Sign in to follow this  
Meelobee

[Scratch Build] | ZdMods | Project p�ʇɹ�ʌuı

Recommended Posts

Meelobee    1

Thanks Mark :)

banner_update.jpg

Made a fancontroller in the right panel, just above the 7" touchscreen:

picture.php?albumid=1836&pictureid=28310

picture.php?albumid=1836&pictureid=28311

picture.php?albumid=1836&pictureid=28312

picture.php?albumid=1836&pictureid=28313

picture.php?albumid=1836&pictureid=28314

picture.php?albumid=1836&pictureid=28315

picture.php?albumid=1836&pictureid=28316

picture.php?albumid=1836&pictureid=28317

I've also prepared the psu cover, a backpanel and a sidepanel for priming:

picture.php?albumid=1836&pictureid=28318

picture.php?albumid=1836&pictureid=28319

picture.php?albumid=1836&pictureid=28320

And I've prepared a couple of parts for the 2nd layer of paint:

picture.php?albumid=1836&pictureid=28321

picture.php?albumid=1836&pictureid=28322

Not a real big an update, all this stuff is very time consuming.... till next time! :)

Share this post


Link to post
Share on other sites
Meelobee    1

Thanks Shiryu_libra & Frozensnail :)

banner_update.jpg

Painted the main parts of the frame:

picture.php?albumid=1836&pictureid=28685

picture.php?albumid=1836&pictureid=28686

picture.php?albumid=1836&pictureid=28687

And started to rebuild the case with the painted parts (phone pics, sorry)

530162_387093611345592_1091644909_n.jpg

Wired up the main powerconnector & On/Off switch. The blue cable is for the 7" touchscreen.

391397_387094508012169_418738612_n.jpg

Front bar = shiny!

600074_387094221345531_820810911_n.jpg

409667_387461677975452_1689726054_n.jpg

:cheers:

Share this post


Link to post
Share on other sites
Meelobee    1

banner_update.jpg

I've almost finished the left sidepanel. Tonight I've installed the rads, the touchscreen and the fancontroller:

picture.php?albumid=1836&pictureid=28752

picture.php?albumid=1836&pictureid=28753

picture.php?albumid=1836&pictureid=28754

picture.php?albumid=1836&pictureid=28755

picture.php?albumid=1836&pictureid=28756

picture.php?albumid=1836&pictureid=28757

picture.php?albumid=1836&pictureid=28758

picture.php?albumid=1836&pictureid=28759

picture.php?albumid=1836&pictureid=28760

picture.php?albumid=1836&pictureid=28761

picture.php?albumid=1836&pictureid=28762

picture.php?albumid=1836&pictureid=28763

The print with the on/off switch for the screen is on the left side of the bottom frame:

picture.php?albumid=1836&pictureid=28764

picture.php?albumid=1836&pictureid=28765

Domenut as temporary button (any ideas what to replace it with?)

picture.php?albumid=1836&pictureid=28766

Share this post


Link to post
Share on other sites
Meelobee    1

Not a single comment/reply? :?

banner_update.jpg

I've installed all the plexistrips to the frame (which also was painted) and I've installed the front and back side of the case:

picture.php?albumid=1836&pictureid=28805

picture.php?albumid=1836&pictureid=28806

picture.php?albumid=1836&pictureid=28807

picture.php?albumid=1836&pictureid=28808

picture.php?albumid=1836&pictureid=28809

picture.php?albumid=1836&pictureid=28810

picture.php?albumid=1836&pictureid=28811

picture.php?albumid=1836&pictureid=28812

Share this post


Link to post
Share on other sites
Ch2pa    0
Not a single comment/reply? :?

I think most of the people here just publish their worklog and don't take time to watch and comment other's.

If they miss your worklog it's a shame: your work is very clean and your mod brings a lot of innovations! Keep up the modding level :wink:

Share this post


Link to post
Share on other sites
Meelobee    1

Ch2pa: Yeah I guess so... ok back to showing off then :D

Fifas: Thanks :)

picture.php?albumid=1836&pictureid=29515

picture.php?albumid=1836&pictureid=29516

Did most of the sleeving in the case:

Pump:

217952_388969654491321_1851389734_n.jpg

Powersupply:

409637_388968964491390_1900570920_n.jpg

Powerbutton:

380476_390353601019593_402180038_n.jpg

The half stripped case

picture.php?albumid=1836&pictureid=29504

Almost done sleeving the psu wires with Paracord, unfortunately I ran out of white Paracord so there's still 3 wires left to do.

picture.php?albumid=1836&pictureid=29505

picture.php?albumid=1836&pictureid=29506

Finally decided how to wire the gpu. So I've prepared for the wires of the gpu by making another hole in the panel that holds the mobo. (And I ordered another lasercut panel, just like the ATX panel. But this one is smaller and has 13 holes.)

picture.php?albumid=1836&pictureid=29507

picture.php?albumid=1836&pictureid=29508

Early version of the gpu bracket, it's quite big and bulky, but it will be smaller/sleeker when it's done.

picture.php?albumid=1836&pictureid=29509

picture.php?albumid=1836&pictureid=29510

And last but not least, a simple but effective bracket for 2 SSD disks.

The second disk fits in between the 2 alu pieces underneath the other disk.

picture.php?albumid=1836&pictureid=29511

And I've installed the ledstrips in the top of the case:

582621_390658840989069_1501731951_n.jpg

I also have a small movie of the RGB leds in action, here is the link to the clip I made: http://youtu.be/e3CcBQAFuEw

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this