Marinus

KAM - the wall mounted PC

Recommended Posts

Marinus    5

Hy to everyone! My name is Marin and I'm from Croatia.
 

The purpose of the KAM project is to design living space thematically. The Computer will be set on the uniqely constructed wall.
Theme of the KAM project is ancient, but at the same time sc-fi, which is the reason why this design has specific and unique look.


This is my first bigger and more serious project. I am a self-taught so almost every technique I used, I used it for the first time. Due to financial reasons I did not have the best tools possible, but I did my best to make most of  the tools I had.

 

I wasn't (financially) supported by any firm so all material was bought on my own expense. Considering I am still a student I hope this could also bring me some professional commentary on my work and help me get the free artist title. 


 Take a look on a FB profile
To do list:
 
1. Make a  rusty, 30 years old table saw work. :)
post-103886-0-87557600-1462654044_thumb.jpgpost-103886-0-03029500-1462689246_thumb.jpg

 
Edited by Marin Filipcic

Share this post


Link to post
Share on other sites
Marinus    5

I had a lot of work to do so i didn't have time to upload photos. 
Next fase is cutting styrofoam and fixing to a plywood. 

Concept of wall.


post-103886-0-44958200-1463601364_thumb.jpg

I use 5 cm depth styroam for a wall decoration. 

post-103886-0-96455000-1463598542_thumb.jpg

Here I'am cutting one of the wall decorations

post-103886-0-43233500-1463598557_thumb.jpg  post-103886-0-57861100-1463598563_thumb.jpg

post-103886-0-77274700-1463598577_thumb.jpg

post-103886-0-62172600-1463598550_thumb.jpg

post-103886-0-11994500-1463598570_thumb.jpg

post-103886-0-69448500-1463599289_thumb.jpg
post-103886-0-00406300-1463599298_thumb.jpg
post-103886-0-81003300-1463599293_thumb.jpg
post-103886-0-98747700-1463599301_thumb.jpg
post-103886-0-70116000-1463599307_thumb.jpg
post-103886-0-94599600-1463599311_thumb.jpg

post-103886-0-91185700-1463598585_thumb.jpg

post-103886-0-19058900-1463598591_thumb.jpg

Stay tuned! :)

Edited by Marin Filipcic

Share this post


Link to post
Share on other sites
Marinus    5

I need first to cut every element of styrofoam to set correctly on plywood before gluing.

post-103886-0-92880700-1464115909_thumb.jpg

This is a left side of "chamber"
post-103886-0-10385600-1464116145_thumb.jpg

Before and after

post-103886-0-43802800-1464115915_thumb.jpgpost-103886-0-36499800-1464115926_thumb.jpg
post-103886-0-00906200-1464115921_thumb.jpg




tomorow goal is to make a wooden case.

post-103886-0-29172200-1464117010_thumb.jpg


Stay tuned ;)

 

Share this post


Link to post
Share on other sites
Marinus    5

today I made a PC "chamber"

post-103886-0-21525700-1464204066_thumb.jpg
post-103886-0-14549100-1464204072_thumb.jpg
post-103886-0-79844000-1464204075_thumb.jpg
post-103886-0-34771900-1464204081_thumb.jpg
post-103886-0-42698100-1464204087_thumb.jpg
post-103886-0-24246700-1464204094_thumb.jpg

After several hours of brainstorming about cooling solution, I decided for this solution.


post-103886-0-24903600-1464204404_thumb.jpg

Fan slot conception

post-103886-0-51407000-1464208353_thumb.jpg
post-103886-0-41662900-1464208357_thumb.jpg
post-103886-0-25923000-1464208391_thumb.jpg

post-103886-0-00078600-1464208446_thumb.jpg
post-103886-0-63278300-1464208449_thumb.jpg

post-103886-0-61126200-1464208462_thumb.jpg
post-103886-0-05929900-1464208466_thumb.jpg
post-103886-0-45662100-1464208469_thumb.jpg

And finally assembled "chamber"

post-103886-0-52906900-1464208606_thumb.jpg

  • Upvote 1

Share this post


Link to post
Share on other sites
Marinus    5

Primarily base for top cover

post-103886-0-71079500-1464551501_thumb.jpg

post-103886-0-41920800-1464551632_thumb.jpg
post-103886-0-94462900-1464551636_thumb.jpg
post-103886-0-39834000-1464551640_thumb.jpg

After that I'm made base sides

post-103886-0-01864300-1464551684_thumb.jpg
post-103886-0-00855400-1464551688_thumb.jpg

Drawing angle of 30 degrees

post-103886-0-84278500-1464551691_thumb.jpgpost-103886-0-51296700-1464551696_thumb.jpg
post-103886-0-60915000-1464551700_thumb.jpg
post-103886-0-31650900-1464551704_thumb.jpg

... gluing

post-103886-0-33019200-1464552561_thumb.jpg

Stay tuned ^^

Edited by Marin Filipcic

Share this post


Link to post
Share on other sites
Marinus    5

first base of top is done, after that I made flange for pvc pipes

post-103886-0-85367500-1464819785_thumb.jpg
post-103886-0-32946800-1464819789_thumb.jpg
post-103886-0-04748900-1464819793_thumb.jpg
post-103886-0-85720700-1464819796_thumb.jpg
post-103886-0-19476300-1464819800_thumb.jpg

Cutting plywood for outsides of hexagon. 

post-103886-0-33238100-1464820206_thumb.jpg
post-103886-0-60779900-1464820209_thumb.jpg
post-103886-0-12168400-1464820213_thumb.jpg

Bottom view for fan panel. 

post-103886-0-47676500-1464820216_thumb.jpg

post-103886-0-15580700-1464820220_thumb.jpg

Drawing a blueprint for a wall control board.

I will use this control panel for turning on PC, for fan speed controlling, and turning on lights in my room. 
Material: Plywood


post-103886-0-75871900-1464820715_thumb.jpg
post-103886-0-20766600-1464820719_thumb.jpg
post-103886-0-52438000-1464820722_thumb.jpg

Next  step: do the metal effect with polyester putty 


Stay tuned ^^

 

Edited by Marin Filipcic

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.