

20161207_103407_zpsshfnvgun.jpg

 

20161207_110505_zpsvvw6hzav.jpg




On to my first time with PETG hard tube, the one im using for this build is EK-HD PETG 2/16mm Tube.

It's a lot more easy to work with (cutting and bending) than the normal acrylic hard tube and the only notable difference is slightly less shine
when I have them side by side.

20161210_200054_zpswktsdwq1.jpg

 

20161213_134908_zpslw6g5cht.jpg

 

20161214_181431_zpsmk3cjo8b.jpg

 

20161213_135818_zpsvr53kdqp.jpg

 

20161214_184310_zpsuujzaww0.jpg

 

 

Didn't order enough tube :( so until the extra tube arrives I moved on to the wiring and switches, only having 2 main switches for the Tron lighting, EL Tape / EL Wire, the other parts will by remote only. 

 

I did try with some ring light switches as I have used on a couple of other builds, but the light just didn't look that great with the Tron design so went with plan switches. 

 

20161219_175249_zpsxn3pv55p.jpg

 

20161219_180227_zpsq0nrcyjj.jpg


20161219_175317_zpsf3keqyvl.jpg

The switches can be placed/move to any of the 2x bays at the top of the case, for now there in the top slot.

The 2 big inverters are from EL Wire&tape AKA wirecraft, the small one if from China, apart from the size you can also feel the deference in quality.
Switches are now connected to the inverters and working a treat. 

 

Now I just have to add the last tube, fill with water to check all is well then play with the water colours I got from EK, and some other finaly touches.
Also my good freind Marco at F3nix Mods is cutting me some last minuet logos. Thank you mate :)


So very soon after the Christmas break the project should be completed, I'm looking forward to testing out the 1080 mostly, especially with some VR games.



Have A Great Christmas & Fantastic New Year!

Rob (deblow) Deluce
 

Edited by Megadeblow

Share this post


Link to post
Share on other sites
Megadeblow    10

After a couple of delays I'm glad to report that the Tron project is complete! :D

I should have the final photos up during the next day or so, but today I just want to post some pics to completed the build log progress.


During the Christians holidays I finished of all the wiring but had to make a plan to light the sides panel edged but in a 
way that would keep them removable for maintenance. 

I'm using a the toughen tinted glass as the main window side and on the other side im using the panel I did the Tron airbrush work on, but I also 
have a clear plastic panel and plane black so might be having a swap around now and then.

20161220_203055_zpsaukcaq0q.jpg

The back and bottom edges are attached to the panel and the other side are on the case its self.

20161220_203101_zpsie3w1ljj.jpg

20170102_152034_zpshy1awj3i.jpg

Once the wire was glued in to place I had to do a couple of quick release connections for both the side and I ran the wires behind a removable cover plate I made from some plexi.

20170103_183227_zpsfpxoljrp.jpg

20170103_183236_zpsoou3xnbv.jpg

20170102_152020_zpsufzrv1rh.jpg


The logos for the bottom of the case also arrived this weekend so I finished of the PSU cover and added some lighting 
very tight squeeze behind the logos as I have the PSU, wires, tubing and a quick release for swapping out the water.

16106144_1345682025504185_842499773_o_zp

DSC_3914_zpsfvrpkm3p.jpg

Once I was happy with all the lighting I filled her up with some clear water to flush out any crap that might have got in during the build.
didn't take long to get the bubbles luckily :)

20161227_191759_zps2plcesle.jpg

Filled up with some shades of blue and a white before decided to go with a pale blue.

Also I mentioned earlier in the build that I wasn't sure if I would be sticking with black screws & bolts or painted them.
I did decided not to stick with black but instead of painting them I went ahead and polished 
them to a nice chrome looking finish that matches up better to a couple of the EK fittings. 

20170102_163334_zps5ne4uj8e.jpg

20170102_164113_zps2axw41lz.jpg


To finish of the build I covered all the delicate bits and gave the whole case another quick buff and polish as it had picked up some minor scratches
over the build progress as you can see under the light in the photo below.

20170106_175847_zpso3lpwkws.jpg


So thats it for the build log, I will be back soon with the final photos and then eventually a video hopefully :)

Edited by Megadeblow
  • Upvote 1

Share this post


Link to post
Share on other sites
Megadeblow    10

Today I will post what final photos I can, might take me a couple of days due to the slow 
server i'm using for the photos..

I do plan to upload a lot of photos but I will try split them best I can.
Really want to show the case under all lighting conditions and with as many options 
as possible covered to help answer questions before you even ask :D

There's always someone that asks, but what's it look like in the daylight, what if it gets wet! ??? :D

I know you will have already seen the paintwork if you followed the the log but I have done some extra buffing and a nice wax 
polish to protect one of the hardest paint jobs I ever attempted and my first ever proper style airbrush, not perfect but better than I expected tbh :)

So, 1st photo is one I put together with the sponsors listed to show some respect.
stuck mini Tron in there also, cos he's cute.
white Tron is deep within my bike shed but I will dig it our at a later date for full family shoot lol

Main%201_zpskl0fo24p.jpg

DSC_3787a_zpsfzm3lxnt.jpg

DSC_3794a_zpsvziafxfq.jpg

DSC_3801a_zpson32i0f9.jpg

DSC_3796a_zpsgvln5ioc.jpg

Very happy with the internal layout and colour, I had used some other colours and tube directions but went with this one for a couple of reasons I 
will go over when I post the older photos (test shots)


MINI and big Tron..
(very low light)

DSC_3919b_zpsqsq9nx2k.jpg

DSC_3924a_zpszp7kd6sy.jpg


(LED kitchen lighting on)
I will mention the lighting now and then so you better understand how the case lighting and paintwork are reacting under them conditions. 
Hope this will be useful to some of you.

DSC_3832a_zps3l46eoyw.jpg

DSC_3833a_zpscnxy7onl.jpg

DSC_3932a_zpsbcdcrhk5.jpg

DSC_3916a_zps4wf8hray.jpg

The front disc is removable, should be some photos up later showing with and without the disc.

DSC_3839a_zpsziwwdtyf.jpg


Reflection looks better than real life :o
thanks to the spot lights messing with my hand..

DSC_3908_zpshfzy8fyp.jpg


Like the sides, the front is also removable.

DSC_3934_zpsty5m3o44.jpg

DSC_3935a_zpslsa3dftc.jpg

DSC_3938_zpsvcgbeupt.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now