• Content Count

  • Joined

  • Last visited

Posts posted by KeiDnaval

  1. You have two different reading from the two apps, AMD-OD is reading 53.5c while HWMonitor is reading 66c Current - 53 min - 72 Max

    What AMD OD is showing is thermal margin (sorry it's in french in the pic), so the temp are the same in both app

    "One tip i might have for you, if you can have a fan blow front to back over the pump and VRMs toward the exhausts fan it might bring the temps down a little, sometimes the Motherboards VRMs can transfer heat to the CPU. with conventional air cooler its fan usually does that job, AIO coolers of course don't have fans there" 

    I'll do that when i get a new fan, thanks for the tip

    On load i get I took the screen after 5 min on load

  2. Is it clamped down properly? the bracket holes on these coolers can hook on to the stud thread ends so when you screw it down it feels tight and at the end of the threads but really the bracket its self is in the way so its not actually tight ontop of the CPU.


    Yeah i had what you are saying about the stud, i figure this out when i first screw it, they are all tight ontop of the cpu, but still the same temps :/




    I found some review regarding the seidon 120v for you reference


    i know what you mention is ver2 and below is seidon 120v only but atleast you can know what is going on


    both cooler also same but the seidon 120v ver2 is more better than seidon 120v


    so my suggestion try recheck you installation 




    Temperature Benchmarks - AMD




    The Seidon 120V was very impressive for a budget liquid cooler here, keeping the 7850K at only 40 C at a full load. The Hyper 212 EVO was right behind it at just 41 C at load.  The stock cooler’s temps are not particularly impressive, as one might expect, but not bad – though the benefit of aftermarket cooling can clearly be seen here with the 13-14 degree decrease in temps with the Cooler Master offerings.




    With the overclocked workload the Seidon 120V again leads the 212 EVO by just 1 degree C, and both coolers saw temps rise by 10 C over stock clocks. Excellent considering that 1.4V was required to keep this 4.40GHz overclock stable. The stock AMD cooler managed to keep the overclocked APU from overheating, but at 65 C it was pushing a lot of warm air down against the power delivery and memory on the motherboard.

    I never had these extremely low temp with the stock cooler, right now i'm rechecking the installation, everything is well screwed, i think the fan is in the right direction to blow the air out of the case, all the fan are spinning

    Can it come from my cpu itself? 

  3. Hello everyone,

    i'm sorry if my english is in somewhat wrong ;)

    I buy a Seidon 120v ver2 and at idle my temp a pretty high...

    i did what mohd noh did for is setup : put the fan on system fan header and the pump on cpu fan header


    My spec are :

    Case : Zalman Z11 Hf1
    CPU: Amd A10-7850k
    Mobo : MSI A88X-g45
    PSU: Cooler Master B700
    GPU: ASUS Radeon HD 7870 ( i know it can be bottleneck by the cpu but i wont change any of the cpu or gpu ;) )
    RAM : 12Go 1333mhz ( kingston but just took it from an old acer pc, i will change it by real one, one day :P )


    My old AirCooling ( Raijintek Pallas ) Gave almost exactly the same temp wich is quite strange for water cooling, even for an entry AIO

    i hope you can help me to figure out what is the problem, thanks