Search the Community
Showing results for tags 'cpu cooler'.
Found 9 results
-
I just ordered this cpu cooler off of newegg and can't get the colors to change. I tried plugging in the separate controller instead of connecting it straight to the motherboard but then didn't get any lights at all? -
I am looking into using CPU coolers in developing commercial applications with thermoeletric elements (Peltier element). The applications are not related to computers. My applications will operate in home/office environments, involving common/typical room temperatures as the ambient temperature. The hot side will stay at 25 - 30 °C, cooling the hot side of a thermoelectric element. For information only: The cold side of the thermoelectric element will be at 0 - 3 °C. So: the delta-t will be a few °C and slightly above room temperature. Heat to be transported: less than 40 W. Question: Will the designed heat pipe temperature span of your products mach my temperature demands? Or, are your heat pipe temperature design linked to typical CPU temperatures? Thanking you in advance. Yours sincerely, Inge Hommedal Norway
-
MasterAirG 100M looks awesome but due to it's RAM clearance it can't be used with many RGB RAM modules. What's the point of buying RGB CPU cooler for a non-lighting setup? Please, make UFO cooler usable for most of users. EDIT: OK, after CES, I'm waiting for G100M V2
-
Hello, I'm facing issues with my new CPU cooler (MasterAir MA610P), The cooler is functional and assembled properly, but RGB lighting is not working. All the connections are perfectly attached and cooling part is working well. The controller C10L is connected to cooler and Molex and I can feel the controller heating, but lights aren't there. I tried reconnecting every cable and tried playing around with the controllers buttons, nothing seems helpful. Specs: 6700k (LGA 1151) Asus Z170 Pro Gaming (no RGB support) CM G550M PSU CM Storm Trooper GTX 1070 FE Thank you.
-
Or for any CPU Cooler for that matter. I don't want to buy one if I don't know where I can get the Conversion Kit! -
Will masterliquid pro 280 be compatible with am4 socket or need bravket
-
Hello, Just over the past few hours I've noticed that my CM Seidon 120v v2's light has been flickering on and off. Sometimes with long intermissions before coming back on. I was wondering if this was indicative of a failing pump, I've only had this unit for 4 months. The current idle temperature ranges from 37 degrees to 49 degrees at idle. Specs: Intel I7 4790K MSI Z97S motherboard. Corsair Vengence Pro 16 gb ram. GTX 970 4gb graphics card. Any help would be appreciated.
-
So I've currently got a CM Storm trooper case (SGC-5000-KKN1) and was wondering if the H110i GT 280mm would fit or if I should go with the H100i GTX? I can't find anywhere it says it'll fit but I think it should so any help would be appreciated, links below http://www.corsair.com/en/hydro-series-h110i-gt-280mm-extreme-performance-liquid-cpu-cooler http://www.corsair.com/en/hydro-series-h100i-gtx-extreme-performance-liquid-cpu-cooler http://gaming.coolermaster.com/en/products/cases/trooper/ -
I Upgraded my system and as case took the CM Storm Stryker. i5 Processor and re-used my Old Cooler. Wat wonders me is that all though the case looks Good and works fine I can not buy any of default mounted Fans in (so far) any known stores! Further more I wanted to modify my cooler with 120x120x15 mm Fans preferably with a White theme. And Yes CM sells some of these size Fans but only connected to a Cooler which I dont need. Is there a shop where I can find the mentioned Fans anywhere in Europe? Thank u,
