Recommended Posts

AntSter    0

So, time to end the contest less and less.

 

Today I'll show you one of the hallmarks of my modding project. How did Ken Block in the car, I use in my scratch build a real carbon fiber! Not film, not laminitsiyu, present 2mm thick carbon fiber! The plans were engraved, but as long as it will not be.

0_180055_87b564ab_XXXL.jpg

0_18004a_425e059e_XXXL.jpg

0_180048_da28f6fb_XXXL.jpg

0_180049_173a62b9_XXXL.jpg

0_18004b_d32c8622_XXXL.jpg

 

Also, I came to the details carved into the laser alloy of magnesium and aluminum (AMg5) with a thickness of 2.5 mm

 

Front panel with holder

0_180057_4454e3d1_XXXL.jpg

 

Bottom

0_180058_5bf1c2b1_XXXL.jpg

 

Back panel

0_18004c_c8bac777_XXXL.jpg

 

Top panels. On one of them will stay watercooling radiator

0_18004d_12425613_XXXL.jpg

 

The average wall and holders for HDD and SSD

0_18004e_e4d53846_XXXL.jpg

 

"Gills" and carved brackets

0_18004f_1701dd49_XXXL.jpg

 

This item will be a support for the handle housing. It is made of duralumin on CNC machines

0_180056_42d97a3e_XXXL.jpg

 

The project will be used ISO 7380 M3 bolts of stainless steel and high-strength varying lengths

0_180051_a666b7d7_XXXL.jpg

0_180052_8575020b_XXXL.jpg

0_180050_bfa67c84_XXXL.jpg

 

And it's not sand - is powder paint for the frame. Color chose the catalog closest to the color wheel on the [HOONICORN]

0_180053_fb45d421_XXXL.jpg

 

If you think that the real carbon and fog machine - the most interesting things in this project - you are wrong - the most interesting thing to come!

Ready to Rock!

Share this post


Link to post
Share on other sites
AntSter    0

Top panels and radiator are mounted on spacers. I made them by hand from L-shaped aluminum corner. Now I want to tell you how to make a strong thread in aluminum, using special threaded rivets. How does this rivet can be seen in the previous report. She is standing on a sheet of carbon

 

I do holder.

0_180e71_83b7859c_XXXL.jpg

I increase the hole to 5.2 mm (M3 thread)

0_180e72_e9e07d5_XXXL.jpg

I reams shallow drill holes 8mm shallow

0_180e73_d8eede93_XXXL.jpg

Try on. This is not the best hole in the frame to get a lot better

0_180e75_22581bbb_XXXL.jpg

Need a special Riveter

0_180e77_af443e3e_XXXL.jpg

Spun rivet

0_180e79_73efe590_XXXL.jpg

Puts in place

0_180e7a_ad8c0938_XXXL.jpg

Pull and outcome.

0_180e7b_79bffc55_XXXL.jpg

0_180e7c_79be94ba_XXXL.jpg

 

Also from the L-shaped corner I was made brackets for doing the motherboard tray. The two of them grew stronger conventional rivets to the rear panel.

0_180e7d_3d83d48c_XXXL.jpg

There are all top brackets

0_180e7e_6e816eba_XXXL.jpg

And for mb tray

0_180e7f_42ceebd4_XXXL.jpg

Fold the holders HDD and SSD, and gills

0_180e80_d744da0d_XXXL.jpg

0_180e81_10b933bc_XXXL.jpg

The frame is ready. Bottom to attach to it using bolts and rivets.

0_180e82_5efba97b_XXXL.jpg

0_180e83_d32d8866_XXXL.jpg

0_180e84_b104409c_XXXL.jpg

0_180e85_b84fcfa1_XXXL.jpg

0_180e87_9266f2ac_XXXL.jpg

0_180e88_969fc526_XXXL.jpg

Share this post


Link to post
Share on other sites
AntSter    0

As I promised, interesting things of my project:

 

1) Headlight. Yes, yes, inside mITX case. Not from the Mustang, but also the classic car! These lights are put on the VAZ 2121 Niva, Vaz 2001. Lights of the same size (170mm diameter) is also set to MB Gelendwagen, VW Golf 2 and other cars, including the Mustang.

0_181bc8_74846ff0_XXXL.jpg

0_181bc7_af5bc91c_XXXL.jpg

0_181bc6_c7f7d571_XXXL.jpg

 

 

VAZ 2121 NIVA

0_181bc5_d8c22487_XXXL.jpg

0_181bc4_debeca0_orig.jpg

 

The cartridge and the LED for illumination

0_181bc9_5527388a_XXXL.jpg

 

2)Carrying handle made of solid duralumin. I wanted to do it in the style of the control knob on the handbrake drift - cars. 

Not by car of Ken, but as Vaughn Gittin Jr.'s Mustang RTR 2015 Spec 5.

http://www.speedhunters.com/2014/11/2015-ford-mustang-rtr-spec-5/

0_181bcd_775f3637_XXXL.jpg

0_181bcc_a0f14593_XXXL.jpg

0_181bcb_36515a8b_XXXL.jpg

0_181bca_39f23d77_XXXL.jpg

 

 

Source of inspiration

0_181bd5_f7795326_XXXL.jpg

0_181bd4_c742c64d_XXXL.jpg

 

The handle holder will be in the form of a spring, then with the handle it will look like suspension push-rod.

0_181bcf_477a4110_XXXL.jpg

0_181bce_99355662_XXXL.jpg

 

Stickers

0_181bd3_dc15bad6_XXXL.jpg

 

Carbon sheet cut into CNC MILLING of the desired size.

0_181bd1_1365a35b_XXXL.jpg

0_181bd0_25f89d0b_XXXL.jpg

 

The other side, it is clear that this is a real carbon

0_181bd2_7d9f772_XXXL.jpg

Share this post


Link to post
Share on other sites
AntSter    0

Sleeving

0_181e8b_a1b28147_XXXL.jpg

Frame

0_181e5f_e0d673c5_XXXL.jpg

0_181e60_db9ed94c_XXXL.jpg

0_181e61_b3aa373c_XXXL.jpg

Deepcool fan filter 120

0_181e62_dbabe93a_XXXL.jpg

Brackets

0_181e63_e1724e83_XXXL.jpg

0_181e64_4fa85ca8_XXXL.jpg

SSD and radiator

0_181e66_769e16b6_XXXL.jpg

0_181e67_a7557cca_XXXL.jpg

Back wall

0_181e68_f2b5d10f_XXXL.jpg

0_181e69_45ee3bd8_XXXL.jpg

v750

0_181e6a_6ccd4de3_XXXL.jpg

0_181e6b_f76d1049_XXXL.jpg

Parts of fog machine

0_181e6c_ee40c9f9_XXXL.jpg

Heater

0_181e6d_455cea80_XXXL.jpg

0_181e6e_49d96cac_XXXL.jpg

0_181e6f_598d7ef0_XXXL.jpg

Mid wall

0_181e70_1614b56a_XXXL.jpg

0_181e71_d9184b4_XXXL.jpg

Motherboard stand

0_181e72_e3ba46bc_XXXL.jpg

0_181e73_ae52d4ff_XXXL.jpg

0_181e74_facfd048_XXXL.jpg

Сonnectors of the smoke machine

0_181e75_54c26dcf_XXXL.jpg

0_181e76_aa6678de_XXXL.jpg

0_181e77_4486626c_XXXL.jpg

0_181e78_eca4f667_XXXL.jpg

0_181e79_2a7163f_XXXL.jpg

0_181e7a_27397d7_XXXL.jpg

0_181e7b_242801b7_XXXL.jpg

0_181e7c_6e672303_XXXL.jpg

0_181e7d_c3f9749c_XXXL.jpg

0_181e7e_1b1d406d_XXXL.jpg

0_181e7f_2416d993_XXXL.jpg

0_181e80_12f20f56_XXXL.jpg

0_181e81_c585c3ba_XXXL.jpg

0_181e82_734b3db7_XXXL.jpg

0_181e83_e15fbc85_XXXL.jpg

0_181e84_66579f7a_XXXL.jpg

0_181e85_f6d8b034_XXXL.jpg

0_181e86_311c5d2b_XXXL.jpg

0_181e87_92e57139_XXXL.jpg

0_181e88_50cd75a4_XXXL.jpg

0_181e89_bee097f0_XXXL.jpg

0_181e8a_c6585adf_XXXL.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.