KINIKOS12

Members
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

2 Neutral

About KINIKOS12

  • Rank
    LED Head
  1. Yes you Can! 1. Remove the botom antidust mesh 2. Turn the case upside down 3. Mound the Radiator Under the chassis with the hoses of the cooler towards the middle of the case. They have just enough clearance from the Rim. 4. Cut the antidust nesh to fit two openings for the hoses and drill 8 Holes to fit the Fan assembly holes (I used the Radiator as a basic frame of reference) 5. Mount the supplied Fans, encapsulating the antidust mesh between the Fans Chassis and Radiator (Install One and then turn the case on its feet again and then install the other) using Guards to blow air into the case. 6. I used the ATX B configuration for the MB with the rear Fan Blowing Air Into the case 7. With this configuration the Corsair LOGO is visible 8. Optional: you can cut a mesh the size of the radiator and fit underneath it to further prevent dust from entering the Case. Hope i helped You