Leaderboard


Popular Content

Showing content with the highest reputation on 09/18/2019 in all areas

  1. 1 point
    " DESERT RAT " This is the first time I am seriously participating in an international competition. Have also participated in competitions in several forums, but not done as seriously as this CMWS. The theme I use in the "Desert Rat" case is "Military Scifi". but you are free to translate it according to your own perspective. In each work that I make, I try a lot of ideas, and try to use many kinds of materials. For some circumstances, I am very interested in using acrylic or PVC sheet material in making PC modifications. One of my characteristics in PC modification is to manipulate 2D material into a 3D shape. Maybe there are still many shortcomings and require a lot of effort and criticism to improve my work. But it's ok, I accept it gracefully. Behind all this, I want to motivate many talented PC modders in my country. because, "There is never a competency that is not tested in a competition". Thank you in advance to many who have helped me in many ways. Thank you to CoolerMaster for giving me the opportunity in this prestigious competition Take the theme of the human struggle against heat in the desert. just as a PC fights heat from itself. The CoolerMaster product that I use: 1. MasterBox Lite 3.1 | MCW-L3B3-KANN-01 2. Tempered Glass for MasterBox Lite 3.1 | MCA-B300C-TGSP00-LGT 3. MasterFan MF120R ARGB | R4-120R-20PC-R1 x2 4. MasterLiquid ML120R ARGB | MLX-D12M-A20PC-R1 5. V650 | RS650-AFBAG1-EU 6. ARGB Splitter Cable | MFX-AWHN-3NNN1-R1 The hardware that I use in this project are: > MSI A320 PRO2-M2 > AMD Athlon 200GE > Transcend 4gb DDR4 > Samsung 256gb V-NAND NVME SSD > MSI GTX 1050 gaming X 2GB MasterBox Lite 3.1 | MCW-L3B3-KANN-01 Begin to release accessories on the casing I just took the frame as additional information, I don't use a 3D printer in this project. All the details that I made, using acrylic sheet materials with varying thicknesses, acrylic cylinders, and PETG tubing remaining pieces collect some details and match the size of the initial stages for the next worklog can be seen in the next column
  2. 1 point
    hi guys and here is another little update, i have clad a lot of the frame with worbla andmust get some more tomorrow.i can only start placing everything inside when i know which cage holes will be open and which closed so lets get this done first. its gonna be tight getting this all ready for the CMWS2019 deadline.
  3. 1 point
    great ornaments, especially the gears... awesome
  4. 1 point
    Ohhh so gliterry!! Can't wait to see the final cm logo distro :):)
  5. 1 point
  6. 1 point
    Looking good bro! Keep up the good work
  7. 1 point
    Mantap kang... nice detailing
  8. 1 point
  9. 1 point
    17: QUICK OVERVIEW / PREPARATIONS FOR MAKING CABLES Pretty much done planning the entire water cooling loop and it's time to make some cables. But first an overview showing parts and angles that will be harder to view when fully assembled. With a small case packed with jummy hardware, custom parts and details it's good to have a proper breakdown showing everything. Monoblock and parallell acrylic hard tubes viewed from above with the top radiator not in place. And yes, tubes will be cleaned, fittings perfectly aligned etc. before final assembly A good view of the tubes and my rear mounted fill port. This will allow me to top up the system without taking side panels off. Majestic Corsair Dominator RGB! Getting ready to start measuring for cables and choosing the best paths. I love how rough everything looks with the protective film still on. Makes the moment of reveal so much better when it's finally ready to be removed. The last time I'll see it this empty! It looks kind of roomy on the inside but with everything in there will be approx 10 mm spacing between parts
  10. 1 point
    Next up, I was working on the wings. Started by sanding down all the flat surfaces. To recreate the sharp edges on the lines, I used a needle file. This step was necessary to make all gaps the same size. Then all parts of the wings were glued together. Again, I used short steel rods to make the connection really strong. This will be needed later for the moving mechanism, cause I am not trusting glue alone. In addition, I included a ribbon cable for the LEDs. Better to do it now, cause later would be a bit tricky to get the cable all the way through. After I filled some smaller gaps, all 4 wings got one quick wet sanding. And then dry before the next step. A layer of spray filler was applied to see were some more spots needs additional attention.
  11. 1 point
    a modder doesn't think about the warranty of an item, so do it if it can make it better. upgrade 120mm radiator to 280mm for better performance and appearance.
  12. 1 point
    A quick look at the first tubing mock-up. I thought I would do something less intricate with the loop this time but I just can't help it, I love parallel runs Made the bracket for the PSU mounting in the top section I reshaped the two back panels with this characteristic cut I'm bringing along this whole project, to make it smoother and more geometric Also began working on the front and top panels cutouts, I made this simple design in Silhouette Studio, cut the stencil and went over it with a pen once I applied it to the panel, this way all the sections in both panels will be exactly the same. It would've been hard doing it by hand since they're very irregular shapes. Obviously cut with my trusty scrollsaw And as anticipated in the previous post, I swapped the red LEDs of the lightbox with WRGB strips
  13. 1 point
  14. 1 point
    10: CUSTOM WATER COOLING PARTS Custom CM logo shaped acrylic pump top in the making! I designed this to fit D5 pumps and with the flexibility to use different mounting brackets and orientations. Custom CM logo shaped acrylic reservoir to go with the D5 pump top. Features 3 ports and the same mounting abilities as the pump top. One of many tributes to 10th CMWS that's going into this project!
  15. 1 point
    aamiin insyaalloh
  16. 1 point
    printing more needed stuff... spacers psu mounting the whole lower hardware-slider mainboard plate fan holders (although i changed them to 2x 80mm with a slot for ssd) wheels and of course as you might have noticed, the frames got painted (lots of times, making the best of many mistakes...haha) also was able to put it all together for a nice preview.