Leaderboard


Popular Content

Showing content with the highest reputation since 04/10/2019 in all areas

  1. 2 points
    I have a X299 Gigabyte Aorus Ultra gaming pro on the cooler master webpage its advertised as the led on the case can be controlled by the motherboard On the case there is a 3 pin connection with the word gigabyte but im unable to control the led lights via my motherboard gigabyte web page has this: RGB FUSION support Digital LED and RGBW Light Strips From Cooler Master webpage: I/O Port - Fans/LightingFan Speed Control Button, ARGB Control Button I also own the Corsair RGB eco system with a commander pro ect ect Anyway I can control the lights on the case with the corsair software? I want to change the case light strips with white, but i cannot control the case lights other than using the default functions via the case button
  2. 1 point
    Hello, I did purchase the CM mm520 which is supposed to be an update of the CM storm mouse series. Unfortunately ,the shape is really disappointing/awfull if we compared with the previous version of spawn,xornet,xornet ii. I will ask to refund the mm520 Please CM,could you do a Xornet III with the same shape as previous version? Most people who bought previous CM storm mouse which the same thing,make a xornet III with unchange shape ,a comeback! Currently,i didnt find the xornet II with an affordable price. Is it discontinued?
  3. 1 point
    Thats weird. When my old controller broke they've sent me the old version again so probably it's got something to do with the new controller PCB layout.
  4. 1 point
    So the title pretty much says it all - I consider Cooler Master Inferno to be one of the best mice even by today's standards. Sure it might be a little dated with a 4000DPI sensor and lack of proper RGB, but it has something that no other mouse in the world has - excellent symmetrical placement of 11 buttons combined with support for a lot of customization thanks to the "Storm Tactics Multiplier key" and easily accessible profile switch button (can't believe I'm marketing a CM mouse back to CM :P). This makes the mouse into a multimedia powerhouse without the need to place more than 3 buttons under the thumb. I'd love to see an updated version of Inferno hit the market one day. My couple of ideas: Leave the button placement as is. The way each button on top has a counterpart (symmetry) creates some good mapping opportunities. For example I have set up Storm Tactics (let's call it ST for short) + left click to be browser tab to the left, ST + right click is browser tab to the right ST + right quick fire key is close tab while ST + left quick fire key is restore recently closed tab. On another profile I have multimedia control set up - ST + left quick fire - volume down, ST + right quick fire - volume up, ST + MMB - mute sound and right quick fire is just space (for stopping and starting playback). For even more functionality the scroll button could also click to the left and right - that's two extra buttons without changing the overall mouse layout, Obviously update the sensor (don't get me wrong, it's a very good sensor but 4000DPI might not be enough for some people and some high resolution displays nowadays), Add proper RGB this time around, I would like to see support for more than just 3 profiles and a couple of scripts, I don't know how good the PC software for your newest mice is, but the one for Inferno while usable has some weird quirks and is overly complicated and unintuitive - it might discourage some people. Leave the DPI setting indicator - I love it! Add replacable weights for even more customization! I wanted to write to you (CM) about this for a long time actually - I'm still using an Inferno that I bought 7 years ago (it's my second one actually) and I'm afraid that when it breaks I'll lose a lot of functionality because Infernos are impossible to find anymore and no other mouse has what it has. And also having an updated version with even better functionality would be a godsend.
  5. 1 point
    Bought this mouse recently and I love the feel of it, however I cannot install the software so that I can customize the mouse ad turn of the annoying lights or at least a less obnoxious setting. Please Help !!!!
  6. 1 point
    Eager to play Andromeda Mass Effect? Cooler Master will award 10 lucky winners with PC game codes and 2 peripherals on April 11th. Participate in the giveaway here
  7. 1 point
    Hi! we always leave a bit of room (around 1mm) for additional clearance so the MA410M will fit without issues in the MB530P
  8. 1 point
    I have an MSI b450 tomahawk and purchased a 3 fan kit of mf120r argb fans. Upon opening the fan kit, I noticed the connector from the kit for 4 fan headers (label says msi/asus/asrock connector) has a 2nd pin slot that is null (no opening), but my board has all 4 pins present on the board. This means it is unusable on the board. Is there another adapter or something in the kit I am missing?
  9. 1 point
    Hello guys, I'm building my ultimate PC RIG and, obviously, I couldn't do that without CoolerMaster Components! I just bought (1 week ago) a CoolerMaster Mastercase H500M PC Case and I also bought one of the latest MSI Motherboards (MSI Z390 ACE). I know that both the PC Case and the MoBo support ARGB. My H500M has an internal ARGB Controller (screwed to a side panel) but since I want to sync the H500M Fan Lights with MSI Mystic Light (so that my FANS, MoBO, RAM, PSU and SSD are all syncronized in terms of RGB Lights), I would like to know how to proper set the wire connections up. So far I have connected the ARGB Fans from the H500M to the H500M Controller and then I connected the Controller to my JRAINBOW Connection on the Motherboard. Will this be enough to let the Motherboard control the Lights? Or do I need to connect the fans directly to my MoBo? Also I'm planning on buying a CPU RGB Watercooler. I noticed that the H500M RGB Controller has two inputs. One is being used for the RGB Fans as I mentioned above, can I use the other input for the CPU WaterCooler? Thank you very much for your help, you guys rock! Joao Pereira
  10. 1 point
    I would like to know what A-RGB 140mm exhaust fan that connects with the A-RGB controller included in the H-500M case?. My plan is to replace the stock 140mm black exhaust fan. Anyone help please....
  11. 1 point
    Thanks bro big save wish this software was was in the box on small CD drive or on their front pages easy access, think its being phased out for Master Plus, yea Master Plus needs alot of work still hope they get it working soon
  12. 1 point
    Are you using the correct sofware? There is the Cooler Master LED Controller software and there is the MasterPlus Beta Software. The LED Controller software has the mirage stuff on it and what you want to use. https://coolermaster.egnyte.com/dl/Z4xAkaxEXA
  13. 1 point
    Hello, This is what I've done. I received a replacement part yesterday by mail. Very reactive support ! Thanks a lot.
  14. 1 point
    Tell them u want all parts replaced. They sent it to me one by one so it took over a month :D.... It is not complicated but if u get ur faulty parts one by one like me u have to Always waste a lot of time in cable manament and stuff.
  15. 1 point
    Open a Ticket (took 2 days for me to get a answer). Had the same Problem u need a new top, front and a new pcb. Seems u got two old models. They changed a lot
  16. 1 point
    You can use the glass panel from C700P case: https://www.cmstore.eu/case/dual-curved-tempered-glass-side-panel-for-cosmos-c700p/. I've asked them in 2018 the same question and they said it would fit. If you need proof I can post a screenshot from my e-mail or you could contact them directly at: shop@coolermaster.eu .
  17. 1 point
  18. 1 point
    Hi Paul, These are available on our CM store EU 3,5: https://www.cmstore.eu/spare-parts/n300-n400-force-500-toolless-3-5-fasteners-sold-per-1/ 2,5 & 5,25: https://www.cmstore.eu/spare-parts/n300-n400-toolless-2-5-5-25-fasteners-sold-per-1/
  19. 1 point
    A very BIG THANK YOU for your great support, I've received three new fans for my cooler in just one week!!! I have already installed them on my system and everything is QUIET and COOL!!! Thank you very much!!!
  20. 1 point
    Here you go. Manual.zip
  21. 1 point
    Hey Michiel, thanks for the reply. I figured as such but I couldn't find any other option for submitting my problem. I didn't receive any e-mail stating the reason of the reject. Per your instructions I submitted a support ticket on your CM fanzone... I hope I will find a solution there, Thanks!
  22. 1 point
    I still have the original paper manual so if you still need it I can scan it for you.
  23. 1 point
    has anyone solved this problem? I think coolermaster should do something, we spent a lot for this case! it can happen that a product has a defect but the company has to do something to solve, I have done some research on google and there are so many people with this problem! the case coolermaster cosmos c700m has problems with the leds and the automatic speed of the fans ..
  24. 1 point
    Hello, not sure if you solved your issue or not, but I just went through similar issues with a new H500m and the MSI Gaming Pro Carbon Motherboard. I did eventually get the front fans to be connected in the Mystic Light software. The case should come with a 3-1 fan splitter already connected and that plugs into a normal fan header on the MB to run the fans. The two RGB cables from the fans get combined into the RGB controller. To get it to work with MSI Mystic Light, I connected the front panel reset switch to the controller, the micro-usb cable to a usb 2.0 header on the MB, the aRGB output cable to JRAINBOW on the MB, and the SATA power cable from my power supply. If that's all connected, open up Mystic Light and select JRAINBOW. Set it to Steady and pick a unique color that stands out. Now, use the reset button to cycle through the rgb controller pre-sets until you find the steady color you picked. Now you've selected the JRAINBOW channel and anything you set to it in ML will show on the front fans. Hope this helps ~Von
  25. 1 point
    Hello, same problem here I have 4 BROKEN xornet 2 mouses, all of thm have scroll wheel broken, unfortunaly i've bought mm 520 aswell, and it feels much cheaper and unnecessarily large (i've also removed the weight inside, cause it was too heavy), i've tried g102 but it's too long and not wide enough. Nothing i've found comes close to xornet, either they are much heavier or look like xornet but scaled in size which is not good for me. Funnily enough my hand is very large, but i only move my wrist, i'm really hoping they'll refresh it properly
  26. 1 point
    The fan controller and the fans connected in there dont't work.. help me...
  27. 1 point
    Hey, did u buy MB511 or MB511 RGB? And can you tell me what cables are coming out of the fans? Was some splitter included? Thank you
  28. 1 point
    I'm in the same boat - zero response to my ticket, never mind getting an RMA started. 650w PS was DOA. I've gone out and bought another brand PS. Also I just returned a CM case and fans I had also purchased out of principal. Never again will I deal with CM. Lesson learned - wish I had checked their own forums first.
  29. 1 point
    you need to download the masterplus instead of the rgb software. ARGB BOX Firmware v1.0.0.1
  30. 1 point
    I'm having the same issue. Purchased a 3pk of RGB 120mm fans with a controller. One of the fans has red and green reversed.
  31. 1 point
    Good Morning! I have a Cooler Master Cosmos S, but I can not connect the front connectors. I have doubts with this 3-pin connector, I do not know what its function. Somebody help me!! please?
  32. 1 point
    Hey everyone, Just wanted to write up a review of the MasterMouse MM520 after having used it for a day. I've previously owned the CM Spawn and Xornet II so as soon as the MM520 launched, it was a no brainer for me to order it right away. I heard how some folks that are diehard fans of the Spawn/Xornet might not be so sure about the changes for the MM520, so I wanted to just provide my thoughts on it (as a diehard Spawn/Xornet fan myself.) Shape/Size: (1st Place: Spawn/Xornet II | 2nd Place: MM520) Obviously, the biggest change is the shape and size of the MM520. I took a picture with my phone of the Spawn, Xornet II and MM520, side-by-side to give you guys a rough comparison -- take a look below and see for yourself. As you can see, it's a little bit longer in the left/right mouse button area than the Spawn/Xornet. It took a little bit of getting used to coming from years of using the Spawn/Xornet but what I noticed is that I can pretty much hold it the same way as the Spawn/Xornet as I used to and it feels more or less the same. However, now for those of you with bigger hands and/or longer fingers, you'll have more space to choose where you want to rest your fingertips. Also, with the increase in length I find that depending on how I hold the MM520, the back of it touches my palm which I'm still getting used to. (I think it's also because the groove on the left-side of the mouse for the thumb is a little deeper). With the Spawn/Xornet, I primarily used Claw + Fingertip grip, so the back of the mouse hardly ever touched my palm (that was just my preference; it helped me to do insane flick shots ). The last thing related to the length is that the positioning of the scroll wheel is a little bit further than I'm used to. Previously, with the Spawn/Xornet, my finger would touch the top-half of the scroll wheel to turn it; now it touches the bottom-half. Overall, this is not too hard to get used to. I'd say the second point above about the MM520 touching my palm is the most noticeable change. Weight: (1st Place: Xornet II | 2nd Place: Spawn | 3rd Place: MM520*) According to the specs of all three mice, the weights are: (without the USB cable) http://www.coolermaster.com/peripheral/mice/spawn/ (90g) http://www.coolermaster.com/peripheral/mice/xornet-ii/ (80g) http://www.coolermaster.com/peripheral/mice/mastermouse-mm520/ (101g) I definitely noticed the increase in weight. It didn't affect my aim as much, but it was noticeable. For insanely fast flick shots, a lighter mouse will always be better (it's physics!) * Fortunately, I found a YouTube video that shows how we can remove the internal 12g weight. I think after I remove that, the weight will be perfect. Sensor: (1st Place: MM520 | 2nd Place: Xornet II | 3rd Place: Spawn) Awesome choice on the sensor CoolerMaster. It's just perfect. Don't think things can get any better than this. Texture and Feel: (1st Place: Spawn | 2nd Place Tie: Xornet II and MM520) To be honest, I kinda miss the all-rubberized feel of the Spawn. That was perfect in my opinion. However, with the MM520, I can see the benefits of the new material -- it's no-slip plastic and doesn't seem to attract sweat/oil. I guess I'll find out over time. To those of you who love the rubberized grip feel, rejoice in the fact that the MM520 at least has that on the right side of the mouse for your pinky. I feel like the left-side of the mouse would've benefited from having the same rubberized texture as well (like the Xornet II). Buttons/Scroll Wheel: (1st Place: MM520 | 2nd Place: Xornet II | 3rd Place: Spawn) The MM520 has larger left/right mouse buttons and side buttons. Same tactile feel as the Xornet II. The scroll wheel is better than the Spawn/Xornet II (better grip, smoother scrolling, slightly bigger.) The only minus is there's only one DPI button now (used for TactiX which can act like a SHIFT key for all the buttons). It would've been nice to have two DPI buttons like on the Spawn/Xornet II. Software: Better than the Xornet II/Spawn software for sure. However, the LED editing UI needs a bit of work. It's a little confusing when editing each LED zone. It'd be nice to have some tooltips/help guide to figure out what each setting means. It's also not clear if I can set the LED lights for each DPI setting/profile. I've somehow managed to configure it so that as I cycle between DPIs, the scroll wheel changes color to indicate the DPI setting, and after a few seconds, it goes to the LED settings in the software. I can't figure out how to change the different DPI indicator colors though; seems to be hard-coded as Red, Light Purple, Blue then Green. The only other gripe I have about the MM520 software is that it takes a few seconds to save the profile after I click Apply. But fortunately, I only have to setup my mouse once. TL;DR -- Should you get this or not? Yes! If you previously loved the Spawn/Xornet line of mice and have medium/large hands or long fingers, you'll have an easy time switching to the MM520. However, if you have small hands and felt that the Spawn/Xornet was the perfect size already, then the MM520 might not be for you. If you made it this far, thanks for reading the review and hope it helps! Suggestions to CoolerMaster: For newer versions of the MM520, here's some stuff I'd like to see in the future: 1) Shape/Size: Overall, I think a mouse that has a shape/size somewhere between the Spawn/Xornet II and the current MM520 would be perfect (at least for me ). However, I think if CoolerMaster did what Zowie did for their ZA line of mice by offering different sizes (e.g., ZA11 - Large Size, ZA12 - Medium Size, ZA13 - Small Size), they can appeal to essentially every Claw/Fingertip gamer. Please make it happen CoolerMaster -- you guys are on track to having the perfect claw/fingertip mouse! 2) Weight: I think that by offering different sizes with the same shape like mentioned above could potentially solve this. For newer versions of the MM520, maybe an easier way of adding/removing the weights would help. For now, I think just including replacement feet would be enough for us diehard fans 3) Texture: Bring back a rubberized version like the old Spawn! I'll pay extra for it. 4) Software: I'd really like to be able to customize the LEDs (all the zones) for each DPI setting and profile! Kinda like what was there for the Xornet II. I'm not sure if I'm doing something wrong with the software right now (like if that functionality exists and I'm just dumb) or it's not supported. Either way, the UI could use some work.
  33. 1 point
    salutes I open this topic because in the forum I have not found anything on this product, I wanted to know if the COSMOS II CONTROL PANEL is compatible with the cosmos s, thanks
  34. 1 point
    I just got my Masterkeys S, and while I'm finding it to be a delightful keyboard to type on, it seems to me like the macro feature could use some improvement. The main issue I have with the macro feature is that I can't bind macros to key combinations, like Fn+M or something. If I could, this would even make the Fn key so much more useful, since I could have macros all over my keyboard. As it is right now, there are only a couple of keys on the keyboard that I might consider sacrificing for macros. The other issue with the macro feature is that the macro is always played back at the same speed I recorded it, which means that I can't get the benefit of having the macro type something for me faster than I can do it myself. It can only ever go as fast as I can. I would really like to hear from CoolerMaster whether these changes would be something you could address in a firmware update. If not, I hope you consider my input for future devices.
  35. 1 point
    Wow, thats a great review you have done there, very detailed! Weight feedback we already made actions towards, we will offer those feet in the box with new batches As for the software, depending on the mode you can select the zones seperatly already... Texture: really? Almost everyone else seem to not like rubberized and prefer this new PBT direction we are going for. Care to explain a bit more why you prefer this?
  36. 1 point
    Hi there, You can request your extra mouse feet with our support department over at https://account.coolermaster.com/ Nice to see you are such a fan of the Xornet/Spawn and now MM520 -family
  37. 1 point
    Well I have Managed To Install The Coolermaster Master Air 8 CPU Cooler In CM 690 III Its perfectly installed in my CM 690 III as i was worried that it wont fit becouse cooler is big 172mm and on CM site it was given that CM 690III supports max of 171MM height CPU cooler But its fit even there is still more gap after closing the side panel like was using H100I previously now i got this monster and i am really impressed really... My I5 4670K Overclocked @4.4Ghz and max Temp after running prime 95 for 10 Min it wont exceed 60'C and my ambient Temp are 35'C+ i am from India Newdelhi and its summer time very hot and humid Here Are the Pictures
  38. 1 point
    Have you tried the following? Reset:unlug the keyboard press FN+Right Alt replug the keyboard back in (while keeping FN+Right Alt pressed) Clear onboard memory:keep the keyboard plugged in to the PC Press FN+E for about 3 to 5 seconds Does the same happen when connected to another PC/Laptop? And are you using USB 2.0 or USB 3.0 ports?