Sign in to follow this  
pcjunkie209

HellRaiser

Recommended Posts

pcjunkie209    0

Hello everybody! so I started this mod a few weeks ago but have been busy so haven't got any pics uploaded yet. The case will be the Cooler Master CSX Stacker :) Raiser edition painted by Smooth Creations. I will be doing some mods to the inside of the case to house a 480 rad and a 240 rad. I will also be doing a few other things that I'll show later. So far the parts are as follows:

CM Stacker

Asus Maximus V Formula

Asus AMD Radeon 7970

Intel i7 3770K

Adata SP900 128gb SSD's in Raid 0

Adata XPG 2133mhz 32gb

Cooler Master Hybrid 1300watt

Lepa 120mm Chopper fans

E22 Res and fittings

And a bunch of EK stuff

Some sponsors were kind enough to join in:

dbtgallery.php?do=gallery_image&id=1349&gal=privgallery&type=fulldbtgallery.php?do=gallery_image&id=1355&gal=privgallery&type=fulldbtgallery.php?do=gallery_image&id=1345&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1347&gal=privgallery&type=fulldbtgallery.php?do=gallery_image&id=1352&gal=privgallery&type=full

not using the Avexir ram after all. :(

dbtgallery.php?do=gallery_image&id=1263&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1281&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1282&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1283&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1293&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1329&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1330&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1333&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1332&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1331&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1287&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1286&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1258&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1255&gal=privgallery&type=full

Thats it for now I'll post some pics morrow....

Share this post


Link to post
Share on other sites
pcjunkie209    0

Ok so how about some more pics! :) First on the agenda was the floor. Need to make room for 480mm rad....

dbtgallery.php?do=gallery_image&id=1244&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1245&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1247&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1248&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1249&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1250&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1251&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1252&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1253&gal=privgallery&type=full

More to come since this pc is almost done. Just didn't have time to post pics. So bare with all the pics and quick updates. :)

Share this post


Link to post
Share on other sites
pcjunkie209    0

Ok so some over due pics coming your way!! EK was kind enough to send some stuff for this build here's some pics....

dbtgallery.php?do=gallery_image&id=1339&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1284&gal=privgallery&type=full

LOL

dbtgallery.php?do=gallery_image&id=1313&gal=privgallery&type=full

Board before blocks

dbtgallery.php?do=gallery_image&id=1277&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1278&gal=privgallery&type=full

Motherboard blocks installed

dbtgallery.php?do=gallery_image&id=1279&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1280&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1292&gal=privgallery&type=full

On with some of the modding. Here's a couple pics of some of the mods I did to add better cable management since this case was seriously lacking in that department. First off I finished up the front piece and re-did the fan shroud for the floor.

dbtgallery.php?do=gallery_image&id=1336&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1328&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1325&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1326&gal=privgallery&type=full

And I added a little notch here on the shroud for the slide in mobo tray. U can also see where I marked the mobo tray for cutting.

dbtgallery.php?do=gallery_image&id=1327&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1337&gal=privgallery&type=full

Here I'm adding a cover for the 5.25 bays. You'll see more in later pics.

dbtgallery.php?do=gallery_image&id=1322&gal=privgallery&type=full

This shows a little of the reason why. I cut away all the bay mounts on the front side.

dbtgallery.php?do=gallery_image&id=1285&gal=privgallery&type=full

Here I am gonna add a plate to hold the E22 res and also use for routing wires.

dbtgallery.php?do=gallery_image&id=1309&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1308&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1310&gal=privgallery&type=full

Tapped some holes to hold the res bracket.

dbtgallery.php?do=gallery_image&id=1311&gal=privgallery&type=full

better look at the plate for the 5.25. Still needs a few holes.

dbtgallery.php?do=gallery_image&id=1312&gal=privgallery&type=full

Wire management holes on back of the 5.25 since there is no room behind mobo or anywhere else.

dbtgallery.php?do=gallery_image&id=1317&gal=privgallery&type=full

Just for kicks I added a 5.25 on the mobo tray for my CM Hybrid controller.

dbtgallery.php?do=gallery_image&id=1295&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1294&gal=privgallery&type=full

dbtgallery.php?do=gallery_image&id=1321&gal=privgallery&type=full

Last but not least all the parts ready for powder coating. Also in this pic u may get an idea what will be on that plate that covers all the holes on the 5.25 bays. :)

dbtgallery.php?do=gallery_image&id=1296&gal=privgallery&type=full

Thanks for looking. I'll be back soon with more. Until then.....

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this