AM4 Socket Support 04/24/2017Due to technical issues, the topic on "AM4 Socket Support" has disappeared. We apologize for any inconvenience this has caused and we are trying our best to have this topic back up as soon as possible. As we read in the topic, there is a lot of discussion going on when the new brackets will be arriving. We can tell you now that the brackets will be ready for pre-order on our CM Store EU tomorrow and will be ready for shipment around the 16th of May. You can continue the discussion in this newly created topic:
Search the Community
Showing results for tags 'scale model'.
Found 1 result
Hello, everybody, I am bjpc, (Bernd Joachim Puwalski, 41, called Jo) and want to invite you to my ITX- project "Maker Theater"! It is thankfully dedicated to the Masterliquid Maker 92, that was the base-stone for this project and has been sponsored by Cooler Master Germany. It will be a custom-welded frame case with a 1:87 scaled diorama on top. Due to the fact, the AMD based ITX build shall be used as a HTPC, the diorama will show a classic cinema scene- inviting to see movies like "Rebel without a case" or "The Modfather". The case itself, I will try to keep as compact, as possible, with a thin- frame- construction, that is closed only by acrylic panels in fluorescent blue. This log will be kept updated, from now, to display, how my vision of a "Maker Theater" will look like. Update 06.04.:.... after starting this work log in February, more than 60 % of the project are done now. I have prepared the rest, and all materials are waiting, to be used. So I can start this work log updated with the Front- View of the "Maker Theater"- be welcome there! bjpc Here pretty much of the parts and material so far is shown. The 1:87 scaled models, in my opinion, have just the right resolution to fit nicely to the hardware, for making the desired effect. UPDATE 18.02.2017 Now, with some further planning, I got, in addition to the theater kit, this skyscraper- building-site kit. In my imagination, it will frame the Masterliquid Maker, even better than having it housed by the cinema like I firstly started. The missing parts for the build now are there- steel in diameter 10x10 for the frame and 15x20x2 for mounting parts, as well as 20x2 for planning blindspots. I will weld with 1.6 mm rutile electrodes. To set highlights, I enlarged my Dremel Machine Fleet by the Engraver, that for sure will allow me, leaving my personal finish to the frame and other parts. Needless to say, that relying on Dremel for a mod or scratch build is the safest way to succeed in any changes or producing steps made, and no news, at all. The Powers, Reset- and Lighting- vandalism switches come with the small diameter of 16mm and just are perfect for my needs. Just sitting around.... But in the background, the acrylic, I plan to use for covering the case is to be seen: a blueish fluorescent panel, whose polished edges should glow nicely, when lighted from inside The Vallejo color sets are for airbrush as well as for paint- brush and will make a close-to-realistic appearance possible, away from "looking-like-plastic" only. With the fine-brush- set, I should have nice results, I hope. The aluminum case- feet, at last just will make a good look in the end. With the truck being the first modded part, there obviously is a thought of mine displayed... I am working on it- and attending to this year's Case Mod World Series really is something, I dream of. Anyway, I will just keep this build log up-to-date and we will see, what I can post next, here... With being officially registered to the Case Mod World Series 2017, I will start with this project in Scratch Category. Thank you, Cooler Master, for confirming it. Update March, 1st 2017: As the first very modding step, I changed the tubing of the Masterliquid Maker 92, and set the Ram to its watercoolers. Next step shall be using Leaf Silver, to set highlights I also started with assembling the Theater kit With receiving more and more hardware, now some specs come into focus as well. The system will be powered by this: The APU A10 7890K was provided by AMD- I am really glad, they decided, to support me here. And thankful. The APU will find place on an Asrock A-88M-ITX/ac board The hard discs- 2TB WD Black are sponsored by Western Digital- thank you, for giving me this chance. When it comes to peripheral water cooling, the parts all have been supplied by Alphacool International and Aquatuning- here for cooling HDD´s and RAM: For the proper preparation of the loop and the perfect look, Mayhems helped me with sending me Blitz Kits for preparation as well as Pastel liquid and Ultrapure Water, even when the to be used pastel black already was provided by Aquatuning. I think it will be a good combination, in the end- Thank you, to Alphacool, Aquatuning, and Mayhems at all! With the build from scratch is not complete of course, Cooler Master gave me these marvelous peripherals, on top- I really appreciate it, thank you so much! For now, that´s pretty much it- there will be the welding work coming up next, and detailing, of course. The Frame base with the angled arms was the start of the construction: With the base frame welded, a first test fit was possible Now some progress can be shown: the mainboard as well as the two WD Black HDD´s, set on an Alphacool PSU cooler, are carried by the frame, now. It soon is about to fine-sand and lack-off the frame and the body will be ready. A part of the acrylic side windows are semi-fitted, already, and the windowing of the case can be accomplished soon. Today, I added the mounting rails for the radiator, and set the PSU into the Theater, for convenient access 2nd of April: Today I finished the RAM- and HDD- loop from Alphacool- run by a DC- LT pump that is fed by an eloquent pump-top reservoir, two main tubes are set below the HDD- cooler. The loop has been prepared with the Mayhems Blitz Kit and is ready for be taken apart again, for the frame final- painting. The pictures show the inspection by the planning department, per usual The Masterliquid Maker 92 AIO CPU- cooler was up to be finished, after the leaf- silver application, I set some color highlights. Only a proper cable- management left to do, and the integration into the skyscraper- building- site around it. Loving details: Get your tickets for the premiere now- pre-sale has opened! Now, after adding the majority of the front details- here is an impression of a night shift at the Maker Theater: And here is the latest result- Ticket counter and visible interior like Concession finished, also lighting and weathering: With now having finished pretty much everything of the cinema building, it is time to start with the building site next to it...after the already finished crane, I assembled a concrete truck, and tried to give it a real look....