Search the Community
Showing results for tags 'overheating'.
Found 4 results
I bought a brand new ML120L (from Amazon) and installed as per the instructions. It does not seem to working properly. Looking for some troubleshooting help. The ML120L started up fine. All lights worked. Fan started, etc. From boot up, my CPU temp would climb steady, even at idle, to 105°C! with the ML120L installed. I have since reinstalled the stock heat sink, the CPU temps have now stabilized under 50°C. Same thermal paste used to install the ML120L, and then reinstalling the stock heat sink. Stock Heat Sink before = 50°C ML120L = 105°C! Stock Heat Sink reinstalled = 50°C System Info Intel i5-3750K @ 3.4 GHz (not overclocked, was planning too with installation of ML120L) Gigabyte GA-Z77X-D3H Mobo 16Gb Ram GTX760 2Gb Video card 750W gold Power Supply
The cooler has been working fine for almost three years. It stopped working briefly, once, a long time ago—I tapped on it the pump and it seemed to be back to normal—until last night. The pump seems to have stopped working, permanently. The blue LED is still lit, but the BIOS reports 0 RPM on my Gigabyte motherboard, the radiator fan is on, high ( > 2300RPM), and my CPU temp quickly runs past 91º+. It is only a matter of minutes before Windows shuts down with a critical error. I'm running an i7-4770K (not currently accelerated). What could have triggered this? Is there anything I can do to fix it?
Hi, I've bought my Seidon 120v ver. 2 almost a year and a half ago and it's been working fine until recently. A few days ago I've started getting extreme performance issues (almost freezing even in idle), so later it turned out my CPU was overheating (90 degres Celsius and above). The weird thing is that it seems random with every PC boot. The fan is working fine, but the pump seem to not work every time, even though the blue light is on. The pump is getting really hot when the overheating takes place, the radiator is always cool. I've checked the BIOS and there it turned out that the pump doesn't seem to work (CPU fan's rpm is 0 when it happens, while normally it's 2000-2500rpm). I've tried multiple solutions, but none of them worked, it just seems to work/fail randomly after a reboot. When I get it to work it seems to be stable for hours, until the next day, when I have to shut down/reboot. Also happens with Sleep mode. I wish I could get it fixed, because I was happy with the cooler, when it was stable. But the warranty at the local shop lasts only 6 months, so it's over (bought it in January 2016). If I can't get it fixed or replaced by the manufacturer, I would like to at least get some tips what I could try... So far I've tried: - Reseating the pump, cleaning it from the old thermal paste and applying new one (a rice grain in the middle, just like I always do); - Switching cables of both fan and the pump to other sockets; - Setting fan speed to max in BIOS; - Switching back to BIOS default settings; None of this has helped, the temperature is around 80 degrees right at the starts and quickly goes up to 90-91 (I don't keep it running much longer after seeing that). Now, after series of reboots I'm back at around 35 degrees in idle and it's stable. My specs: Moetherboard: Gygabite GA-Z97P-D3 CPU: Intel i7-4790k OS: Windows 10
Hello, I have a problem with my Seidon 120V. When i turn on the pc there is a beep sound like in this video: The pump overheats and then the pc turns off automatically. The following are my computer specifications: CPU: AMD FX 8350 4GHZ/AM3+/16MB MB: ASUS M5A97LE R2.0 AM3+ HDD: SEAGATE 1TB 3.5 SATA 3 RAM: KINGSTON HYPERX FURY 8GB GPU: GIGABYTE GTX 750TI GV-N PSU: CORSAIR CX430W/80+ Thanks for your time.