• Announcements

    • CM Nick

      AM4 Socket Support   04/24/2017

      Due to technical issues, the topic on "AM4 Socket Support" has disappeared. We apologize for any inconvenience this has caused and we are trying our best to have this topic back up as soon as possible.   As we read in the topic, there is a lot of discussion going on when the new brackets will be arriving. We can tell you now that the brackets will be ready for pre-order on our CM Store EU tomorrow and will be ready for shipment around the 16th of May.   You can continue the discussion in this newly created topic:     

Search the Community

Showing results for tags 'coolermaster'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Case Mod World Series 2017
    • Case Mod World Series 2017
  • Announcements and Giveaways
    • Announcements
    • Giveaways
    • CES & Computex
  • PC Building Guide
    • Reviews and Unboxing
    • Build Advice
    • Build Worklogs
  • Hardware
    • Cooling
    • Cases
    • Power Supplies
    • Peripherals
  • General Discussion
    • General Hardware
    • Overclocking
    • Game Zone
    • Product Suggestions
  • Modding
    • Mod Lounge
    • Mod Worklogs
    • Mod Contests

Calendars

  • Community Calendar

Found 32 results

  1. coolermaster

    Project „SL5T“ "SL" as you already know from Mercedes Benz, is to make the first impression what this project stands for. Elegance, luxury and simple forms. The MasterCase Maker 5T is used. The interior is as discreetly as possible cleared of all unnecessary elements. The walls are clad with Plexiglas and multi-layered in the design of the mainboard. An elaborate water cooling system is installed which, however, is kept as minimal as possible. A cover is made for the cable area, which provides a window for the PSU and on which the ASROCK logo is placed in case size. The logo is framed with the design of the X99 Gaming I7 as well as I would like the elements of the mainboard to continue the whole case. (The red racing arrows between the lower two PCIe slots) All cables are sleevedin the hardware colors. From the outside the contours of the Maker 5T are emphasized by Plexiglas, where also sponsor logos will be found. So much for the formal part. The Maker5t will be my next Rig, since I have not yet a good portable Gaming PC. So I have now also evasive possibilities when my table times problems and above all I can finally also times my table new hardware miss. Actually, I wanted in this project not so much effort to operate but again will grow the mod again tremendous. Since I now the first time on a separate X99 board change, I dedicate this mod to the ASROCK X99 Gaming I7 And let the whole project be inspired by the mainboard. Hardware CPU: Intel Core I7 6850K Mainboard: Asrock Fatal1ty X99 Professional Gaming I7 Ram: Avexir Blitz 4x4Gb 2800Mhz SSD: Avexir S100 240Gb GPU: Nvidea Geforce GTX970 PSU:MasterWatt Maker 1200 Case:MasterCase Maker5t Watercooling Bitspower NGTX970MGV2 Acrylic (Clear) BP-WBVGNGTX970MGV2NPAC Bitspower Leviathan Xtreme 240 4xG1/4" Radiator BP-NLX240-F4PB Bitspower Leviathan Slim 280 4xG1/4" Radiator BP-NLS280-F4PB Bitspower DDC Plus Pump BP-DDCPLS Bitspower DDC TOP Water Tank Integrated Kit 300 (POM Version With Z-CAP II) BP-DDCTOPWTIK300PC3-BKCL Z-Tube 250( ICE Red) BP-WTZACT250-IRD Bitspower DDC Pump Cooler Bracket (Red) BP-DDCPCBT-RD Bitspower Pump Cooler For DDC/MCP355 (Red) BP-DDCPC-RD Bitspower CPU Block Summit EF (Intel) (Acrylic Top Version) BP-WBCPUIAC-CUMBKWH Bitspower CPU Block Plate For Intel CPU (Deep Red) BP-CPUIPT-DRD Bitspower G1/4" Deluxe White Enhance Multi-Link For OD 12MM BP-DWEML Bitspower G1/4" Deep Blood Red Enhance Multi-Link For OD 12MM BP-DBREML Bitspower Deep Blood Red Enhance Rotary G1/4" 90-Degree Multi-Link Adapter BP-DBRE90RML Bitspower Deep Blood Red Enhance 90-Degree Dual Multi-Link Adapter BP-DBRE90DML Bitspower Deluxe White Enhance Rotary G1/4" 90-Degree Multi-Link Adapter BP-DWE90RML Bitspower Deluxe White Enhance 90-Degree Dual Multi-Link Adapter BP-DWE90DML G1/4" Deluxe White Rotary 90-Degree IG1/4" Extender BP-DW90R G1/4" Deluxe White Mini Dual G1/4" Extender BP-DWWP-C42 G1/4" Deluxe White Rotary G1/4" Extender BP-DWRG G1/4" Deluxe White Muti-Transfer Adapter BP-DWWP-C03 G1/4" Deluxe White IG1/4" Extender-15MM BP-DWWP-C60 Deluxe White Mini Valve With Black Handle BP-MVV-DWBK Deluxe White Q Plus-Block BP-DWFMB G1/4" Deluxe White Stop Fitting BP-DWWP-C06 Bitspower None Chamfer Brass Hard Tubing OD12MM Deep Red - Length 300 MM BP-NCBHT12DRD-L300 G1/4" Deluxe White Aqua-Pipe I BP-DWWP-C17 G1/4" Deep Blood Red CaseTop Water-Fill SET BP-DBRWP-C04 X-Station Mini Power-Extension I Female Version BP-MINIXSP1F-RD Bitspower Logo Aluminum Thumb Screw For 632 (Deep Red BP-LATSC632-DRD Bitspower Logo Aluminum Thumb Screw For 632 (White) BP-LATSC632-WH Bitspower Metal Tubing Cutter BP-CMMTC Bitspower Flow Indicator BP-FI-CLBKWH Red Blade For Bitspower Flow Indicator BP-BFI-RD Control: Aquacomputer Aquaero 6 XT equipment Fan:2 x NB eLoop B12-1 ,3 x NB eLoop B14-1 Headphone:MasterPulse Keyboard:MasterKeys Pro M Sketches In order to bring the project as smoothly as possible, I took this time a bit more time on the computer and already times sketches for the different covers created. The elements are glued together in several different colors. Partially varnished, partially foil and partly (only) polished. For use comes Plexiglas in various colors and thicknesses, aluminum foils and varnishes. This is only the rough basic idea, should expect again but not look good I let myself think of something else: thumbup: This cover comes on the right side in the case inside where the drive bays sit. To the right the original pattern and to the left the lighting effect. Here the front, whether the red arrows will really work well, we will see Here the front of the PSU cover, the design on the left will frame the window to the PSU And here the elements for the Windows, not completely in red but as template it is enough Hardware pic´s The majority of all components are already there, but see for yourself: A big thanks goes to all who support me with this project: ASROCK COOLERMASTER BitsPower Blacknoise Avexir
  2. PROJECT PV2 by Paulo Reis Aka EVILPT WORKLOG About Myself First of all I will introduce myself my name is Paul I'm 36years old and live in Portugal "Sintra" I am computer technician and as was expected love modding. I hope you enjoy the PROJECT PIPELINE V2 "PV2" Design Concept The project PV2 After several incentives and support I was led to do Version 2.0 of the Pipeline Project. Then the whole project goes back from the crystalline and open structure with an EL 110v cable lighting and a giant watercooling system made by me with full support from Alphacool. The water besides walking through the conventional tubes still walks inside the 32mm acrylic structure of the PV2. I always found this type of structure fascinate and different I hope you like it as much as I liked doing this project. Best Regards and good luck too all. Portugal Mod Squad. Tks To All.. Sponsors Very Happy to Announce my Sponsors COOLER MASTER PORTUGAL TKS Sofia!! ALPHACOOL - AQUATUNING.DE TKS EDDY!! AVEXIR TKS Peggy!! AND ALL AVEXIR TEAM Materials to be used in the design of this Project PV2 Material to be used in the design of this Project Acrylic Ex Cristal Tube 32mm Acrylic water tube 16mm ALPHACOOL Fittings 16mm ALPHACOOL Reservoirs 250mm with Pump DC5 ALPHACOOL Sleeving Cable By Paulo Reis and PHOBYA 6 Fan Connector PHOBYA PVC Water tube 32mm Grill Mesh Spray "Black Mate" Spray "Black Textured" EL Wire LED Strip Aluminum Tube 10mm *Silicon tube 3mm and 4mm Wire 0.22 Soldering iron Station by VELLEMAN Hardware Motherboard: MSI Board "NOT Sponsor" Avexir DDR4: 16GB Quadchannel Blue Led Raiden Effect Avexir SSD S100 Blue Effect CMaster: JetFlows 120 Blue CMaster: Power supply V650 M GPU: ATI HD7870XT Watercooled CPU Intel 1151: I7 6700k LET´S START WORKLOG PHOTOS p FINAL PHOTO PROJECT PV2 BY PAULO REIS AKA EVILPT VIDEO OF THE PROJECT PV2 "ON" PV2 Video HOPE YOU LIKE THE PROJECT TKS TO ALL SPONSORS, FRIENDS AND MY FAMILY FACEBOOK: https://www.facebook.com/PauloReisakaEvilPT INSTAGRAM: https://www.instagram.com/evilpt/ TWITTER: https://twitter.com/evil_pt
  3. In contrast to many modern mod I do not use automatic machines for precision cutting, but use only small styling tools and old manual cutting systems (flexible, dremel and etc. etc.), this my challenge concerns the amendment of a new MasterCase pro 6 Cooler Master , I'm going to change in the interior with wrought iron bulkheads, the predominant color is silver, and I will use a specific texture to reproduce the rage of an velociraptor. Below the beginning of my new project
  4. Hello everyone ! I am a french modder and I want to introduce you my project ! The theme will be "polygon" I want to create a mod very airy, with a design you won't get tired of. To achieve this, I will play with both sides of the mod. My goal is to really entertain the viewer from the front, from the right as well as from the left. I will transform a lot the case while maintaining the main lines, so it remains recognizable. To do so, I will use sheets of aluminium, steel, synthetic glass, paint, led, etc.. I chose the "MasterBox 5T", because it is less common on this competition, and furthermore, I think there is a huge potential for modding. Additionally its basic forms glue tightly to my themes. There isn't too many right angles, and it has many facets . The configuration will be : The COMPOSANTS Case => 'MasterBox 5t' Mother-Board => Rog Strix z270g Gaming 'Asus Sponsor' Processor => 'Intel Core i7-7700k' Graphic card => Rog Strix Gtx 1050ti 4Gb Gaming 'Asus Sponsor' DDR4 => G-Skill Trident Z RGB - F4-3000C15Q-32GTZR Psu => Corsair SF600 (Pas le choix format et puissance oblige) Solid-state drive 1 => Samsung SSD 960 EVO M.2 250GO Solid-state drive 2 => 840-evo 250 Gb ssd Hard Disks x 2 => Seagate Laptop SSHD 1 To Player BluRay => BRXL-PT6U2VB Player-memory cards => Lecteur cartes mémoires WATERCOOLING COMPOSANTS Waterblock processor => Ek-Supreme LTX Acetal + Nickel ( N'est plus référencé sur le site EK) Waterblock graphic card => EK-Vga Supremacy Radiateur => EK-CoolStream SE 360 Fans x 6 => EK-Vardar F4-120ER (2200rpm) Pompe => EK-D5 Pwm G2 Motor Réservoir => Alphacool Eisbecher D5 150 mm Plexi Fittings x 10 => EK-HD Adapter 10/12 mm Fittings x 4 => EK-AF Angled 90° G1/4 Black Fittings x 3 => EK-AF T-Splitter 3F G1/4 - Black Fittings x 3 => EK-AF Extender Rotary M-M G1/4 - Black Fittings x 1 => EK-AF Pass-Through G1/4 - Black Wc liquid => Ek Cryofuel clear Premix 900ml Good luck to everyone !
  5. Hi there, Many people experiencing expeirencing same problem on their mouse from Masterkeys Lite L combo set so i decided to make main thread about this trouble. So, the static mode with option to change colours not working after some time after purchase. The light stay at cyan colour (for me) and nothing happens when clicking DPI button + back button on the side. This command (dpi button + back button) isnt totally broken because im able to change effect speed ONLY in color cycle mode - in other modes like static, static breathing nothing happens too. Tried every button combo and nothing change color in static mode. It's really annoying because mouse static light mode stuck on one colour (last user setting). It's looks like internal memory bug or something related to mouse firmware. I think best way to solve this will be make a software where we can change light via pc. Cooler Master please fix it but remember - return is not an option for some people becasue they got this mouse in set with keyboard and returns/warranty servicing must took whole set with keyboard... If someone know how to fix it please reply in this topic - let's fix that worldwide problem ! Kudos for any tips/infos/solution/answers
  6. Hi Guys! I'm here to present my entry for the Tower Mod category of Case Mod World Series 2017! The Project is based on a Coolermaster Mastercase Maker 5T. It's called "Pure Binomial" because the theme is based on the binomial between clear and non-clear parts, in fact, the front and back panels will be almost completely transparent, allowing to see the internals from different angles. It will also feature a really complex custom loop with CPU, RAM and GPU blocks, a 360mm radiator, and three 150mm reservoirs, as well as a 755 pump. So, let's begin with sponsors and then we'll head to the modsss! Seasonic - PSU Seasonic Prime Titanium 750W Coolermaster - Coolermaster MasterCase Maker 5T Aquatuning - Watercooling, cooling in general, lighting Nanoxia/CoolForce - Pass-through fittings VG Informatica Torino - Sleeved cables Apacer Global - SSDs Panther AS340 240Gb So, let's start with the pics! A new update will come soon, the watercooling loop will start to take shape so make sure to subscribe guys!
  7. Hello dear friends. We are very glad to join CM2017. We will working on CoolerMaster Master Case 5, special thanks to CoolerMaster Iran, who gave us that amazing case! We've named this case modding CITADEL, as a symbol of armored and strong structures. wish we luck!
  8. atcs

    Go big or go home. Seems to be the mantra of modding as of late. Dramatic, some bordering on flamboyant. I mean, this is still case modding! It's an art form, and everyone interprets art differently. Sometimes to beautiful and BRILLIANT effect. I have loved looking over the entries over the years. Masterful craftsmanship, and I applaud you all; past and present makers of the modding art. When I read about the 25th Anniversary case mod competition, and the special section regarding using/referencing past classic CM cases, I was immediately inspired. For, in my garage, I have held on to a pristine ATCS that I won at Quakecon man years ago. I recognized it then for it's classic beauty and simplicity. The perfect canvas for many modders. Straight lines, full side panels, and the inside frame of the case is almost as special. So... what better way for me to get back into the thick of it, then by using my prized prize, and bringing it into the 21st century! My goal of the build is to take the case and it's internals, and rework it to accommodate modern 120mm (maybe 140mm, but I wont know until I get into the box) and, just like a car that is a "sleeper", you won't know what is lurking under the hood! It will look nearly stock. Body work, metal work, etc to allow the beast within to breathe and groan... but maintain as much of the ATCS simplicity to keep you guessing! It will be a fun trip down memory lane, with reverence and respect that I will be channeling on one of my prized, untouched cases. Stay tuned, and (to shamelessly plagiarize the move "Dune") watch as "the Sleeper awakens!" PS: After re-reading my log this morning, I opted to just name the project "Sleeper", as I dont want to cause any confusion. Its not a "Dune" mod, it's theme going to be a ATCS time warp!
  9. Hello! I represent to your attention project “StringTheory”. The project «StringTheory» is in itself a spontaneous one and the beginning of work on it is moving at a rapid and creative pace, new ideas keep emerging, everything is changing within the chosen concept. I still can't tell you all the details but i assure that it's name would be entirely justified. Also everything will be gradually appear in the worklog. And you will be able to enjoy all stages of the process. In the meantime, I'd like to say that the film "Interstellar" and the case of CoolerMaster Cosmos II inspired me to realize all this. P.S On the base of COSMOS II (RC-1200-KKN1) I want to create one of the best modprojects. And even my torn shoulder ligament wouldn't prevent me from doing it. Main components: CPU: intel Core i7 7700k (@5100Mhz 1.26v Air); Мotherboard: ASUS ROG MAXIMUS IX FORMULA; Videocard: ASUS ROG STRIX-GTX1080-O8G-GAMING; RAM: HyperX FURY Black Series HX421C14FB2K2/16 х 2 ; SSD: HyperX Predator PCIe SSD SHPM2280P2/240G; Case: CoolerMaster COSMOS II (RC-1200-KKN1); PSU: CoolerMaster V1200 Platinum; FAN#1: Cooler Master MasterFan Pro 120 Air Pressure (MFY-P2NN-15NMK-R1) x6; FAN#2: Cooler Master MasterFan Pro 140 Air Pressure (MFY-P4NN-15NMK-R1) x3 Watercooling components: Bitspower GTX 1080 ROG Strix Acrylic Limited Edition (Clear) BP-WBV1080ARS-RGB5 My review: https://www.overclockers.ru/lab/80702/obzor-i-testirovanie-vodoblokov-polnogo-pokrytiya-bitspower-i-ekwb-dlya-videokarty-asus-geforce-gtx-1080-strix.html Bitspower Summit EF Ice Black (Intel, Acrylic) (BP-WBCPUIAC-BKMBKIBK) My review: https://www.overclockers.ru/lab/79149/obzor-i-test-processornyh-vodoblokov-bitspower-summit-ef-i-watercool-heatkiller-iv-pro.html#2 Fittings: Bitspower. Reservoir: BARROW 270MM LFPG65-V3TGB Top: EK-XTOP REVO D5 - PLEXI Radiator #1: EK-CoolStream SE 360 Radiator #2: EK-CoolStream PE 360 Radiator #3: EK-CoolStream CE 420 p.s Sorry for my English. The project is completed More photos next : Worklog First I dismantled the case CoolerMaser Cosmos II: Morning After the case RC-1200 was dismantled, it was necessary to start working on a new external and internal view.
  10. Hello ! I am Bilal Moolji, an engineer and marketing professional, a tech enthusiast, a graphic designer and a musician by passion. Two years ago i developed a passion for gaming computers and started my own brand called Cezor. I wanted to forward this by adding my passion for creativity and hence explored the world of pc case modding. Having built and modded a few coolermaster cases, this year i have decided to challenge myself by registering for the Case Mod World Series 2017n using the Coolermaster MasterCase Maker 5. More updates on the build shall be posted soon.
  11. Hi, I'm Mike Wang and I'm from Taiwan. This mod is inspired by ASRock Mainboard Taichi. I use CoolerMaster MasterCase 5 to Build this Tower Mod. Please enjoy my build. Finish
  12. Hi, I'm Mike Wang and I'm from Taiwan. This mod is inspired by Blizzard's FPS game "Overwatch" Blizzard made a short animation for Overwatch called "Dragons" The story is about two brothers, and their internal conflict about each other. Inspired by the animation, I build a Desk Mod PC. This build have an animation scene, and water cooling with Overwatch logo. Please enjoy my build. Finish!!!!!!!!
  13. This project intends to achieve three objectives: Simple, Pretty and Functional. I chose the name DuZeru, because i love opensource, and DuZeru its a brazilian GNU/linux distribution and fulfills the three objectives. Anyone can use GNU/Linux, anyone can do modding, anyone can do watercooling, if it wants to do it, and anyone can make a project with this three gols in mind. I will use the Master Case 3 Pro.BIG THANKS TO COOLER MASTER AKA Sofia Mota The color scheme of the Duzeru mascot (orange, black and white ), hand tools, watercooling, painting and some hardware i have. Mascot "Lobo Guará" (Endangered species) ------------------------------------------------------------------------------------------- Specs: - Case: Master Case 3 Pro - Power Supply: Masterwatt 700 Lite 80 Plus - Motherboard: ASRock > FM2A88X-ITX+ - Processor: AMD A10 7850K 3.7Mhz - Memories: 2x4Gbs DDR3-2133 Corsair Vengence Pro Series CL9 - SSD: Kingston Hyper X Fury 240 - GPU: GeForce GTX 1070 Quick Silver 8G OC - Fans: 2xMasterfan pro 140 Air flow and 1xMasterfan pro Air Pressure Watercooling - Watercool HEATKILLER® IV PRO - Phobya Balancer 450 silver nickel - Pump Phobya - Alphacool NexXxoS XT45 Full Copper 140mm radiator - Thermaltake C1000 Opaque Coolant White - V-Tubler PETG Tube 5/8” (16mm) OD 500mm - Pacific G1/4 PETG Tube 16mm (5/8”) OD Compression Fittings – Black ---------------------------------------------------------------------------------------------- Thanks for the sponsors Cooler Master DuZeru Modaafoca Rumos Kingston FINAL PHOTOS
  14. Rocket League is one of my go to easy to play relaxing games with 800+ hours on it its something that I very much enjoy. This had led me to want to do this Case Mod. I have some great ideas and after I get the last few parts this project will take off. Stay Tuned
  15. Hi guys! My name is Matteo, from Italy! This is my second Mod and by far it has been a beautiful journey The story of this mod is crazy, actually the guys at Cooler Master sent me the Master Case after meeting at a 3d printing event in Milan and since then we started a great relationship. The theme of the mod came up in my mind after a long period of travelling with my girlfriend I present to you the "ONI" which is the japanese demon described as spirits of the dead, of the earth, of the ancestors, of vengeance, of the plague and/or famine. The reason behind this choice will remain a secret to you all. I hope you'll enjoy my work! spec list: Cooler Master Master Case Maker 5 Intel i5 7600k MSI Z270 gaming pro carbon Hyper X FURY 32gb DDR4 (4x8) MSI GTX 1070 Gaming X (SLI) MSI Limited Edition SLI Bridge 240gb SSD M.2 Kingston 240gb SSDnow 300 V Kingston 120gb SSDnow 300 V Kingston Cooler Master G750M psu Alphacool Watercooling BIG THANKS to my Sponsors: COOLER MASTER, AK INFORMATICA, AQUATUNING, MSI, HYPER X
  16. Casemod Scratch, será baseado no tema da série de personagens (CHAVES). Série Telivision da América Latina. Aqui em meu país Brasil, foi uma boa éopca que marcou um monte de gente e gosta até hoje. SOBRE SERIADO Chaves, ou El Chavo del Ocho, é uma comédia de situação que aborda as interações de um grupo de pessoas que vivem em uma aldeia pobre. O protagonista, Chaves, é um menino órfão de oito anos de idade, que muitas vezes enfrenta problemas com adultos, incluindo o Seu Madruga, Dona Florinda e Dona Clotilde devido a mal-entendidos, distrações ou travessuras. Ele também vive com seus amigos Quico e Chiquinha, que são da mesma idade. A parcela, praticamente, se desdobra nesta aldeia, sendo Seu Barriga, dono do mesmo e os moradores Seu Madruga, Dona Neves e Chiquinha, que moram na casa 72, Dona Clotilde, apelidada de Bruxa dos 71 pela sua aparência eo número De sua residência, e na casa 14 vivem Dona Florinda e seu filho Quico, com o professor Girafales como visitante freqüente da aldeia. Casemod Scratch, I ' Vai começar do zero. Será uma nova experiência, pois será o meu primeiro Casemod Scratch montado sem uma estrutura de armário ... A série das (chaves), passa em uma aldeia, o personagem (chaves), usa o barril como sua morada, e sempre a referência do personagem, é ele está dentro do barril com a parte do corpo fora o mesmo na foto abaixo. Ele tem o episódio de teclas, que é um serial, e tem o desenho animado. Eu vou me basear na série de desenhos animados. Siga as fotos abaixo o que eu quero fazer.
  17. WINDOWS 7, 8 & 8.1 > Devastator Backlight Doesn't Turn Off at Shutdown Note: BIOS settings, options and choice of words can be different. Enter the BIOS search for Advanced Controls > Advanced Power Management or Power Management > Enable EuP Ready option. Enter the BIOS search for Advanced Controls > Advanced Power Management > Enable ErP Support or ErP option or ErP Ready. [brand specific: Gigabyte]. No progress? Clear the CMOS, and try the steps above once more. Read your motherboard user manual to find out if there are any specific bios settings or jumper settings that deal specifically with USB power settings. Easy fix: flip the PSU power switch 'OFF'. (Not actually a fix but a temporarily option). The USB power options after shutdown are mainly for USB charging devices (Smartphones or Tablets, etc.) MAC OS X > CM Storm Devastator Backlight on MAC OS X Note: This is an unsupported work-around, but suggested for MAC OS X users. Download the HID LED Test tool kit: https://developer.apple.com/library/mac/samplecode/HID_LED_test_tool/Introduction/Intro.html Open the folder 'Build'. From 'Build' open up the 'Release' folder. Once 'Release' is opened, it will pop-up an output. The Devastator will start cycling and blinking. Once all the keys are lit up hit 'Ctrl + C' to terminate the terminal. The Devastator backlight should work now. (Credits: ninjasiat, and others on the Apple forums). LINUX [under construction]
  18. Project Made it Mine is a direct association with Cooler Master and there motto Make It Yours. For this project I have started with a Cooler Master Master Case 5t and I have literally stripped it completely down and have started to rebuild this into a case that really meshes with my personal design ideas and concepts. I want this re design to be overall a little bit smaller then the 5t with a lot of style, functionality and performance. This project is well underway and ill update this post with some progress pictures soon so stay tuned!
  19. gold rush

    Hello, Welcome to the logs for GOLD RUSH. What is Gold Rush ? Gold rush is an exotic project with 24ct gold plated fittings, Backplate, and whatever else i can get my filthy paws on The case it's self will be, cut up, and resprayed in a white/gold flip paint. Featuring a parallel loop and a gold mine on the shroud, this project will be a show stopper. SPECS! We all love a good read at this part From Coolermaster Cooler Maser MasterCase Maker 5 Cooler Master V1000 PSU Cooler Master Masterfan airflow 140mm From Alphacool Alphacool Eisblock XPX CPU - Intel/AMD - silver matte Alphacool NexXxoS XT45 Full Copper 280mm radiator Alphacool NexXxoS ST30 Full Copper 280mm radiator Alphacool NexXxoS GPX - Nvidia Geforce GTX 1070 M02 Alphacool Eisbecher 250mm Acetal reservoir Alphacool VPP655 PWM - G1/4 inner thread including Eisdecke D5 - Acetal V.3 Alphacool Eisrohr 16/13mm PETG HardTube Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 Alphacool Eiszapfen angled adaptor 45° rotatable G1/4 outer thread to G1/4 inner thread Alphacool GPX SLI Connector - Single - Plexi Alphacool double nipple G1/4 outer thread to G1/4 Alphacool angled adaptor 45° - G1/4 revolvable - 2x inner thread Phobya 90 angle x2 From ASUS ROG ASUS Maximus IX CODE Z270 Motherboard ASUS Strix GTX 1070 OC Graphics card From Cablemod Gold / White Custom sleeved cables RGB-W Hybrid LED Lights +3 extensions From Team Group 16GB 4x4 @3466mhz T-Force XTREEM Gold. Other parts Intel Core i7 6700k @ 4.8ghz Design i've never been very good at 3D modeling software, so i do my best in words to describe the mess in the image lol. Now a few things to point out. The loop under the GPU will no longer be zig zagged, it will be a straight 45 degree angle from GPU to Shroud. Around the base of the reservoir and where the fittings meet the shroud, there will be pyrite fools gold set around them, like gold is forming around a hot chamber. The name ''gold Rush'' will be cut from the shroud, and filled with pyrite (Fools gold) for a more authentic look. Sponsor logo's on the front will be made from real 24ct gold leaf. The gold triangles you see on the case will be cut outs, and meshed for looks and ventilation. The mesh will be gold too. Time Frame I'm guessing at 4 weeks, as this is the biggest project i've undertaken yet and by all means the toughest work yet. Media Over the next 4 weeks i'll be doing a VLOG of the build progress, out on the road, at home, wherever i need to go, be sure it'll be on video. i expect 4 episodes 1 for each week. Don't fret, as pictures will be uploaded as i go for the project logs and social media. Teaser Now we can get this show on the road. PICTURES!!!! Fred is on hand to help me out! Cooler Master Masterfan Pro 140 - Air Flow fans https://imgflip.com/gif/1ikq7k][/url][url=https://imgflip.com/gifgenerator From ASUS, The mighty Maximus IX Code Strix 1070 OC Finally The Cooler Master Mastercase Maker 5 I got to work as soon as the case arrived. First i cut and fitted the front shroud (first of 2) You'll see what i mean later I then cut the rear I/o Cover thingy and fitted that Case / Motherboard / Fans and radiators are due into the auto shop on monday to get flip painted. So my next update before then will be the arrival of Alphacool products. Excited now it's all finally moving along. Will bring more updates as i continue.
  20. Concept Lore : A relic lost in time chiseled out from the most potent tree of the Night silver Woods to celebrate the most fearsome generals of the ancients, the there spirit brothers, The living embodiment of three major forces of nature, Storm, Earth and Fire it is said that this ancient masterpiece releases a very powerful magic that resides in its core cleansing out the darkness with its colorful yet destructive powers when it reveals its hidden secrets. Concept : The concept of the mod is to infuse older methods of art into new technology. a blend of grace and power. so to do this i thought of using a big mahogany log as a rough canvass to carve out 3 of my most favorite characters from the Dota 2 universe and to build a mechanical system around it. The log is carved into 3 pieces with it's innards removed to accommodate the liquid cooled pc in the center. This two piece frame method is a new concept i came up with which lets the user to either use the central piece which is the actual system with all its components and a custom liquid loop built into a cylindrical bare bone shell i designed with the parts of a master case as a standalone unit which you can keep on a desktop, or use the whole setup on all of its glory with the cool outer frame with statues which acts as a buffer as well as a case to shield the hardware and all its internals from any misfortune and still have a way to showoff the beefy tech inside. with this new method if its built into an even a smaller compact form of a standard desktop tower, it lets the users easily clean or upgrade the machine without a hassle or just repaint and do all sorts of crazy things. The full case has 3 modes that we can use to control the unit to open and close it. Automatic , manual wireless and full manual override mode. The outer case which holds the statues and the carvings is controlled by an arduino with sensors which runs a small script that detects the temperature of the case and if it detects any temperature anomalies it will open up the bay doors(which are the swords) and lift up the case to let some cool air in and automatically close when the temperature is back to normal. the mod also has a remote controller which can manually open up the case from a distance whenever you feel like your case needs some fresh air or just want to show off or admire your build and it also has a manual override switch in case your arduino suffered a catastrophe and you ran out of battery on the remote controller because you kept opening and closing it just because its frigging amazing so i added that feature as a fool proof to save myself from the hassle of just loosing the remote somewhere which i already did! (shutout to the Chinese seller on eBay who sent me a backup remote!) the lifting mechanism is made with a linear actuator on a cross lift setup to hold the weight of the rig inside and a simple push pull arm mechanism is used to push the bay doors outwards like a flower. Every pattern and detail is hand carved with traditional wood carving tools with countless hours of concentration and elbow grease. the script and the lifting mechanism and the door opening system is originally made and fine tuned to make it work as neatly as possible with the resources i had at my disposal. Enjoy the photos!!
  21. HELP! I order a Coolermaster Quickfire TK Keyboard almost a year ago through Amazon - it has media controls when the fn key is pressed (so the orignial fn keys are off for that time). Because I'm silly, somehow I broke the FN key so the stem was snapped in the keycap. I tried fixing it, and somehow the FN key is jammed down and the stem is stuck in the pressed mode. Because of this, the FN key is on constantly, which means the media keys are enabled permanently and the F1-12 keys are unusable. I doubt this is under warranty, but is it worth contacting support? Are there any fixes I can make to disable the key (obviously media controls are not as important). Please help me, if you can. P.S. The way the key is meant to work is - The default state is F1-12. If you hold the FN key while pressing one of these, it will activate the media controls instead. Holding it for 3 seconds puts it in this mode permanently. THIS IS WHAT STATE I THINK IT IS IN, I CANNOT CHANGE IT. PPS. My S key LED is often dim/gone randomly, another issue but I'm not bothered about this. Maybe it will help me be more eligible for warranty?
  22. Hello everyone, I made a video on how to record a macro for a Cooler Master Storm Gaming mouse. If you have any questions, please feel free to ask! (only related questions about macros). Cheers, Cooler Master Representative Pim
  23. My Sentinel III software stops working everytime I try to create a macro. If I press the "New" button the software stops working. I already downloaded the latest versions of the firmware and software. Can someone help me, please? (since I bought this mouse mostly because of the Macro function)
  24. 3-Pin connector pumps Please do not modify the pump speed. Lowering the RPM might result air bubbles or a decrease in performance. Lowering the pump speed could also damage the unit, and might result in a failing pump. New water cooler noisy? Rattlin or ticking pump noise? Air bubbles might be stuck in the loop. Please let the pump operate for a good day. Still experiencing noise? Please contact the support or request RMA. Cooler Master cases & water cooling support COSMOS II COSMOS SE HAF X CM 690 III