Sign in to follow this  
Dave2010

[Tower Mod] CM Cosmos II MODERN by Dave2010 [COMPLETED]

Recommended Posts

Dave2010    0

Supports pumps

If you remember Laing DCC will use two 1Tplus, which have only two brackets for mounting. These two brackets, 2 mm thick each, will be fixed at the pumps with two fins, while the other two serve as attachment to the case. The media has been drilled to breathe all the pumps, which will be located behind a 40 mm fan, like the ones I used in the 600T for passive radiators. The support will be decoupled from its backplate with rubber bands on the screws, and the pump instead with sound-absorbing foam perforated to let air pass through and not transmit the vibrations.

29719d1372451751t-cm-cosmos-ii-modern-dscn7342.jpg

Water tanks

Yes, this time trays custom made. 600T are perfect as those of the estate, have not lost half a drop, work fine, so winning choice is repeated.

This time I changed the shape of the supports that both the glass ... you'll see later.

Thickness 3 mm to avoid placing your chopsticks 4, in the draw, stainless steel embarks if too thin. The part below was prepared with 4 holes in order to have a better chance of securing tubing.

Hole in the above instead, in order to allow refilling of the same.

29718d1372451761t-cm-cosmos-ii-modern-dscn7343.jpg

Front panel inside

1.5 mm thick, the hole in the lower part to place a 120 mm fan, adapted to develop the air flow of the project.

The upper part instead, with two bent fins, will serve as support for Aquaero 5 XT and poweradjust with a special mask Aquacomputer and probably for a DVD player if I decide to put it.

29717d1372451771t-cm-cosmos-ii-modern-dscn7344.jpg

29716d1372451782t-cm-cosmos-ii-modern-dscn7345.jpg

29715d1372451792t-cm-cosmos-ii-modern-dscn7346.jpg

Support the motherboard.

1.5 mm thick, will serve as support for the motherboard, rotated 90 ° with respect to the traditional positions.

It was a solution already foreseen at the time of the 600T but not implemented due to space constraints and incompatibility with the rest of the design which was already too advanced to be turned upside down.

In the lower part I opened a gap to pass the air through the vents of the door.

The holes are already all been predisposed to be tapped and used the legs raised bundled with the case, and then staring at the card.

The upper part was open only to remove steel and unnecessary weight to the panel. Side of the card will be ... well I will not tell now.

29714d1372451802t-cm-cosmos-ii-modern-dscn7355.jpg

29713d1372451812t-cm-cosmos-ii-modern-dscn7356.jpg

29712d1372451822t-cm-cosmos-ii-modern-dscn7357.jpg

29711d1372451834t-cm-cosmos-ii-modern-dscn7358.jpg

Share this post


Link to post
Share on other sites
Dave2010    0

Here, however, there is something interesting, a beautiful Venetian glass not to betray my roots for half the Veneto region.

The glassware is the same as that produced me glasses for 600T, but this time in shades of cobalt blue and gray, which are the two colors that predominate the mod, coupled to the sleeve.

You may wonder what to serve ... if I told you the water tanks? Before I mentioned in a different form ... so, water tanks square! You will then see how I plan to assemble them to ensure a perfect seal to the whole.

29720d1372452590t-cm-cosmos-ii-modern-dscn7347.jpg

29723d1372452620t-cm-cosmos-ii-modern-dscn7350.jpg

29721d1372452600t-cm-cosmos-ii-modern-dscn7348.jpg

29722d1372452610t-cm-cosmos-ii-modern-dscn7349.jpg

29727d1372452662t-cm-cosmos-ii-modern-dscn7354.jpg

29724d1372452632t-cm-cosmos-ii-modern-dscn7351.jpg

29725d1372452642t-cm-cosmos-ii-modern-dscn7352.jpg

29726d1372452652t-cm-cosmos-ii-modern-dscn7353.jpg

See you soon guys!

Share this post


Link to post
Share on other sites
Dave2010    0

First day of processing.

I started with the carving and thoroughly screwed all the cuts in the back, to begin placing the two rear panels, the inner and outer worlds.

This is followed by a dress rehearsal for their proportions, which obviously gave more than positive. The next steps will be to secure all the various panels and brackets then move on to the part of the design of the liquid cooling system.

29781d1372619529t-cm-cosmos-ii-modern-dscn7367.jpg

29782d1372619541t-cm-cosmos-ii-modern-dscn7370.jpg

29783d1372619547t-cm-cosmos-ii-modern-dscn7371.jpg

29784d1372619557t-cm-cosmos-ii-modern-dscn7373.jpg

29785d1372619563t-cm-cosmos-ii-modern-dscn7375.jpg

29786d1372619575t-cm-cosmos-ii-modern-dscn7378.jpg

29787d1372619581t-cm-cosmos-ii-modern-dscn7379.jpg

29788d1372619593t-cm-cosmos-ii-modern-dscn7381.jpg

29789d1372619604t-cm-cosmos-ii-modern-dscn7382.jpg

29790d1372619617t-cm-cosmos-ii-modern-dscn7385.jpg

29791d1372619629t-cm-cosmos-ii-modern-dscn7388.jpg

29792d1372619636t-cm-cosmos-ii-modern-dscn7390.jpg

29793d1372619648t-cm-cosmos-ii-modern-dscn7392.jpg

29794d1372619654t-cm-cosmos-ii-modern-dscn7393.jpg

29795d1372619667t-cm-cosmos-ii-modern-dscn7394.jpg

Share this post


Link to post
Share on other sites
Dave2010    0

Here I am, these days I continued fixing the total number of small panels. Today we see the two rear panels, internal and external fixation with power supply, front panel assembly and support internal SSD.

Unfortunately I made ​​a small error of judgment and I had to shorten the filler panel inside: dremel, a pretty narrowed down to finish and so serene.

29948d1373053334t-cm-cosmos-ii-modern-img_1295.jpg

29949d1373053341t-cm-cosmos-ii-modern-img_1297.jpg

29950d1373053351t-cm-cosmos-ii-modern-img_1298.jpg

29951d1373053357t-cm-cosmos-ii-modern-img_1300.jpg

29952d1373053369t-cm-cosmos-ii-modern-img_1304.jpg

29953d1373053375t-cm-cosmos-ii-modern-img_1305.jpg

29954d1373053386t-cm-cosmos-ii-modern-img_1307.jpg

29955d1373053393t-cm-cosmos-ii-modern-img_1309.jpg

29956d1373053403t-cm-cosmos-ii-modern-img_1311.jpg

29957d1373053414t-cm-cosmos-ii-modern-img_1313.jpg

29958d1373053425t-cm-cosmos-ii-modern-img_1314.jpg

29959d1373053432t-cm-cosmos-ii-modern-img_1315.jpg

29960d1373053440t-cm-cosmos-ii-modern-img_1317.jpg

29961d1373053447t-cm-cosmos-ii-modern-img_1318.jpg

Here once fixed the power supply.

29962d1373053455t-cm-cosmos-ii-modern-img_1319.jpg

Share this post


Link to post
Share on other sites
Dave2010    0

29963d1373054470t-cm-cosmos-ii-modern-img_1320.jpg

29964d1373054478t-cm-cosmos-ii-modern-img_1322.jpg

I proceed with the front panel internal practicing the holes for fixing.

29965d1373054490t-cm-cosmos-ii-modern-img_1325.jpg

29966d1373054502t-cm-cosmos-ii-modern-img_1327.jpg

29967d1373054512t-cm-cosmos-ii-modern-img_1328.jpg

29968d1373054520t-cm-cosmos-ii-modern-img_1329.jpg

29969d1373054527t-cm-cosmos-ii-modern-img_1331.jpg

Here is the support for the SSD. Will be fixed exactly in the center of the front inner panel.

According to you, the better horizontally or vertically?

29970d1373054539t-cm-cosmos-ii-modern-img_1332.jpg

29971d1373054550t-cm-cosmos-ii-modern-img_1333.jpg

29972d1373054561t-cm-cosmos-ii-modern-img_1334.jpg

29973d1373054573t-cm-cosmos-ii-modern-img_1335.jpg

29974d1373054583t-cm-cosmos-ii-modern-img_1336.jpg

29975d1373054594t-cm-cosmos-ii-modern-img_1338.jpg

29976d1373054605t-cm-cosmos-ii-modern-img_1340.jpg

29977d1373054616t-cm-cosmos-ii-modern-img_1343.jpg

Share this post


Link to post
Share on other sites
Dave2010    0

Productive weekend.

I finally fixed all the panels to the structure of the case. Tomorrow I will go to Leroy Merlin to get a male M3 for threading holes in the panel for the motherboard.

Then I will set foot in various bundles that give classics and black M3 screws to secure the card. I will fix definitively Aquaero and company on the front and support SSD.

Following these easy steps, I can finally get an idea of all your internal rules and to study the best paths for the LCS pipes.

30003d1373201331t-cm-cosmos-ii-modern-img_1350.jpg

30004d1373201342t-cm-cosmos-ii-modern-img_1352.jpg

30005d1373201353t-cm-cosmos-ii-modern-img_1353.jpg

30006d1373201361t-cm-cosmos-ii-modern-img_1354.jpg

30007d1373201371t-cm-cosmos-ii-modern-img_1355.jpg

30008d1373201382t-cm-cosmos-ii-modern-img_1356.jpg

30009d1373201393t-cm-cosmos-ii-modern-img_1357.jpg

30010d1373201404t-cm-cosmos-ii-modern-img_1358.jpg

30011d1373201414t-cm-cosmos-ii-modern-img_1359.jpg

30012d1373201424t-cm-cosmos-ii-modern-img_1360.jpg

30013d1373201435t-cm-cosmos-ii-modern-img_1361.jpg

30014d1373201445t-cm-cosmos-ii-modern-img_1362.jpg

30015d1373201454t-cm-cosmos-ii-modern-img_1363.jpg

30016d1373201465t-cm-cosmos-ii-modern-img_1365.jpg

30017d1373201475t-cm-cosmos-ii-modern-img_1366.jpg

Share this post


Link to post
Share on other sites
Dave2010    0

Small jobs during the week.

I replaced the original heatsink of the Aquaero 5 XT with his waterblock made of copper and I completed the implantation of the three elements to the inner front bulkhead.

I plan to fix the support SSD and the two rear supports pumps with cooling fans for this weekend, so I'll almost completed all the different hardware. Be followed by the construction of the reservoirs, I'll have all the internal parts, defined and proceed with the study of paths rigid pipes of E22 and proceed accordingly to conclude the conversation with already established .... you will see it at the right time, but I think it'll be the first or maybe the second, in Italy, to get this sponsorship.

Meanwhile look at these photosssss!

30201d1374005718t-cm-cosmos-ii-modern-dscn7395.jpg

30202d1374005736t-cm-cosmos-ii-modern-dscn7396.jpg

30203d1374005754t-cm-cosmos-ii-modern-dscn7397.jpg

30204d1374005771t-cm-cosmos-ii-modern-dscn7398.jpg

30205d1374005788t-cm-cosmos-ii-modern-dscn7399.jpg

30206d1374005805t-cm-cosmos-ii-modern-dscn7400.jpg

30207d1374005822t-cm-cosmos-ii-modern-dscn7401.jpg

30208d1374005841t-cm-cosmos-ii-modern-img_1428.jpg

Share this post


Link to post
Share on other sites
Dave2010    0

Here I am.

In this little up, I'll show you the mounting of the SSD's inox support.

I realize a little cover for the front panel, where there are the screws that fix the Aquaero and the other two controllers.

30550d1375167251t-cm-cosmos-ii-modern-dscn7403.jpg

30549d1375167260t-cm-cosmos-ii-modern-dscn7404.jpg

30552d1375167269t-cm-cosmos-ii-modern-dscn7406.jpg

30548d1375167278t-cm-cosmos-ii-modern-dscn7408.jpg

30547d1375167287t-cm-cosmos-ii-modern-dscn7409.jpg

30546d1375167295t-cm-cosmos-ii-modern-dscn7411.jpg

30545d1375167305t-cm-cosmos-ii-modern-dscn7412.jpg

30544d1375167314t-cm-cosmos-ii-modern-dscn7414.jpg

30543d1375167323t-cm-cosmos-ii-modern-dscn7415.jpg

30542d1375167333t-cm-cosmos-ii-modern-dscn7416.jpg

30541d1375167342t-cm-cosmos-ii-modern-dscn7417.jpg

30540d1375167352t-cm-cosmos-ii-modern-dscn7419.jpg

30539d1375167357t-cm-cosmos-ii-modern-dscn7420.jpg

30538d1375167367t-cm-cosmos-ii-modern-dscn7421.jpg

30551d1375167242t-cm-cosmos-ii-modern-dscn7423.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this