2 the power^suply dous not work in sm stacker

[justice 0]

i have p5gd1 asus

X800XT PE

1024 ram ddr

4x sata 200 GB

3 x IDE 200 GB

2 x ide 80 GB

1 x ide 160 GB

i have cross flow and 3 x [3 to 4 modules]

meaning all the original coolers

[ 120 mm back 80 mm top 3x 12000 front and the cross flow fan ]

main power suply : LC Power 550 W

2the Power suply : ATX 250 GT [ P4] = also 250 W

i tryed looking for a manual on instaling it but no luck

when i start my pc => all the stuff connected on the 2the power suply wont start

[XFalloutX 0]

Did you hook the second power supply to where the first one is and see if it turns on the system?

[justice 0]

the power suply comes from another computer thad worked

[Wacft 0]

while we are on the subject of dual psu's can someone explain how this works? i thought for psu's to work there had to be a load on the atx power cable.

[justice 0]

Hold on io try to boot with the other powersuply

[Guest Mindless Moron]

while we are on the subject of dual psu's can someone explain how this works? i thought for psu's to work there had to be a load on the atx power cable.

u use a dongle which has an earth wire and a wire for motherboard detection and hey presto.

[Wacft 0]

ah, thanks.

[simplyadvanced 0]

while we are on the subject of dual psu's can someone explain how this works? i thought for psu's to work there had to be a load on the atx power cable.

u use a dongle which has an earth wire and a wire for motherboard detection and hey presto.

wire for mobo detection = green wire next to the clip

[Guest Mindless Moron]

dont forget the earth wire next to it