Search the Community
Showing results for tags 'xb'.
Found 3 results
I was thinking of buying the HAF XB EVO for a new lan build. I have a very long power supply and it wouldn't fit in the HAF XB. I was planning on removing the X-Dock, which would provide me with plenty of room for the psu. The only problem is the hole in the front panel that would be left. Is there any easy solution to this? Thank you for your help.
Disappointed in this Cooler Master product. I have decided to keep it, but will think twice on my next purchase if this is a sign of things to come with the Cooler Master HAF product line. Very cheaply made. Screw holes in the sheet metal do not line up very well. Lots of conveniently placed thumb screws, but the misaligned holes and poor threading makes them very difficulty to use. Use of space per cubic foot area is poorly done. Cases with this volume normally sport 6-8+ bays, this one has 4 x 3.5inch HD bays and two CDROM bays. With todays push towards 2.5 inch form factor you would think they would have employed this into there design to utilize the space more efficiently. Power supply buts up extremely close to the two internal 3.5 HD bays. This will make changing out these hard drives a nightmare if they fail. You will have to take the two sides and top off, disconnect all power supply leads , then remove the motherboard tray and finally remove the PSU to access the HD SATA and power connectors. This is a shame as the drives slide into the bays quite easily with the provided clip in rails. Also, with every insertion and removal of screws and trays, the black paint comes off.
I've just purchased an HAF XB which I'm building as a general purpose PC, optimized for photo and video editing. (I was drawn to the MB-on-top, full-ATX layout.) I haven't built a PC in a dozen years and, until now, I was unfamiliar w/ hot-swapping - I thought that was what happened at key parties. (Har!) So I assumed, from the web photos, that the openings were 3.5", where I could install, e.g., a memory card reader or... IDK, a floppy drive? What else is 3.5"? It turns out those front openings are 4.75" - an odd size. Consequently, I bought a 5.75" card reader, which takes up a slot where I'd rather have a second optical drive or I/O panel for audio production. I've got two 3.5" HDD inside (2TB, mirrored) and a 2.5" SSD mounted to the memory card reader chassis, and I don't need a hot-swap drive. (Or do I? Please tell!) I could remove the hot-swap cage, perhaps find a 3.5" cage for other I/O possibilities, but I doubt the openings would line up correctly, or even be the correct height. I'm struggling to come up with another use for the openings and that lower-right corner of the case. I've even thought about buying a full tower case instead, for the additional I/O possibilities, and building a HTPC, which I don't need but I've probably got enough old parts laying around to build, just to use the XB case, which is awesome, and (at 17") is a perfect width for an A/V cabinet. Or just wait it out - perhaps I'll want another two HDDs someday. Any other ideas?