Search the Community
Showing results for tags 'v8'.
Found 4 results
Hi , find solution to my issue for cooler master cpu cooler maker GTS V8 With the Cooler master master case 5 the cooler now is tite with the case panel so some times when we try to run the pc it crash and couldn’t start and after we open the side panel for the case it runs perfect. Over all im happy with cooler master products and I have a lot of your product in my last 2 buld the v850 psu, cooler master master case 5 Nvidia ,GTS V8 Cpu cooler ,Cooler master master Case 5 and geminii S524-v2 cpu cooler. And my issue is on build CPU Intel Core i7-7700K 4.2GHz Quad-Core Processor CPU Cooler Cooler Master V8 69.7 CFM Rifle Bearing CPU Cooler Motherboard ASRock Z170 Pro4S ATX LGA1151 Motherboard Memory Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory Storage Silicon Power Slim S55 240GB 2.5" Solid State Drive Video Card MSI GeForce GTX 960 4GB Video Card Case Cooler Master MasterCase 5 ATX Mid Tower Case (Whithe) Power Supply EVGA SuperNOVA NEX 750W 80+ Bronze Certified Semi-Modular ATX Power Supply OS Microsoft Windows 10 Pro OEM 64-bit And im looking ahead to make an solution for that without change my build I see some suggestions :- 1.make an custom window pups out an few mm. 2.change the motherboard stud's. Thank you Mohammed Almawlani
CM V8 GTS seems to have a dust issue. I wonder anyone has the same issue. I built my PC last march with V8 GTS. It has been less than two months clearly, and I use my PC less than an hour a day. I really like how it looks but today I found collected dust dropped from the fan. See the attached pictures. Dust has been collected on the right bottom of the steel part, and some large dust bunches dropped from it onto the VGA card. Some of them might fall into the VGA board through the holes. I am worried that dust might come from the grinded moving part of the fan. This seems to be an quite problem considering the time I have used it. Anyone has the same issue?
I have an older cooler master V8 that I just acquired (http://www.coolermaster.com/cooling/cpu-air-cooler/v8/), and it currently does not fit into my case.... Is there a list of cases that it will fit inside of? Can Cooler Master give me a list of suggested cases I could purchase?
Hey all, Currently I have a Gigabyte Z97-HD3 Motherboard and a coolermaster storm enforcer case, I would just like to know if a V8GTS cooler will fit in the case before I buy as there are returns within 7 days but if opened I only get 50% of its value back as a restock fee. Basically the reason I am asking this is just because I want to know if these factors will affect the fitting of the Cooler even though it says a V8GTS can fit in an enforcer case: *I have no fans at the top or side, only the rear fan and front 200mm fan. *The motherboards cpu and ram position as the ram 4 slots closest to the HDD bay and Optical disk drive slot (if that makes sense) -This is because the current builds I have seen with the V8GTS have 2 or 4 ram slots on both sides of the processor with the processor slot in the middle. *If the height of the case is enough for the motherboard and V8GTS cooler. *if the RAM I have will be in the way (G.Skill Ripjaws X 2x4GB) Sorry if this is a noob question, I am capable of putting together my own computer myself and have been building for years, but because of the size of this cooler I really do not want to stuff this up and have to fork out money for wasting the shops time. Note: the picture I have uploaded is a picture from when I was building the rig with nothing but the motherboard on it, this photo was used because you can see the exact placement/layout of everything instead of it being cluttered but the rest of the components Thank you.