Search the Community
Showing results for tags 'cables'.
Found 4 results
Hi, I bought a cooler master cosmos c700m 2 months ago, building the pc bit by bit, when I got to the point of having the PSU + MOBO, i connected the relevant cables to it and everything was perfect. Up until today the leds were working perfectly, i finished assembling the rest of the pieces, AIO/CPU, RAM, m.2, etc. and was having an error with the cpu fan. While checking the cables I noticed it was placed on an incorrect pin so naturally plugged it correctly (before figuring that out, i was re-arranging the connectors of the PC and unplugged both the sata x2 and the power cable that goes on top of the PCB on the mobo (case). The thing is for some reason now the leds dont work at all, all the 4 fans of the case work flawlessly, but the leds of the case are completely dead, also the buttons of the front panel (audio and usb works perfect) dont work, neither the fan speed control lights & functionality work, and the lights & buttons of the led control stay all 3 on but unresponsive. I tried plugging the 4 connectors of the LEDs in every order on the 3 available 3 pin cables (theres one that's missing 1 pin in the middle? dunno if that's normal) according to the manual 1 connector will remain free out of the 4 if the user would like to add another led stripe, before i tried plugging that one in the mobo next to the fan pins -.- Anyway i'd like to know if caused a short circuit or something or what is happening? since in the manual doesnt specify an order on how the led 3 pin connectors should be connected unto which (i did notice they have a small number printed on the connector but they dont match each other)
Hello, I've bought a second hand power supply, though the seller's hasn't sent me the input power cable. So I've bought a 230V - 6A input power cable but I'm not entirely sure if this is right for this Power supply. Is there anyone who can clarify this?
Just plugged in a v850 to a x99 board and couldn't find the atx4p cable in the pack. Since this system w:ill have a gpu, a physx gpu and a couple of bm cards in it I need an atx4p. Do I have to get a full new cable set to get this? If so, which CM set has it in? (UK based)
I have just installed a Gigabyte Z87X-UD5H motherboard in a HAF X case. I installed all the cables except one. I have been trying to find out what the cable is for, what it does and so where it is supposed to be plugged in. The cable in question is a black and redtwisted pair, shorter than all the other cables. The cable ends in a pin at the end of each, the balck and red cable. There is also a white guiding plastic connector beside the pins. What this cable is for is, unlike the other cables in the case, not mentioned in the manual. I have a second question. Situation - The manual mentions the cables and where to plug them in, on the motherboard, stating that certain colours should be on the positive connector. The problem is that all the cables have different colours to the ones mentioned in the manual. The only way I can tell where they belong is by the fact that the connector on the end hs marked, ie, USB, Audio, etc. However I don't know which side of the connector is the positive (+) one. I did notice that the connector had a small arrow on one end. Question - Does this arrow indicate the poistive? As I have 3 more PC's to install, I would like to have an answer, before I plug the wrong side of the cable in or just leave a cable hanging. Thanks