Inony

Members
  • Content Count

    68
  • Joined

  • Last visited

  • Days Won

    2

Inony last won the day on October 16

Inony had the most liked content!

Community Reputation

12 Good

About Inony

  • Rank
    Member

Recent Profile Visitors

690 profile views
  1. Inony

    Leviathan

    Up until now, everything came out as designed. It may not be a hi-end pc because the hardware I received was donated form my friends but i hope you like the overview of the work. If you like it, I'm happy too.
  2. Inony

    Leviathan

    Thank you to FSP / CM thailand / Oreioncustom for supporting the PSU , fans and custom cable. I'm very happy.
  3. Inony

    Leviathan

    After installing the water cooling unit Brought everything together.I choose to use the water cooling kit as easily as I have. Some things may not look perfect, but I really have only this.
  4. Inony

    Leviathan

    From then, put everything together And connect the electric wires to the deepest point first
  5. Inony

    Leviathan

    I sprayed a light brush to create shadows. And paint along the lines with the brush
  6. Inony

    Leviathan

    After spraying the foundation To check the integrity of the skin before painting The storm also attacked my country. Flooding in some provinces. Last week, my house was raining every day . However, I will find a way to finish it. I'll update the work again once it's done.
  7. Inony

    Leviathan

    Before spraying and air brush I will test the ARGB lights at important points for orderliness. BASE HEAD As for the eyes, I use the resin printer It's OK ฺShark fins OMG !! I forgot skin care this piece. I'll do it later Side Fan Grill
  8. Inony

    Leviathan

    Up to this stage that I think all parts are ready to be painted and assembled I spent 821 hours in total print and I used 23 boxes of petg filament.
  9. Inony

    Leviathan

    After the worst moments have passed I'm ready for coloring But before that step Must try assembling some pieces to check strength first YEAHH !! Everything came out exactly the way it was drawn and it was strong.
  10. Inony

    Leviathan

    The next step is to scrub the skin smooth. It is a torture that must be done every piece. It's called karma hahaha. It was a long and difficult period. I take it with a sanding machine sanding. And followed by hand polishing with sandpaper number 200 // 400 respectively. At this stage, I didn't save the image. I'm sorry, because the dust is a lot. When the hands are stained, then I don't want to touch the mobile phone ฺBefore Through good skin care
  11. Inony

    Leviathan

    And then repeat with other parts but reduce 3d printer nozzle size to 0.6 // Shell Wall Thickness setting at 2.4 mm to reduce weight and time. The other difficult thing for me is cutting the support line. I use PETG Filament It will be print harder to PLA. But it's stronger And can be exposed to the sun for a long time to paint. To print PETG, your printer must be equipped with a hot end that can reach a temperature of at least 230°. Ideally, you'll want to be able to reach about 250°, but 235° may be sufficient for me It's a nightmare for me. I will survive, hey, hey Every 2-3 pieces, it will get a small wound regularly hahaha
  12. Inony

    Leviathan

    The next challenge was to print the main structure. And separated it from the support section I have to print as big as I can. Reduce connection points for strength Caused by the interlocking of the internal structure. I use 3d printer nozzle size 1.0 // Shell Wall Thickness setting at 5.0 mm // infill 50%
  13. Inony

    Leviathan

    I want to get an overview of more than robots. I want Cybrog design to show some of the main structures. Including wiring at some point It is therefore a difficult task. Elder must design the complex internal structure for realistic look. Even though it was just a sculpture computer but I try to design to make the overall picture the most gentle. Main structure Various hardware locations