• Content count

  • Joined

  • Last visited

Everything posted by Zenator

  1. Hello Again I had not planed on doing a second build for the world series but I still have time for something small. I have been thinking about doing a small form build for some time and i've been wanting to do a white build as well, so for this build im looking at doing a build in white and making it slim. I Will be using a Master Case Maker 5 and a Cosmos SE More again later.
  2. Guardians Of The Galaxy 2- But still Thinner :)

    Hi yes of course. Some back ground info first. Two of my friends and my self where out of work and one of them had a small payout from a car accident. I was just made redundant from a sign shop where I was a spray painter and had some sign writing background. And was asked if he got the printer to make signs would I help. And of course I sad yes And my self being the only one with any sign writing background it was going to be a slow start, so for the last 3 months I have been learning how to use IA and how to print using a Roland printer for the first time. I printed them out on the Roland printer. This was the first time for me doing this so I had a lot to work out. The CPU and GPU blocks have a clear and black plastic Block out sheet that can be removed. I scanned them in at 300dps and turned them into vectors in AI. Then used Photoshop to redesigned them to be printed out. The prints where done using 3M clear vinyl. I designed them using two layers the first layer was printed using a silver ink to block out parts that I did not want the light to come though, And other parts like the logo's where left clear in the vector to let the light out. Then it was printed in color over the silver leaving the clear open for light. I then hand cut some 1mm clear acrylic to the same shape and applied the vinyl, drilled some new holes in the 1mm and put then back on the blocks. The RGB strip is part of the Bitspower GPU water block as it comes from Bitspower. How ever I did add a RGB strip to the top and side of the CPU block, all it had was two spots for a LED's. And I wanted to match the GPU RBG. there is two RGB headers on the MoBo the motherboard side uses one RGB header and the fans on the back uses the other. I used 3 Cooler Master RGB spliters to get it all to sink off the ASUS ROG Aura headers, All 6 fans and water pump are running off the fan headers on the MoBo as well. Hope that helps. I would have documented more of the build but time was very much against me. Ken.

    Hello again every one! I'm back again with a new build, This build was done with the Gears of War 4 Xbox1 limited edition console in mind. I wanted to recreate the look of the console in PC form now that the game can be played on PC with windows 10. plus mod the Maker 5 & 5t cases used in a way that would still keep the CM case looking like it was designed that way from Cooler Master and still make it work and look different to the normal 5t without making it too obvious that case was changed, I still wanted it to be seen as a 5t with a custom look and theme with a clean and not so clean look. . To start off the build done with the Master Case Maker 5 and the Master Case Maker 5t. The Case comes with a tin box with all the screws and other bits and two other parts that I will need to look into. The box also has soft rubber back on it that is also magnetic. witch I think is a nice touch. The case also comes with a Red led magnetic strip. That archers to the ran controller that's fitted to the back of the Mo-Bo tray. Now for some hardware info: Mobo: R.........................? No I don't think I'm going to say just yet. Still so much more to show. The build will have 2 of the Masteraccessory Tempered glass sided panels For the PSU for this build will be the CM MasterWatt Maker 1200 Not sure if this will have the power needed for the build ? Yer right lol I'm sure this beast would power every PC in my house. This monster also comes with plenty of cables and a here is a small video about it. Very cool. https://www.youtube.com/watch?v=s-GOKSdU8wI OK time to start turning this case into many parts. Front sound block out cover looks good and it works real well to stop most of the fan noise you get from the front of the case. on the inside it has sound dampening foam. Fan and LED controller is mounted to the back of the motherboard tray. now time to start removing more. This part takes a bit of effort to take of but pulling it out towards your self it should come off. it clips in at 4 points. now you can take a screw driver and remove the top bracket. top cover that also comes with a magnetic cover if you don't any top fans. Front grill dust cover.

    Cheers Stephen, Will have to catch up again one day soon.
  5. Guardians Of The Galaxy 2- But still Thinner :)

    Thank you Rakazone21
  6. Project: Sleeper

    No! please tell me you got it done in time.
  7. Guardians Of The Galaxy 2- But still Thinner :)

    Cheers Guys best of luck.
  8. Guardians Of The Galaxy 2- But still Thinner :)

    Quick Video of the build, it really need more takes but ran out of time. Hope you all like it.
  9. CMR1 motorcycle CASE (MAKER 5) 林廷諭

    That looks very cool! especially considering what you have used for materials, Very nicely done.
  10. "Chrono Master" - project

    And they look Sweet grate work mate.
  11. GEARS OF WAR 4

    All done, good luck everyone.
  12. Guardians Of The Galaxy 2- But still Thinner :)

    Dark photos That's all from me, Good luck everyone. Thanks again for stopping by.
  13. Guardians Of The Galaxy 2- But still Thinner :)

    My second Build for the Cooler Master World Series 2017 is Completed. New Video will follow in the next 2 days. and some more photos with all the RGB running coming soon. (BELOW I have to point it out,) Yes you are seeing it right. the rads are down in the back, The front and back brackets i made can be set up or down 8mm. It was set up the right way to start with. But the CPU had to be changed in a rush for a bios flash, I had to take the PC apart again to get the CPU out and to do that I needed to remove the rads, And being in a rush to get it all back together for photos. With it all hooked up again i seen it as well. But the screws to adjust the rads up and down are behind the Mobo. I just did not have the time to pull the case apart again to reset them. Thanks again for stopping by.
  14. Guardians Of The Galaxy 2- But still Thinner :)

    Just about done on the out side. Now has a gloss coat over the top and some custom color tint side panels. 23.5cm To 16.5cm
  15. Guardians Of The Galaxy 2- But still Thinner :)

    Dual 360 rads installed, Now working on the tubing.
  16. Guardians Of The Galaxy 2- But still Thinner :)

    Hi, The color I picked for the build is Harlequin. That will have the same colors as the guardians of the galaxy theme. It still needs to be clear coated as well.
  17. Guardians Of The Galaxy 2- But still Thinner :)

    Switchers fitted for a new clean look.
  18. Guardians Of The Galaxy 2- But still Thinner :)

    Outer plastic covers now done and a place for the CM badge.
  19. Guardians Of The Galaxy 2- But still Thinner :)

    Some more done and some new changes made. Thinner with a theme. More soon!
  20. Guardians Of The Galaxy 2- But still Thinner :)

    Time again to show some pic's. From one case to the next I have used the rear GPU mount from the Cosmos SE cut it out reshaped it to fit in the top of the frame to hold the GPU in place. Plus one new clear and black printed GPU logo, For some back light RBG.
  21. Guardians Of The Galaxy 2- But still Thinner :)

    Some of the very COOL hardware going into the Thinner case. MAXIMUS VIII HERO ALPHA MoBo W/block, From Bitspower. ASUS STRIX 980ti And Bitspower RBG W/Block.
  22. Project: Sleeper

    Nice one Craig, Build is looking good.
  23. Guardians Of The Galaxy 2- But still Thinner :)

    Update on the Thinner build, Case frame is now reshaped. The back of the case now has room for 2x360 rads for the cooling the GPU & CPU. And in side the MaterWatt Maker 1200 PSU. Still lots more to come and still lots more to do.
  24. Guardians Of The Galaxy 2- But still Thinner :)

    Hello Again So Far what i'm doing is im trying to reuse as many parts as I can from both cases. The MoBo tray has been centered in the case to have even room on both sides, The back side being for the cooling and cabling, Giving me 80mm at the back and 80mm on the MoBo side and a 160mm all up. More then enough space to get things done. Thanks again for stopping by.