Sanjib Ray

Scratch Build Metal Hero

Recommended Posts

Sanjib Ray    1
Hi… this is all about a new project, and this time it is a scratch build. 
 
The basic idea was to plan and design a cabinet that would hold the motherboard and all other accessories like GPU, cooling system, HDDs, PSU etc. in a most convenient way. Oh yeah, and it had to look awesome as well!
 
First I thought about the places to put the components—especially the motherboard, the cooling system, Hard Disc bay and the PSU.
 
Hard Discs and PSU are by far the least heat generating components and hence placed at the bottom of the case.
 
What I concentrated most is the placement of the motherboard. After using quite a few different cabinets and the placement of the mobo in 2 different ways, I always felt that if the mobo is placed at right angles to the traditional setup then it would be optimal for the cooling setup. In a usual system hot air from the GPU usually makes the inside of the cabinet hotter. It also goes up heating up the CPU VRMs and then the hot air actually goes through the radiator if it’s placed on the top. But in case of a horizontal tilt the hot air moving up ventilates through the top and very less goes to the CPU area. This has one caveat though: the usual top mounting radiator position becomes unavailable.
 
22935590086_3cf21d329a_o.jpg
 
So I thought of putting the radiator on the right side of the mobo, i.e. on the front of the cabinet. The reservoir with the pump in front of it.
 
 
I started working on this and made a few designs in 3D to see how it was going to look. Then chose a favorable design, worked on the placements and took proper measurements.
 
22569447169_48a8e32c77_o.jpg
 
Here I got a massive help from the Asus India. After showing a brief presentation on the concept they extended their hand to provide me with a motherboard, processor, graphics card and memory modules. With the new hardware on board, I started thinking about evolving the design a bit.
 
A lightbulb flashed all of a sudden inside my head – why not make this a test bench?
 
There are multiple plus points of making a case a test bench type. First and foremost easy removability of hardware, which was a priority in my case. I always tinkered with multiple stuff, and it made perfect sense. But changing the case to a testbed required minor changes. Most importantly, the cooling system would have to fitted and planned in a way that the hardware could be swapped or changed effortlessly.
 
22543297118_368eec6bfb_o.jpg
 
22543250097_f5a768e88f_o.jpg
 
Now its time to choose the name for the build. While looking at the design the first thing came in my mind is the word Hero, and as am going to make a test bench and metal work is going to be there so why not Metal Hero. 
 
22948413352_aa0fba6e9f_o.png
 
Now to start the work, need the structure design.
 
22948368572_4a87645ab9_o.jpg
 
I chose Aluminum L channels to make the basic structure and started working on it. 
 
22543253387_b769280c3a_o.jpg
 
22936123876_6847ed6e78_k.jpg
 
22339274224_de4e68a7af_o.jpg
 
As the work progressed I found out that I was unable to keep the right measurements all the time and hence the structure wasn’t going to be precise enough and hold everything in their right places.
 
So as I was looking for some other alternatives, the first thing that came in my mind was to use wood. I got some 1†x 1†6ft long wooden bits to start with, and then bought some tools and found out its easier to work with, so slowly moved forward and completed the basic structure.
 
22957126356_45693db2ed_k.jpg
 
22362023543_58262f1787_k.jpg
 
Wheels and base added to the structure:
 
22957154866_7c3203e917_k.jpg
 

Time for some Stress Test.... 
 
22980365946_37b233601e_k.jpg
 
After successful testing time to check the positions of the psu and radiator. 
 
22385254663_465d6e21e7_k.jpg
 
Thanks a lot ASUS India for giving me the Maximus Hero, gtx 980 matrix and 6600k.... along with DDR4 ram.... 
 
22588051857_3dd7493b42_k.jpg
 

[/color]Now its time to mount the mobo and the essential stuffs, to check the positioning and to move on with the work. Again many many thanks to Asus India for their immense support in this project.... 
 
22769861019_e178253400_k.jpg
 
23111709886_56fc0af879_k.jpg
 
23137801805_2130c7d0d1_k.jpg
 
23137786575_ec59215cf0_k.jpg
 
Now its time to put the xspc raystorm Cpu block with custom brushed metal finish bracket... and 90* rotary adapters
 
22769797789_c9ac71ceb0_k.jpg
 
Firstly the idea was to put Aluminum brushed metal look on red acrylic, but the sticker was not good and after some time it started swelling so just peeled them out and ... 
 
23148129172_8b489a78ec_k.jpg
 
23137742095_b01552019f_k.jpg
 
23148072792_1c6e13a953_k.jpg
 
After the paint job this is how the laser cut logos r looking like.... 
 
22743577097_59ee1ba31c_k.jpg
 

The fittings- extenders, 4 way female, both side male and many more just to put my imagination in reality....
 
23242464686_7910bd0d12_k.jpg
 
To take the measurements and finally how its going to look with the fittings and the tubes
 
23268479535_11fe167cb8_k.jpg
 
A bit of metallic touch to the GPU
 
22874457407_e3deeb71d9_k.jpg
 
Now its time to cover the laser cut gaps and make them look great, so planned for a backlit thing and covering the gaps with Red stickers.
 
The Front:
 
22874441137_3512902b45_k.jpg
 
The Back:
 
22640126844_a5ad23a938_k.jpg
 
This is how its going to look .... 
 
22972696320_e704b56860_k.jpg
 
using the 60 led/m 5050 SMD led tfor the backlit thing, 
 
23268520875_6481caaf8c_k.jpg
 
so time to put the cover on the main body now..
 
23242359046_ee3b7c0d9d_k.jpg
 
22900560439_34bcce8365_k.jpg
 

Final Update.....
 
Time for some Premium Sleeved cables from TweakedPC... with custom length and colour scheme along with Black Cable Combs
 
The 8 [4+4] pins
 
26658311145_d9af82e308_k.jpg
 
The 24 Pins
 
26054335533_7b67c77645_k.jpg
 
The Full set of Grey Red and Black themed sleeved Cables
 
26385136610_965ffa8d89_k.jpg
 
Some addition to the black D5 pump and the Pump Top...
 
26658288915_65026ec00a_k.jpg
 
The Bend Rigid Tube 
 
26054293393_4705555768_k.jpg
 
Now its time mount all the coloured parts and panels with a slight change in the panel from the previous post. As Asus India gave me a surprise upgrade from Maximus Hero to Maximus Hero Alpha, The motherboard that comes with the inbuilt LED connectors so i changed the Red coloured back lit vinyles to translucence vinyle that can show the colour of the LED...
 
26658277835_353b73e7a9_h.jpg
 
26054288993_faba3f98d8_h.jpg
 
26658275705_a7c7ed53b7_k.jpg
 
After putting up all the things, couldnt wait for a test run... and the main idea of Light coming trhough the rigid tubes and the coloured bubbles running through it, came out really well.. as expected..
 
26054287253_b0f6afbf0e_h.jpg
 
Now for the final outcome and the beautiful show of the Hero Alpha LED connectors and the Aura software
 
26052505234_bd10313e26_k.jpg
 
26052502514_5fa359f40e_k.jpg
 
26564952752_8f10962cd6_k.jpg
 
26658271405_42ab81cf1c_k.jpg
 
26564950382_91ba0a3f96_k.jpg
 
So this is Metal Hero... the Scratch Build powered by Asus India and and build exclusively for them...
 
26564949502_7f004dac62_k.jpg
 
---------- Post added at 10:18 PM ---------- Previous post was at 09:30 PM ----------
 
Here is the video of the whole project.... to witness the cool light effects that this mobo can do
 

 

  • Upvote 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now