knud

Moderator
  • Content Count

    4,591
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by knud

  1. knud

    AM4 Socket Support

    No, that cooler will not get the AM4 bracket More details here: http://www.coolermaster.com/amd-am4-ryzen-compatability/en/
  2. I bought mine on aliexpress, those are from acrylic. But you can buy them from different vendors/shops and different materials
  3. That is a very nice build You are running with 3x intake on the front I assume? Can I recommend some cable combs to finish the build? (there are various materials & sizes to choose from)
  4. Reading out PSU voltages from software is never 100% accurate. If you have a voltmeter, you could use that to measure the 12v line. 11.6v is a bit low, it is well within the 5% margin that is allowed and the PSU will work as intended.
  5. You are planning to buy the MasterCase Pro 5, right? As Mohd mentioned, on our CM store (links in my signature) we already have lots of accessories and more are coming soon. As for the LED strip... now it is single color. But.. we will have something better later this summer.
  6. It won't help now, but did this only happen with the letter "A", or any of the keys? if the latter, it means your repeat rate is set to x4 or x8.
  7. Just, to make sure, you tried these 2 options: Option 1: unlug the keyboard press FN+Right Alt replug the keyboard back in (while keeping FN+Right Alt pressed) This option should make the keyboard go back to factory settings/demo mode. Option 2: keep the keyboard plugged in to the PC Press FN+E for about 3 to 5 seconds This option will clear the keyboards onboard memory And, does the same behaviour happen at another pc, after doing these 2 resets?
  8. Well, a simple solution is a seperate/standalone power switch, like this one: http://www.cmstore.eu/parts-replacements/others/cables/power-switch/ Very cheap and it works just as well.
  9. This sounds like a pre-build PC by Gateway? Can you take a picture of the cooler - because we have no reference here. Thank you.
  10. The end result looks very nice. And the video helps to further appreciate the mod
  11. You can mount a 360mm rad in the front, but you need to remove the ODD bay in order to do so. Also note, not all 12 screws can be used to secure the radiator.
  12. If you can touch the SSD and it feels normal, i really doubt it is 50+ degrees Celsius. Perhaps the firmware gives wrong data. Is there a firmware update available for your SSD?
  13. To start off: the chassis body is the same for the entire MasterCase 5 series. That means, the same frame & same material (metal). The differences are partly on the included accessories and partly on the outside design. You can upgrade from the MasterCase 5 to any of the other models listed below. Or you can downgrade, if you wish to do so. You can buy accessories in our CM store. (links in my signature) An overview: http://www.coolermaster.com/case/mid-tower/mastercase-pro-5/
  14. You can use them with Aura sync. If you want to control 3 of them, you need to get a splitter. (which is not included)
  15. What temps do you get on your CPU and GPU while gaming? Your SSD temp is really high... If you try another monitor program, does it yield the same result? If you use your hands to feel the temp.. does it feel hot? (please be careful)
  16. knud

    TPS-L2

    Very good job Sir Had to look twice to really see the scale of that walkman
  17. It should start with "SGK.." Can you try that?
  18. Europe will get stock around april 20th.
  19. You can get a bracket from CM directly. Please create a ticket to request one. (Contact details in my signature)
  20. knud

    The Old Book

    okay, that looks very cool and unique. What thermal results do you (roughly) get?
  21. The sound that you hear, is that more an electrical noise? (Coil whine) If so, it could indicate some unfortunate "sound" compatibility with a graphics card for example. If not, it can "just" be a faulty unit. This can happen with piratically any product. I'm not trying to justify a broken unit, but all I'm saying is: this can happen, unfortunately. If you need any other help, please create a ticket, like Mohd suggested as well. Thank you.
  22. Just to make sure: did you remove the plastic seal from the heatsink? (Yes, I did forget this too once or twice in the past) And it is, indeed measured in celcius?
  23. Sorry to inform you that this cooler will not get an AM4 upgrade bracket.
  24. Despite your feelings of this product, please try to keep it civil. Thank you. And as Mohd mentioned, are you able and willing to share some pictures? Of course, a manufacturing defect can occur, but under normal circumstances, it can be replaced under warranty or DOA.