jacob  russon

THE MODGET

Recommended Posts

my goal is to do best i can with what i heve wich is a modest tower a dremel and skill with building things

first i will say how i came up with the name it is very simple it is a MOD but on a budget so i put tham togther to make MODGET

 

ok now on to plans

give my gray PSU a nice paint job

custum cable sleeving (not that cheap so it might not be done)

RGB led lighting with a homemade controller out of arduino, Propeller, or a picaxe

make a backplat for my GPU (what 750Ti dose not need a backplat :D)

give it a good dusting

and much more

 

 

post-97308-0-48389000-1423295896_thumb.jpg

post-97308-0-02666300-1423294650_thumb.jpg

my case a CM storm scout (original)

 

post-97308-0-62704900-1423294591_thumb.jpg

my GPU a EVGA 750Ti FTW

 

post-97308-0-78403100-1423294611_thumb.jpg

my storage a 120GB ssd and 2 WD blacks in raid1

 

 

post-97308-0-81724200-1423294695_thumb.jpg

my CPU AMD phenom ii X4 955

my motherboard a ASUS M4A88TD-V EVO/USB3

my cooler corsair h60

 

post-97308-0-83011300-1423294530_thumb.jpg

my RAM 12GB (2x2GB) and (2x4GB) hyperX blu

 

post-97308-0-87536600-1423295534_thumb.jpg

my PSU a 550W antec bp550 plus

Share this post


Link to post
Share on other sites

now to make my PSU look good

 

a PSU thats not that good looking

post-97308-0-39158200-1430460335_thumb.jpg

 

whats this a sicker that says warranty void if removed what!!!! now i cant do this :angry:

post-97308-0-97623500-1430460429_thumb.jpg

 

just kiding it was gone before this anyway :P

just look at then insides

post-97308-0-45564000-1430460624_thumb.jpg

 

after a coat of black pant on the PSU

post-97308-0-51172500-1430460878_thumb.jpg

Share this post


Link to post
Share on other sites

now to take the case apart but i seem to have missplaed the photos of that

 

 

painting the IO shield

post-97308-0-47758300-1430461369_thumb.jpg

post-97308-0-53858900-1430461484_thumb.jpg

post-97308-0-50460700-1430461501_thumb.jpg

 

painting the side panel and testing out the paint

post-97308-0-53672400-1430461329_thumb.jpg

 

 

painting the other side panel

 

after being masked and before paint

post-97308-0-27212800-1430461710_thumb.jpg

 

after the first paint

post-97308-0-54164500-1430461967_thumb.jpg

 

Share this post


Link to post
Share on other sites

now to make the RGB lighting

 

makeing the led strip at the bottom of the case

post-97308-0-44631600-1430462188_thumb.jpg

post-97308-0-58572800-1430462207_thumb.jpg

 

 

makeing the controller

post-97308-0-60673400-1430462367_thumb.jpg

post-97308-0-12166000-1430462388_thumb.jpg

 

and the back plate for the GPU (i thout i had more of this too)

post-97308-0-23283700-1430462560_thumb.jpg

Share this post


Link to post
Share on other sites

now for the cable channel

 

i started out makeing a paper plan

post-97308-0-58944900-1430462986_thumb.jpg

 

now i have it on a peice of metel

post-97308-0-51308700-1430463007_thumb.jpg

 

after cuting it with my dremel i then bened them

post-97308-0-24727400-1430463031_thumb.jpg

 

and it is done for the molst part

post-97308-0-55975300-1430463243_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.