Recommended Posts

MonsterMawd    33

gulf_porsche_1_cooler_master_mastercase_

 

I'm honored to be invited to share my Mastercase case mod with so many talented pc case modders worldwide. I'm creating a new case mod with Cooler Master's Mastercase 5 / Pro Mid Tower. "Mastercase Racing" will be the catalyst for new bolt-on accessories and modifications for this case by Mnpctech. The custom paint finish will be inspired race by Steve McQueen's GULF PORSCHE 917 from his 1971 movie, "Le Mans."

 

gulf_porsche_1b_cooler_master_mastercase

 

The MasterCase Mid Tower draws it's inspiration from Cooler Master's MasterConcept from 2016 CES. Cooler Master wants you to have absolute control over how your case looks and functions. You can adjust the exterior structure and it's look through a range of replacement panels and doors. Each choice changes the look of the exterior while giving you flexibility of the interior layout. Order a new Mastercase 5 or Pro from Newegg, HERE

 

gulf_porsche_1c_cooler_master_mastercase

 

The legendary PORSCHE 917 is the inspiration for the custom paint on this case mod. The 917 only raced for three seasons. It placed 1st in fourteen of the twenty one races it entered 1969 through 1971. The only Gulf Porsche 917 to win the 24 Hours of Le Mans was the one driven in Steve McQueen's "Le Mans" movie. His 917 from the movie was chassis # 022 and purchased in 1970, from the Porsche by Steve McQueen's movie production company, Solar Productions. It was also the company that would bring the movie "Le Mans" to the big screen. This is the car that McQueen's character, Michael Delaney, starts the race in, and "crashes" late in the race, "writing the car off." The car that was crashed was really a Lola T-70, painted and rebodied, to look like a 917. Many innovations in cinematography, were first tried in this movie. They even went so far, as to weld brackets to the front frame work of the 917, so they could mount a camera to shoot Steve, and the other drivers, in the cockpit. I'm debating about replacing the #22 with #5 to represent the Mastercase 5. 

 

mastercase_5_pro_clear_side_window_panel

 

Display the hardware in your Cooler Master MasterCase Pro & 5 with the "Easy PC Mastercase Window Panel" It allows a full view inside your PC without any obstructions. "Easy PC Window Panel" is professionally laser cut from 1/8" thick 100% cast acrylic. It has embedded magnets to make installation and removal fast and easy. The window panel is the same size as the factory steel panel for the Cooler Master MasterCase Pro & 5.

 

 

gulf_porsche_2_cooler_master_mastercase_

 

The Mastercase 5 chassis and exterior parts before prepping them with Red Scotchbrite for our custom paint finish. I will be utilizing House of Kolor and PPG products. 

 

gulf_porsche_1_gigabyte_GA_Z170X_SOC_For

 

Here is the hardware I'd like to use for the "Mastercase Racing" Gaming PC build, but my budget may have to be limited for another personal project. I'd love the INTEL Core i7-6700K 8M Skylake Quad-Core 4.0 GHz LGA 1151 91W processor to be our race car engine. My first choice of motherboard is GIGABYTE's GA-Z170X-SOC FORCE. It's touted as the ultimate Z170 "Super OverClock" solution from GIGABYTE. It also offers a vast array of user features that includes 22 phases of digital power, cool new OC Touch buttons, durable PCIe slots with metal trim. The SOC FORCE has a large heat sink layout with heat pipe dissipation system and water channel technology to incorporate hybrid cooling through air and liquid supply. This allows the VRMs and MOSFETs to stay cool under load when voltages are pushed high

 

gulf_porsche_1_corsair_dominator_DDR4_li

 

 

gulf_porsche_9n_cooler_master_mastercase

 

Brad is applying final coat of Gulf Racing Orange paint, this was custom mixed from specs for the 1970 Porsche 917 race car from Steve McQueen's movie, "Le Mans" We applied this paint to the EK radiator and misc Mastercase accessories

 

gulf_porsche_9o_cooler_master_mastercase

 

gulf_porsche_9p_cooler_master_mastercase

 

gulf_porsche_9q_cooler_master_mastercase

 

gulf_porsche_9r_cooler_master_mastercase

 

gulf_porsche_9s_cooler_master_mastercase

 

gulf_porsche_9t_cooler_master_mastercase

 

gulf_porsche_9u_cooler_master_mastercase

 

gulf_porsche_9v_cooler_master_mastercase

 

We'll be replacing the #22 with #5 to represent Cooler Master's Mastercase 5

Edited by MonsterMawd
  • Upvote 2

Share this post


Link to post
Share on other sites
MonsterMawd    33

Porsche 917 inspired graphics are finished on the Cooler Master Mastercase 5 / Pro. Next stage is clearcoating everything.

gulf_porsche_9y_cooler_master_mastercase

gulf_porsche_9z_cooler_master_mastercase

Edited by MonsterMawd

Share this post


Link to post
Share on other sites
MonsterMawd    33

gulf_porsche_7_cooler_master_mastercase_

The front I/O panel on the Cooler Master Mastercase 5 / Pro is a bit bland for this theme. I decided to modify it with something that looks more "race car" appropriate. I'll start with steel face plate and chose some switches and controls from Mnpctech that include a red "Fighter Pilot" with momentary toggle for Main Power. The reset will be blue anodized vandal resistant push. I also found a VDO brand 12 volt gauge from the center console of a Volkswagen Rabbit GTI. I'd love to find some mounting bezels for 5mm LEDs for Power & HD activity.

gulf_porsche_8_cooler_master_mastercase_

gulf_porsche_9_cooler_master_mastercase_

The switches will be mounted with Mnpctech's billet vandal switch mounting plate. Here is all of the custom switch and toggle parts with links to their product pages. Mnpctech is the only source for "Military Pilot" Toggle switches modified for use with your custom PC. Fighter Pilot / Race Car Ignition Toggle Start with red cover, http://mnpctech.com/bulgin-modmytoys-computer-pc-power-reset-switch-mounting-plates-vandal-anti-resitant-lamptron/

spst_toggle_pc_computer_install_guide_po

blue_anodized_bulgin_lamptron_mod_toy_va

Order blue vandal switch for your PC power or reset, [url=http://mnpctech.com/bulgin-modmytoys-computer-pc-power-reset-switch-mounting-plates-vandal-anti-resitant-lamptron/]http://mnpctech.com/bulgin-modmytoys-computer-pc-power-reset-switch-mounting-plates-vandal-anti-resitant-lamptron/

SPST (Push for Momentary, IP-67 rated, CMP #MP19S-F10, Flush Flat Button, Metal Body, SPST-NO, Push button switch. Mounts in a 3/4" hole. Contacts Rated 5A @ 110VAC, 5A @ 220VAC. Compression screw Terminals. VDE/CE listed, RoHS Compliant.<br>

lamptron.delrin.bulgin.silvervandalswitc

Order Mnpctech Pro-Line Two switch mounting plate, [url=http://mnpctech.com/bulgin-modmytoys-computer-pc-power-reset-switch-mounting-plates-vandal-anti-resitant-lamptron/]http://mnpctech.com/bulgin-modmytoys-computer-pc-power-reset-switch-mounting-plates-vandal-anti-resitant-lamptron/

Mounting plate has 22mm hole and 16mm hole. It fits Bulgin, Delrin, Lamptron, and ModMyToy Vandal Resistant Switches. Machined by Mnpctech in 6061 billet aluminum. Length = 3.5" x Width = 1.5" x Thickness = 3/16" Bulgin Mounting Plate Includes: 4, 6/32 x 3/4"screws and nuts.

gulf_porsche_9a_cooler_master_mastercase

Replace your PC Power or PC Reset button with this Blue Anodized Vandal Resistant Switch. Made of Nickel Plated Brass.

gulf_porsche_9b_cooler_master_mastercase

gulf_porsche_9c_cooler_master_mastercase

gulf_porsche_9d_cooler_master_mastercase

gulf_porsche_9e_cooler_master_mastercase

gulf_porsche_9f_cooler_master_mastercase

gulf_porsche_9g_cooler_master_mastercase

gulf_porsche_9h_cooler_master_mastercase

gulf_porsche_9i_cooler_master_mastercase

gulf_porsche_vdo_cooler_master_mastercas

LED_5mm_holder_black_darkside_superbrigh

darkside_5mm_sleeved_led_gaming_pc_compu

darkside_5mm_superbright_sleeved_led_gam

gulf_porsche_vdo2_cooler_master_masterca

gulf_porsche_vdo3_cooler_master_masterca

gulf_porsche_vdo4_cooler_master_masterca

The upper portion of the black base for the RED Toggle Switch will be shortened later.

Edited by MonsterMawd
  • Upvote 2

Share this post


Link to post
Share on other sites
MonsterMawd    33

GULF RACING theme Cooler Mastercase 6 / Pro Chassis assembled and ready for mounting EK XTX 360 radiator next.

gulf_porsche_9z8_black_pop_rivets_4_cool

gulf_porsche_9z9_black_pop_rivets_4_cool

gulf_porsche_9z9a_black_pop_rivets_4_coo

gulf_porsche_9z9b_black_pop_rivets_4_coo

Share this post


Link to post
Share on other sites
MonsterMawd    33

Thank you for watching and commenting Mohd!

The Cooling fans I'm using in this Cooler Master Mastercase 5 / Pro case mod are 120mm PROLIMATECH Ultra Sleek Vortex. This is 2nd time I've used these fans in custom build and love them. They're 15mm thick, which helps save space. Especially when mounting radiators in the top panel and you need to free up space for accessing RAM slots or installation of liquid fittings, tubing etc. The Prolimatech USV 12 fan is not only thin, but also offers superb performance. It provides the highest static pressure of all 120mm fans, making it an excellent choice for water coolers and other radiators with narrow fin spacing!

gulf_porsche_4_cooler_master_mastercase_

I've painted the fan blades GULF RACING orange to match our theme. You can remove the fan blade hub by using a flat head screw driver to pop off the white retaining ring.

gulf_porsche_5_cooler_master_mastercase_

gulf_porsche_6_cooler_master_mastercase_

Next step is prepping the surface of the blades for primer base coat before we can apply the color coat.

gulf_porsche_6a_cooler_master_mastercase

gulf_porsche_6b_cooler_master_mastercase

gulf_porsche_6c_cooler_master_mastercase

Edited by MonsterMawd
  • Upvote 1

Share this post


Link to post
Share on other sites
MonsterMawd    33

I know my choice of cooling fans is controversial, but nothing in my personal builds is ever permanent. For anyone with a Cooler Master Mastercase 5 / Pro who liquid cools and pondered about the maximum radiator thickness you can install, between the chassis and the front bezel, I've outfitted mine with EK's XTX 360 that measures 64mm thick, but not without two compromises. You'll need to create a custom front grill for the bezel, as factory one will no longer fit. You also need trim the backside of the upper horizontal brace under the 5.25 bay location.

Dimensions (LxWxH): 400x130x64mm

Weight: Approx. 1496g

Liquid Capacity: Approx. 510 ml (17,25 fl oz)

FPI: 11

Fan installation: 12 x M3 threads on both sides each (for 3x120mm fan each)

Pressure tested: 1bar

gulf_porsche_9z9c_EK_XTX_360_radiator_co

gulf_porsche_9z9f_EK_XTX_360_radiator_co

gulf_porsche_9z9g_EK_XTX_360_radiator_co

gulf_porsche_9z9h_EK_XTX_360_radiator_co

gulf_porsche_9z9i_EK_XTX_360_radiator_co

gulf_porsche_9z9j_EK_XTX_360_radiator_co

  • Upvote 1

Share this post


Link to post
Share on other sites
MonsterMawd    33

For the EK 360 XTX Radiator I'll be using Nidec-Servo's Scythe Gentle Typhoon (Model# D122C). This fan has been regarded as the best static pressure optimized fan by DIY PC community since it's release in 2008. The original D122C is no longer made, but there is limited stock available at some online retailers. Last year the D122C Scythe GT fan was resurrected and manufactured as "Darkside Black Edition" by Dazmode. It's the same specs as the original, but now has Black fan blades. Many PC Modders including myself have painted these fans to fit the color schemes of our custom PC builds. I've been asked several times over the years how to remove the metal c-clip without losing or breaking it?*This is my DIY guide to removing and installing external retaining ring or c-clip. Like many others, I've also lost these tiny c-clips while learning the best technique for handling this task.

Nidec-Servo's Scythe Gentle Typhoon Factory Spec PDF link, http://www.nidec-servo.com/en/digital/pdf/D1225C.pdf*

Speed: *2150RPM

Air performance : 68.8CFM

Nose: 34db (25cm from the fan, free air)

Power: 12VDC, 0.123A (0.63A peak max)

Operational voltage range: 5-12V (~900rpm-2150rpm)

Bearing: Ball

Expected life: 100000h/35c or 55000h/60c

Appearance: Full black

Dimensions: *119 x 119 x 25 mm / 4.68 x 4.68 x 0.98 in

WARNING:

Perform this task with Safety Glasses, the tiny Black metal retaining ring (c-clip) can and likely will pop off, so perform this task in a clean workspace, so you can find it. I suggest doing the work on a large white bed sheet and holding a large magnet near the fan hub as you remove and re-install the c-clip, to increase you're chances of not losing the c-clip. I haven't found a source for ordering replacement c-clips yet, but I'm still searching.

apart_1_disassemble_pc_cooling_fan_clip_

Here is my suggested Tools & Supplies

Safety Glasses (not pictured)

Heat Gun for removing the fan label. Hair Dryer on HIGH setting will work as well.

10" Wire Cable Tie

Large magnet (not pictured)

External Fixed-Tip Retaining Ring Pliers, http://www.saeproducts.com/retaining-ring-tool.html

Tweezers

Needle Nose Pliers

Super Glue (not pictured)

apart_2_disassemble_pc_cooling_fan_clip_

apart_3_disassemble_pc_cooling_fan_clip_

External Fixed-Tip Retaining Ring Pliers, http://www.saeproducts.com/retaining-ring-tool.html

apart_4_disassemble_pc_cooling_fan_clip_

The fan blade looks as if it would snap-on and off, but not the case.

apart_5_disassemble_pc_cooling_fan_clip_

We need to remove the back label to access the external metal c-clip on the fan shaft.

apart_6_disassemble_pc_cooling_fan_clip_

Swipe heat gun or hair dryer back and forth over the label.

apart_7_disassemble_pc_cooling_fan_clip_

Use the Tweezer to peel off the fan label.

apart_8_disassemble_pc_cooling_fan_clip_

Stick the fan label on a clean metal surface while you perform your work.

apart_9_disassemble_pc_cooling_fan_clip_

You will tie down the fan hub with this Twisty tie. The fan shaft has a retention spring inside. You need to compress this spring, so you can remove the metal c-clip. If you don't, it's almost a guarantee that the c-clip will fly off the shaft faster than a bullet.

apart_9a_disassemble_pc_cooling_fan_clip

Using Twisty tie to compress the fan hub spring, by tying down the hub to the fan frame.

apart_9b_disassemble_pc_cooling_fan_clip

apart_9c_disassemble_pc_cooling_fan_clip

Close ups of the Black metal c-clip inside the Scythe Gentle Typhoon.

apart_9d_disassemble_pc_cooling_fan_clip

apart_9e_disassemble_pc_cooling_fan_clip

Insert the two prongs of the Retaining Ring Plier inside the jaw of the c-clip.

apart_9f_disassemble_pc_cooling_fan_clip

If you have a large Magnet, Position it near the fan hub, just in case the c-clip pops off.

apart_9g_disassemble_pc_cooling_fan_clip

apart_9h_disassemble_pc_cooling_fan_clip

Holding the black metal c-clip in the Retaining Ring Plier.

apart_9i_disassemble_pc_cooling_fan_clip

You will widen the jaw of the c-clip and need to bend it back to it's original opening, so it maintains it's grip.

apart_9j_disassemble_pc_cooling_fan_clip

Hold the c-clip in the Tweezer while using a Needle Nose Plier to compress jaw of the c-clip.

apart_9k_disassemble_pc_cooling_fan_clip

Doing this will allow you to re-use the metal c-clip.

apart_9l_disassemble_pc_cooling_fan_clip

Here is the Scythe Gentle Typhoon 120mm Cooling fan dismantled, next step is choosing whether to apply the GULF Blue or Orange, or both colors?

  • Upvote 1

Share this post


Link to post
Share on other sites
ST.o.CH    19

Nice tribute to Porsche 917 Le Mans.

 

Looking forward for more pictures.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now