Gamerznation

blackNred Wall mount by GamerzNation

Recommended Posts

 

About me :

Vinay Agrawal from India 

I build rigs and Workstations for people with name of GamerzNation

you can visit me at https://www.facebook.com/Gamerznationpune/

this build is for watching movies and playing mid level games on TV in the living room!!

 

 

This is my try to build a wall mount machine using the folliwing components

asus h97-pro

i5-4440k

corsair vengeance

GTX 650

this build focuses on looks than performance its a light weight machine to add Next gen look to the living room next to the TV.

 

stay tuned!!

Edited by Gamerznation

Share this post


Link to post
Share on other sites
Overview
 
This was my project for a wallmount which will be used for watching movies and playing
 
light games.Basic theme is Black and Red for this wallmount
 
Required
 
1. Wood plank with thickness more than 5mm.(not heavy just enough to hold weights)
 
2. Acrylic sheets with thickness 3mm or 4mm(not more than 5mm)
 
3. Basic tools(drilling machine,sandpaper,screwdriver, etc)
 
4. Soldering gun
 
5. Led strips
 
6. Glass holders
 
7. Carbon fibre vinyl
 
8. Screws, nut bolts etc .
 
 
 
Components used:
 
Asus h97 pro
 
I5-4440k
 
Galaxy Nvidia GTX650 1GB
 
1TB seagate barracuda
 
Xpro Bulldozer 500w
 
 
 
 
 
Day 1:
 
Marking were done on the plank using pencil.every cutout has to be precise for
 
good wire management.
 
Use components and mark their outline leaving 1 cm margin.Consider all the wires
 
going in and out for marking the holes .
 
Make holes in the centre of each components to make a way for led light .
 
 
gallery_105681_148_66413.jpg
Day2:
 
Cutting were done by borrowing wood cutter from power tools store.
 
Placing every component and checking whether the cutting are perfect or not.
 
Seems perfect no need of extended sleeves for motherboard power and 8 pin cable.
 
 
gallery_105681_148_764389.jpg
Day3:
 
Measure components outline and make a acrylic sheets for it.
 
Cutting can be done using fine hand saw or dremel.
 

gallery_105681_148_1198162.jpg

 
 
 
Edited by Gamerznation
  • Upvote 1

Share this post


Link to post
Share on other sites

more progress :

DAY 4:

acrylic sheets edge is polished for 45 degree angle for reflecting light

gallery_105681_147_172715.jpg

 

this supporters are used for holding the acrylic panel at place for graphics card support

gallery_105681_147_431211.jpg

power button made using screw cover and power switch

gallery_105681_147_1170851.jpg

 

 

 DAY 5:

putting every thing on place.L brackets are used for holding PSU

 

gallery_105681_147_1147508.jpg

essentials painted black

gallery_105681_147_1368760.jpg

DAY 6:

carbon fiber vinyl applied ,sheets are drilled in middle for LED light placement to allow light to enter acrylic 

gallery_105681_147_283593.jpg

testing sheets look after vinyl

gallery_105681_147_283593.jpg

 

wall mount without led lights 

gallery_105681_147_1158291.jpg

DAY 7:

wall mount with led lights at back installed

gallery_105681_147_1080724.jpg

gallery_105681_147_293982.jpgDay 8:

Led light on the edges

gallery_105681_147_109432.jpg

DAY 9:

after finishing and minor details 

gallery_105681_147_1080724.jpg

thank you guys for taking a look

 

 

 

 

wallmount at night
gallery_105681_147_342638.jpg

 

 

 

thank you guys for stepping by:D

Edited by Gamerznation

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.