Search the Community
Showing results for tags 'water cooling'.
Found 9 results
-
I bought two MF120 Halo case fans for side placement on my Raidmax Vampire case. Right now, I installed the bottom (sub GPU) as intake and top fan as exhaust. Not exactly sure about my reasoning with this, other than pull in cool air below and push out hot air above. However a Google search says they should both be intake. Thoughts? My CPU temps are higher than they were before, but I also installed a Carbonaut pad with my ML240R. Temps are up to 74C under load for the first time ever and I want to get that down. Minimum is 41C. Too many variables added all at once (new case fans, Carbonaut, new GPU). I want to get my temps down. ASUS Strix ROG B450-F Gaming Ryzen 2700 OC to 4.1 Sapphire Nitro+ 5700XT SE Also, Aura does not seem to drive the lighting as it should, have to use the CM software, but I do not like the effects as much as Aura. Thanks!
-
Hello, I just wanted to ask if it would be possible to build in a Corsair Hydro Series H100i RGB Platinum (240 mm Fans) in a Cooler Master MasterCase MC500 Case at the Top. I would use the Cooler Master MasterCase Series Cooling Bracket and the CoolerMaster MasterCase 5 Series Top Cover Kit too. Is it possible or are there problems that I overlook? Thanks in advance for your answers. kekstime
-
I recently purchased an ML240L RGB AiO liquid cooler. The pump itself works fine, the RGB lights up fine, and one fan works normally, but the other fan is vibrating. It seems to wobble very quickly (since the fan is spinning at hundreds of RPM, this wobble turns into a vibration). Is there anything I could do? Preferably I would do it myself at home, but if it's not possible to fix it yourself, I would have to send it back to Cooler Master.
-
So i ma looking to buy a coolermaster mastercase maker 5t for my custom loop and I would like to know if I can mount a 360 radiator at the front -
Hello, I purchased the Cosmos 25th Anniversary full-tower case and I have a few questions. Firstly, I see that I can put up to three 120mm case fans on the top, but the radiator support section of the manual says the max size is 320mm. How is this possible if I can combine three 120mm fans (3 * 120 = 360)? Secondly, what is the max size radiator that can be mounted in the front? Lastly, how do I remove the ODD cage and HDD cage to make more room in the front of the case for airflow? Thank you in advance for your time and help!
-
Hey guys, Here's one of my entries for this year, my Intel Skull scratch build Check out my full overview and time lapse video putting this build together here: SPECS: MB - GIGABYTE X299 AORUS MASTER CPU - Intel Core i9-9980XE RAM - 32GB Team Group Night Hawk RGB DDR4 3200MHz GPU - 2 x GIGABYTE GeForce RTX 2080 Ti GAMING OC M.2 SSD - 2 x 512GB AORUS RGB M.2 PCIe NVMe SSHD - 2 x 2TB Seagate Firecuda HDD - 2 x 6TB Seagate Barracuda PSU - Cooler Master V1200 Platinum Custom water cooling by EK Water Blocks Custom cables by CableMod
-
I want to use my laptop to program the cool master argb/fan controller and need to know If I plug the usb into my usb port on my laptop can I access the controller that way, also I would like to use my fluid temp to controle fan speed and need to know if I splice a liquid probe onto the case probe can it use the fluid temp instead of the case temp. I am cooling on a wet bench and do not have a mother board to use with a header rail. side note if I disconnect the usb cable will the controller still work or dose it require the computer. thermaltake 650 powersupplie thermaltake c360 kit alphacool apu block 1 set xspc msi z87 water block 1 Byrski dual channel waterblock thanks for all the help
-
Hello guys, How are you? I just need to know if the CM 590 III support Corsair Hydro Series H110i (CW-9060027-WW or CW-9060026-WW) Thank you so much
-
Would it be possible to mount a 120mm radiator/fan combo on the hdd side mount of the elite 130? I was hoping to use an R9 295x2 in the case, which would use up a 120mm cooling slot for its attached water cooling loop and leave the cpu without water cooling unless there is room for a second rad. Does anyone know if this is possible?
