seinron

COSMOS II MARK II By Seinron

Recommended Posts

seinron    6

Hi guys welcome on my new thread. smileface.gif

 

 

239062LDLCmoddingTrophyseinron4.jpg

 

Hardware Specs:
Case: Cooler Master Cosmos II
MB: MSI Z97 GAMING 9 Series
CPU: 4790K
RAM: 8GB Gskill RIPJAWS1600MHz
GPU: MSI Geforce GTX 770  2GB
PSU: Cooler Master V1200
SSD: Samsung EVO 250GB
 
I'd like to thank Cooler Master and MSI for sponsoring this mod with a: MSI Z97 GAMING 9 series, MSI Geforce GTX 770, Cosmos II, a V1200 psu and a bunch of JetFlo white LED fans. Thank you very much for that!

 

Before modding test of the hardware :

 

697246LDLCmoddingTrophyseinron13.jpg

 

It doesn't look sexy now... but it's fully functional. :)

 

Work on the motherboard, I've used a 1.5mm thick Aluminium plate whith many Holes to made a mainboard Cover :

 

133780LDLCmoddingTrophyseinron5.jpg

340764Ldlcmoddingtrophy2014cachecartemre
905358Ldlcmoddingtrophy2014cachecartemre
758883Ldlcmoddingtrophy2014cachecartemre
758883Ldlcmoddingtrophy2014cachecartemre
669916Ldlcmoddingtrophy2014cachecartemre
609962Ldlcmoddingtrophy2014cachecartemre
524355Ldlcmoddingtrophy2014cachecartemre
182104Ldlcmoddingtrophy2014cachecartemre

 

 

All the holes are finished, time to remove the plastic film :

508453Moddingtrophy1.jpg

579525Moddingtrophy2.jpg

  • Upvote 1

Share this post


Link to post
Share on other sites
ELSknutson    0

What are you using to cut your acrylic? 

I am doing a Humvee Build and I ordered an Asus Maximus Impact that I want to do the same Mod that you did to it. also what are you using to keep the sheet off of the board?

Share this post


Link to post
Share on other sites
seinron    6

 

Wow! 

 

that looks great, but 1 question,

what did u have for between motherboard, and the alu plate ?

and wouldnt it be a risk because of the heat ?

 

Thank you there are some brace under the alu plate. Absolutely no problem whith the heat :)

 

What are you using to cut your acrylic? 

I am doing a Humvee Build and I ordered an Asus Maximus Impact that I want to do the same Mod that you did to it. also what are you using to keep the sheet off of the board?

I use an hegner multicut 1 to cut acrilyc / alu / steel  :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.