• Announcements

    • xtian1

      Win a trip to Computex 2017   03/21/2017

      Get a chance to be with us and experience one of the biggest trade shows in the Industry in Taiwan with us! Check the announcements section for details on how to enter the contest.
    • CM Nick

      AM4 Socket Support   04/24/2017

      Due to technical issues, the topic on "AM4 Socket Support" has disappeared. We apologize for any inconvenience this has caused and we are trying our best to have this topic back up as soon as possible.   As we read in the topic, there is a lot of discussion going on when the new brackets will be arriving. We can tell you now that the brackets will be ready for pre-order on our CM Store EU tomorrow and will be ready for shipment around the 16th of May.   You can continue the discussion in this newly created topic:     

Bob Lindall

  • Content count

  • Joined

  • Last visited

  • Days Won


Bob Lindall last won the day on April 17

Bob Lindall had the most liked content!

Community Reputation

4 Neutral

About Bob Lindall

  • Rank
  1. Sorry, my video link did not work in the last update. It is now updated... and posted here, as well! My Buddy's son enjoying the system
  2. Indeed. Thanks!
  3. 4-23-2017 Update! Almost done. I've had an insane schedule at work, recently, so progress has been slow. It will be finished my the May 3rd deadline... but, it may not be everything that I wanted it to be. Of course... I have a ridiculous week ahead of me, this week, having to work out of town for a few days and having a few more, really long days! Here we go: The process of the getting the component area enclosed. Painting the exterior. Working on the cabling. Mapping out and cutting the intake portions and floor board. And how it currently looks. I think, I'm going to go with a two-tone color scheme for this. And... for a special treat, a good buddy of mine decided to stop by with his son. To say the least... I think he likes it! https://www.facebook.com/no.other.bob/videos/10154576658538526/
  4. I am in awe of the polish and finish of that frame! Gorgeous work!
  5. I will be applying the first coat of paint, this Saturday or Sunday. I may stencil in some of the logos from the components that I had used in the making of the case. Soon... very soon... this will be complete!
  6. Ha! That's the second Se7en reference to my case, this week! Too funny.
  7. I have no problems with the close quarters. It's actually, roomier than it looks. My roommate, who is 6' 4", doesn't have any issues, either. Speakers are ok, for right now. That reflective material doesn't help, but that's why I plan on putting a Microfiber cover over all of those surfaces. That should sufficiently deaden the reverb caused by the interior. As for VR, maybe in the future. I'm not a huge fan of it at the moment, due to issues with vertigo and not being able to focus well on the screens inside the goggles. Thanks, however!
  8. Here is the updated picture of the back of the box, as it currently is, plus a couple of "for scale" pictures.
  9. 4-12-2017 Update! Finished up the MOST of the outer paneling. Now, it's just a matter of getting the interior finished up, along with re-working a bit of the wiring and the last of the fans. I still have to put in the final back panel, as well, that will have the last of the exhaust fans. It's nearly there! Paneling for the nose section: I know, that front door panel is a little wavy, but that will get fixed. The back, so far: From the side. Yes, I will have to fill in the gap at the top, as well. And what it's all for! Me, enjoying the system! I decided to play a little H1Z1 King of the Kill, with a couple of friends. And everything is working great!!! Thanks for tunin' in!
  10. 4-11-2017 Update! It's getting closer to being finished! Both doors are completely covered. I just have to work on covering the silver portion of the insulation with thin carpeting. The back portion of the floor board is finally in. Although, I will still need to make the necessary cuts for Fan Ports. All but the sides of the front nose paneling have been cut and are in place. Da Photos: Cutting the holes for the fans on the doors. The cutting of the floorboard. Half of the back paneling and how the current look of the back of the system. Even with some of the paneling missing, the system does an excellent job of mitigating the sound from bleeding out and getting in. So far, with only 3 fans in operation (I blew out one of the circuits on my fan controller a while ago) the system stays relatively cool on the inside. I spent an hour or two in the system yesterday and played in it around noon, while it was a warm day. There were no apparent issues with overheating. More to come, very soon!
  11. 4-8-2017 Update: I've managed to sneak in a few hours here and there, outside of my insane work hours as of late. Here is the progress. I have most of the insulation and outer paneling cut and in place. The insulation will get a thin coat of carpeting, so it's rather reflective at the moment, but will not be so when it is complete. Other than cutting a few more exterior panels, I just have a bit more cable routing to deal with and then sealing the component tray and getting the fans installed and routed in that area, as well. Enough talk, here are the pictures!
  12. It did. Thank you. I had been planning something like this for a while and had drawn up some basic plans. It wasn't until I came across the materials for the cage, that I decided to begin the project. And then, as luck would have it, I found out about this contest and found that I was within the criteria to join. So it's given me the drive to finish it sooner than what I had initially thought it would take. That... and being kicked out of my home in the next month, is also driving me to finish quicker... so... there's that, as well.
  13. Thanks! That is part of the idea.
  14. Short update for 4-4-2017 Because of some snafus at work and putting in more than 120 hours in at work, for the last two weeks, I have not had much time to work on anything. I'm hoping to focus a bit more of my time toward this in the coming days. So this will just a quick showing of what I will be using to skin the frame. All panels will be velcroed onto the frame to make for easy removal. I promise to have some bigger updates very soon. Since I will HAVE to... because the deadline is looming... for both my project AND having to move to another home. Thanks!
  15. Stunningly excellent woodworking there, good sir. I have looked over every picture thus far, with complete admiration. That is a fantastic creation and I cannot wait to see the final product!