Leaderboard


Popular Content

Showing content with the highest reputation since 01/11/2019 in all areas

  1. 2 points
    Hey, what kind of sound do you hear?
  2. 2 points
    I have pointed down psu's fan and it's fine. And u should connect fans to the splitter and splitter to the desk to some SYS_FAN. With MB530P is included just splitter to the psu, not to mobo so you should buy if you wanna control it.
  3. 2 points
    Hey, lol, I have exactly same prob with exact components.. and u should connect it to ARGB header, not RGB. But I did it and it didnt help me... Idk what to do.
  4. 2 points
    I WORKED IT OUT!!! I have the CM ML120 with only one fan connected but this will work if you are using two. I should've done some research because the advertising on the box said Aura Sync, and I would assume it was illegal to advertise such things if it weren't available. I followed all the instructions that was given in the manual, plug cables into AIO header and CPU header, plug the other pump cable into the controller, plug the fans into the splitter which plugs into the controller, then i had to power the bloody thing too and figured out why it didn't work. then with a little research, the thought process was I had to plug SOMETHING into the RGB header on the motherboard... but the question was what! then after a little bit of playing around with different cables (including the 4 pin cable) plugging in and out of the controller it donned on me.... I needed a splitter that connected the pump and fans, and plug that directly into the RGB header on the motherboard. and then Bobs your uncle. Aura sync works instantly!!! So just to reiterate what I have done. Coolermaster supply a 3 way splitter, which you plug the female plugs from the pump and fan(s) into using the Male-Male adapters. Then simply plug the single female end into the 3pin RGB port on your motherboard.
  5. 1 point
    I have a X299 Gigabyte Aorus Ultra gaming pro on the cooler master webpage its advertised as the led on the case can be controlled by the motherboard On the case there is a 3 pin connection with the word gigabyte but im unable to control the led lights via my motherboard gigabyte web page has this: RGB FUSION support Digital LED and RGBW Light Strips From Cooler Master webpage: I/O Port - Fans/LightingFan Speed Control Button, ARGB Control Button I also own the Corsair RGB eco system with a commander pro ect ect Anyway I can control the lights on the case with the corsair software? I want to change the case light strips with white, but i cannot control the case lights other than using the default functions via the case button
  6. 1 point
    Thanks to CM Michiel. Useful tip.
  7. 1 point
    Hi coolermaster, my name is Daniel from Singapore. My fist computer was built was in your N series N200 windowed it has lasted thru the 5 years beautifully. Now I'm going to upgrade my Haswell system to a Ryzen system and I plan to do it in one of your smallest cases, I got my hands on your classic Elite 110s (mesh front) via newegg.sg I hope you will launch an updated version of the elite 110, here are a few things you could improve on : A finer mesh for the front (with rgb power button). Mesh filters for exhaust/intake points. Extended length for gpu with twin fans. Move the store side plate on gpu side to opposite side. Thank you
  8. 1 point
    I was wondering if I could fix the terrible airflow without sacrificing too much of the looks of the MasterBox Lite 5, by replacing the front panel of the Lite 5 with the front panel of the MasterBox MB511. Would it fit without issues? Thanks!
  9. 1 point
    does anyone have the firmware they can upload all the links to cooler master dont work
  10. 1 point
    alot of idiots (like me) who are new to pc building bought this case forgetting to think about airflow. i just want to know if there are front panels that will fit my case with better airflow. thanks in advance
  11. 1 point
    I can confirm this; airflow is appalling. How about making a simple mesh front panel?
  12. 1 point
    I second this. Would like to have an answer.
  13. 1 point
    Hello guys, I'm building my ultimate PC RIG and, obviously, I couldn't do that without CoolerMaster Components! I just bought (1 week ago) a CoolerMaster Mastercase H500M PC Case and I also bought one of the latest MSI Motherboards (MSI Z390 ACE). I know that both the PC Case and the MoBo support ARGB. My H500M has an internal ARGB Controller (screwed to a side panel) but since I want to sync the H500M Fan Lights with MSI Mystic Light (so that my FANS, MoBO, RAM, PSU and SSD are all syncronized in terms of RGB Lights), I would like to know how to proper set the wire connections up. So far I have connected the ARGB Fans from the H500M to the H500M Controller and then I connected the Controller to my JRAINBOW Connection on the Motherboard. Will this be enough to let the Motherboard control the Lights? Or do I need to connect the fans directly to my MoBo? Also I'm planning on buying a CPU RGB Watercooler. I noticed that the H500M RGB Controller has two inputs. One is being used for the RGB Fans as I mentioned above, can I use the other input for the CPU WaterCooler? Thank you very much for your help, you guys rock! Joao Pereira
  14. 1 point
    My liquid cooler sounded bubbly, less so than yours, and I just assumed it was normal. Now I'm RMA'ing because of pump failure so I'm really curious how coolermaster responds to you.
  15. 1 point
    Hello there, You should check if your psu still has warranty. G650M has 5 year guarantee after buying if you have the receipt. If you don't have the receipt you can use the serial number(it shows when did psu got manufactured) of psu to check for guarantee. If your psu is eligible for RMA you can send it for replacement or repair for free. (You only need to cover shipping cost.) https://account.coolermaster.com/LogOn.aspx sign in in here. Go to my product then register your product. After that just follow instructions. But before doing all of this make sure your PSU is the problem. If you don't have a guarantee you can try a local repair shop.
  16. 1 point
    I also created a account to say thank you! I ripped my computer to pieces, rebuilt and reinstalled it. For this. Although I never experienced any anomalies typeing. But playing CS:GO with this repeat-rate-madness, aw my gaaaawd!
  17. 1 point
    so a ARGB controller will not work you need something like this http://www.coolermaster.com/cooling/cooling-rgb-accessories/rgb-led-controller/ its a rgb controller you need
  18. 1 point
    Update: The SATA power cable coming from the front panel looked bigger than normal to me and it didn't occur to me to attach it to the PSU via a SATA power supply cable. This cable is indeed the same that you use for a HDD. I simply connected this cable to the PSU and the power button light lit up. You then just simply take the 3x1 RGB splitter cable, hook it to all the fans and then there is one similar cable left coming from the front control panel. Attach the end of your 3x1 RGB splitter cable to this remaining cable and your fans should fully work. The fans spinning action is totally separate from the power required for the RGB. I feel like an idiot because I originally missed that SATA power supply cable and had no idea where it was supposed to go, but in the end I'm very happy with my purchase. This case looks awesome in person, especially now that it's finally working as it should. Lol : ) The directions that came with it really could be much better. Original post: I am having the same exact problem. I do not have a RGB header on my mobo, but was under the impression that I could still control the RGB fans by the button on the front panel. Not to mention, it says that an RGB controller is included, which I'm assuming is built in on the front panel because I did not receive a separate RGB controller. Having an RGB controller would mean that I should not need an RGB header..... just power to the RGB components....correct? Sorry I'm kind of a newbie.
  19. 1 point
    I, sadly, also have created an account just to say thank you. I was trying to figure out how the "FN" things worked, and I pressed 4X thinking it would make the colors move faster...
  20. 1 point
    Now Jan 5th 2019. No fans, no support! Guess Gold333 is correct, should buy from a respectable company.
  21. 1 point
    I connected the mini USB to my USB port and this showed up: And the controller is unable to change the colors of the fan through the software Sad, because the manual said "download fan software" from the website.... Feeling cheated...
  22. 1 point
    I'm in the same boat - zero response to my ticket, never mind getting an RMA started. 650w PS was DOA. I've gone out and bought another brand PS. Also I just returned a CM case and fans I had also purchased out of principal. Never again will I deal with CM. Lesson learned - wish I had checked their own forums first.
  23. 1 point
    HI!, is there any place where I can get the fans for the V8 GTS?, or should I buy a new one? (P.S.) I'm from Mexico, hope someone can help thanks in advance!
  24. 1 point
    I am shocked nobody responded to you. To answer your 1st question about USB 3.1 and 3.0 - the Cosmo C700P comes with a USB 3.1 connection wire as you discovered but it's a little ahead of it's time so the particular motherboard you have does not have a USB 3.1 header so you're not going to plug that cable into anything unless you upgrade your motherboard that has a 3.1 header. 3.1 connections exist in the back on the i/o ports. ASMedia® USB 3.1 Gen 2 controller : 1 x USB 3.1 Gen 2 port(s) (1 at back panel, teal blue, Type-A, Support 3A power output) ASMedia® USB 3.1 Gen 2 controller : 1 x USB 3.1 Gen 2 port(s) (1 at back panel, , USB Type-CTM, Support 3A power output) Source: https://www.asus.com/us/Motherboards/PRIME-Z370-A/specifications/ For question 3 , this is where you get your lighting and fan control speeds from. The manual could be better but basically it's identifying your sata power connectors, fan connectors and lighting connectors. I don't know a better way to explain that. Sorry it's a late response , hope it helps.
  25. 1 point
    you need to download the masterplus instead of the rgb software. ARGB BOX Firmware v1.0.0.1
  26. 1 point
    I purchased this today as it's listed on Asus own website that its Aura sync compatible. After slogging through the TERRIBLE manual (come on Coolermaster!), i found hours later despite numerous tries that no, it is not compatible with Aura. The Aura plugin is visible when you download the software from CM, but it's greyed out for me. EDIT: Figured it out and got it to sync with Asus Aura - the ML240 needs to have the CM software installed to enable Asus Aura (although the AURA & AURORA plugins are still unaccessible from the software.) I detached the controller and just used the 3in1 aRGB cable, plugged that into the aRGB of the Z370-F, opened both CM & Aura apps, and it synced.
  27. 1 point
    Seeing as no one has answered this I will. NO! it's not compatible with Aura. You cannot plug the ML240/120R fan or pump LEDs into the RGB header on an ASUS MB. The Aura compatible badge on the box is a scam to get you to buy it. How do I know? Well, I have been through two ML240R's. First ones LED's died within a week. Now the replacement controller box has died and I'm waiting for Coolermaster to answer my support ticket. I only bought this watercooler cause I thought it was compatible with my ASUS Aura M/B. BTW: I have 30 years of PC experience.
  28. 1 point
    Wish I saw these posts before I ordered one. It's April 2018, no trays available anywhere.
  29. 1 point
    Received this bundle today and had the same input problem. After watching a few youtube reviews I came across one video where the girl mentioned the repeat rate, F9 and F10. Once I loaded up a game I confirmed that THAT was the problem. The 8x repeat rate messes with the directional inputs. Setting it back to the standard 1x (FN+F9) fixed it right there. I could even switch between the two to make sure that it was the culprit. I hope this helps anyone who is having this problem! =)