Sign in to follow this  
HULK

THE INCREDIBLE HULK

Recommended Posts

HULK    0

I will be starting with my video card casing. The video card casing will be modded from the ground up. I think I will be the first who ever thought of case modding the video cards. If anybody knows of anybody else please let me know. I will be modding three video card casings, I will utilizing three way SLI.

post-89889-13880424355785_thumb.jpg

post-89889-13880424356229_thumb.jpg

post-89889-13880424356717_thumb.jpg

post-89889-13880424359818_thumb.jpg

post-89889-13880424357121_thumb.jpg

post-89889-13880424357516_thumb.jpg

post-89889-13880424358016_thumb.jpg

post-89889-13880424358471_thumb.jpg

post-89889-13880424358825_thumb.jpg

post-89889-13880424359277_thumb.jpg

This is my home made heat strip for bending my fiber glass.

To be continued.....

Share this post


Link to post
Share on other sites
HULK    0

post-89889-13880424360179_thumb.jpg

post-89889-13880424360679_thumb.jpg

post-89889-13880424360974_thumb.jpg

post-89889-13880424361285_thumb.jpg

post-89889-13880424361785_thumb.jpg

post-89889-13880424362133_thumb.jpg

post-89889-13880424362517_thumb.jpg

post-89889-13880424363179_thumb.jpg

post-89889-13880424362804_thumb.jpg

post-89889-13880424363677_thumb.jpg

Now this is just one of the three I would have to mod.

The other two would be identical except the wording, one would have the word "THE"

and the other would have the word "INCREDIBLE"

To be continued.....

Share this post


Link to post
Share on other sites
HULK    0

post-89889-1388042436443_thumb.jpg

This is how the other two video cards will look like

post-89889-13880424364088_thumb.jpg

Now I'm going to build the base where the motherboard, Hard drives and SSD's will be placed.

The base will be suspended over the head of the HULK figurines, so there will be pictures

of the base showing one corner of the base open ended. So that a straight steel beam will be

place in that open to betray the HULK lifting the base.

post-89889-13880424364756_thumb.jpg

post-89889-13880424365075_thumb.jpg

post-89889-13880424365448_thumb.jpg

post-89889-13880424392868_thumb.jpg

post-89889-13880424393711_thumb.jpg

post-89889-13880424393311_thumb.jpg

post-89889-13880424394045_thumb.jpg

post-89889-13880424394458_thumb.jpg

This is the opening for the steel beam.

Share this post


Link to post
Share on other sites
HULK    0

Thank You for the comments.

Now I'm going to continue with the base of the case.

post-89889-13880424402461_thumb.jpg

This is the steel pole that will be used to hold the base above the hulks head.

post-89889-13880424403214_thumb.jpg

post-89889-13880424404034_thumb.jpg

post-89889-1388042440678_thumb.jpg

post-89889-13880424404747_thumb.jpg

post-89889-13880424405333_thumb.jpg

Now this is the stand offs for the motherboard.

post-89889-13880424406059_thumb.jpg

Half the base will have a lid that will be opened or closed.

The other half will be opened space where the video cards will be placed.

post-89889-13880424406483_thumb.jpg

post-89889-13880424407577_thumb.jpg

post-89889-13880424407244_thumb.jpg

Share this post


Link to post
Share on other sites
HULK    0

Now I will build one of the sides of the lid. It will have the holes for two 80mm fans.

post-89889-13880424474224_thumb.jpg

post-89889-13880424474528_thumb.jpg

post-89889-13880424474915_thumb.jpg

post-89889-13880424475289_thumb.jpg

This is the end face of the lid, where the clamping mechanism will be placed in order to keep lid attached to the base

post-89889-1388042447258_thumb.jpg

post-89889-13880424472886_thumb.jpg

post-89889-13880424473255_thumb.jpg

post-89889-13880424473553_thumb.jpg

post-89889-13880424473856_thumb.jpg

Share this post


Link to post
Share on other sites
HULK    0

Now the motherboard I will be using is the ASUS Rampage III Extreme.

post-89889-13880424529572_thumb.jpg

In the next few photos i'm going to use the power and reset buttons on the motherboard to

power on my case mod. So I'm going to build a cover to protect from touching any other components.

on the motherboard.

post-89889-13880424531199_thumb.jpg

post-89889-13880424530151_thumb.jpg

post-89889-13880424530716_thumb.jpg

post-89889-13880424531626_thumb.jpg

post-89889-13880424532068_thumb.jpg

post-89889-13880424532679_thumb.jpg

Now the case modded video cards will have to be positioned differently, because since they where

modded with a 1/4" thick fiberglass and i'm going tri-sli. They will not fit on the motherboard.

So I decided to place the cards above the motherboard, above the base lid and I will be using PCI

express extenders in order to accomplish this. In the next few photos I will be building the brackets

that will hold the cards.

post-89889-13880424533008_thumb.jpg

post-89889-13880424533343_thumb.jpg

post-89889-13880424533683_thumb.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this