Leaderboard


Popular Content

Showing content with the highest reputation since 01/11/2019 in all areas

  1. 2 points
    I have a X299 Gigabyte Aorus Ultra gaming pro on the cooler master webpage its advertised as the led on the case can be controlled by the motherboard On the case there is a 3 pin connection with the word gigabyte but im unable to control the led lights via my motherboard gigabyte web page has this: RGB FUSION support Digital LED and RGBW Light Strips From Cooler Master webpage: I/O Port - Fans/LightingFan Speed Control Button, ARGB Control Button I also own the Corsair RGB eco system with a commander pro ect ect Anyway I can control the lights on the case with the corsair software? I want to change the case light strips with white, but i cannot control the case lights other than using the default functions via the case button
  2. 2 points
    Hello guys, I'm building my ultimate PC RIG and, obviously, I couldn't do that without CoolerMaster Components! I just bought (1 week ago) a CoolerMaster Mastercase H500M PC Case and I also bought one of the latest MSI Motherboards (MSI Z390 ACE). I know that both the PC Case and the MoBo support ARGB. My H500M has an internal ARGB Controller (screwed to a side panel) but since I want to sync the H500M Fan Lights with MSI Mystic Light (so that my FANS, MoBO, RAM, PSU and SSD are all syncronized in terms of RGB Lights), I would like to know how to proper set the wire connections up. So far I have connected the ARGB Fans from the H500M to the H500M Controller and then I connected the Controller to my JRAINBOW Connection on the Motherboard. Will this be enough to let the Motherboard control the Lights? Or do I need to connect the fans directly to my MoBo? Also I'm planning on buying a CPU RGB Watercooler. I noticed that the H500M RGB Controller has two inputs. One is being used for the RGB Fans as I mentioned above, can I use the other input for the CPU WaterCooler? Thank you very much for your help, you guys rock! Joao Pereira
  3. 2 points
    Hey, what kind of sound do you hear?
  4. 2 points
    I have pointed down psu's fan and it's fine. And u should connect fans to the splitter and splitter to the desk to some SYS_FAN. With MB530P is included just splitter to the psu, not to mobo so you should buy if you wanna control it.
  5. 2 points
    Hey, lol, I have exactly same prob with exact components.. and u should connect it to ARGB header, not RGB. But I did it and it didnt help me... Idk what to do.
  6. 2 points
    I WORKED IT OUT!!! I have the CM ML120 with only one fan connected but this will work if you are using two. I should've done some research because the advertising on the box said Aura Sync, and I would assume it was illegal to advertise such things if it weren't available. I followed all the instructions that was given in the manual, plug cables into AIO header and CPU header, plug the other pump cable into the controller, plug the fans into the splitter which plugs into the controller, then i had to power the bloody thing too and figured out why it didn't work. then with a little research, the thought process was I had to plug SOMETHING into the RGB header on the motherboard... but the question was what! then after a little bit of playing around with different cables (including the 4 pin cable) plugging in and out of the controller it donned on me.... I needed a splitter that connected the pump and fans, and plug that directly into the RGB header on the motherboard. and then Bobs your uncle. Aura sync works instantly!!! So just to reiterate what I have done. Coolermaster supply a 3 way splitter, which you plug the female plugs from the pump and fan(s) into using the Male-Male adapters. Then simply plug the single female end into the 3pin RGB port on your motherboard.
  7. 1 point
    So the title pretty much says it all - I consider Cooler Master Inferno to be one of the best mice even by today's standards. Sure it might be a little dated with a 4000DPI sensor and lack of proper RGB, but it has something that no other mouse in the world has - excellent symmetrical placement of 11 buttons combined with support for a lot of customization thanks to the "Storm Tactics Multiplier key" and easily accessible profile switch button (can't believe I'm marketing a CM mouse back to CM :P). This makes the mouse into a multimedia powerhouse without the need to place more than 3 buttons under the thumb. I'd love to see an updated version of Inferno hit the market one day. My couple of ideas: Leave the button placement as is. The way each button on top has a counterpart (symmetry) creates some good mapping opportunities. For example I have set up Storm Tactics (let's call it ST for short) + left click to be browser tab to the left, ST + right click is browser tab to the right ST + right quick fire key is close tab while ST + left quick fire key is restore recently closed tab. On another profile I have multimedia control set up - ST + left quick fire - volume down, ST + right quick fire - volume up, ST + MMB - mute sound and right quick fire is just space (for stopping and starting playback). For even more functionality the scroll button could also click to the left and right - that's two extra buttons without changing the overall mouse layout, Obviously update the sensor (don't get me wrong, it's a very good sensor but 4000DPI might not be enough for some people and some high resolution displays nowadays), Add proper RGB this time around, I would like to see support for more than just 3 profiles and a couple of scripts, I don't know how good the PC software for your newest mice is, but the one for Inferno while usable has some weird quirks and is overly complicated and unintuitive - it might discourage some people. Leave the DPI setting indicator - I love it! Add replacable weights for even more customization! I wanted to write to you (CM) about this for a long time actually - I'm still using an Inferno that I bought 7 years ago (it's my second one actually) and I'm afraid that when it breaks I'll lose a lot of functionality because Infernos are impossible to find anymore and no other mouse has what it has. And also having an updated version with even better functionality would be a godsend.
  8. 1 point
    Bought this mouse recently and I love the feel of it, however I cannot install the software so that I can customize the mouse ad turn of the annoying lights or at least a less obnoxious setting. Please Help !!!!
  9. 1 point
    Eager to play Andromeda Mass Effect? Cooler Master will award 10 lucky winners with PC game codes and 2 peripherals on April 11th. Participate in the giveaway here
  10. 1 point
    Hi! we always leave a bit of room (around 1mm) for additional clearance so the MA410M will fit without issues in the MB530P
  11. 1 point
    I would like to know what A-RGB 140mm exhaust fan that connects with the A-RGB controller included in the H-500M case?. My plan is to replace the stock 140mm black exhaust fan. Anyone help please....
  12. 1 point
    Thanks bro big save wish this software was was in the box on small CD drive or on their front pages easy access, think its being phased out for Master Plus, yea Master Plus needs alot of work still hope they get it working soon
  13. 1 point
    Are you using the correct sofware? There is the Cooler Master LED Controller software and there is the MasterPlus Beta Software. The LED Controller software has the mirage stuff on it and what you want to use. https://coolermaster.egnyte.com/dl/Z4xAkaxEXA
  14. 1 point
    Hello, This is what I've done. I received a replacement part yesterday by mail. Very reactive support ! Thanks a lot.
  15. 1 point
    Tell them u want all parts replaced. They sent it to me one by one so it took over a month :D.... It is not complicated but if u get ur faulty parts one by one like me u have to Always waste a lot of time in cable manament and stuff.
  16. 1 point
    Open a Ticket (took 2 days for me to get a answer). Had the same Problem u need a new top, front and a new pcb. Seems u got two old models. They changed a lot
  17. 1 point
    You can use the glass panel from C700P case: https://www.cmstore.eu/case/dual-curved-tempered-glass-side-panel-for-cosmos-c700p/. I've asked them in 2018 the same question and they said it would fit. If you need proof I can post a screenshot from my e-mail or you could contact them directly at: shop@coolermaster.eu .
  18. 1 point
  19. 1 point
    Hi Paul, These are available on our CM store EU 3,5: https://www.cmstore.eu/spare-parts/n300-n400-force-500-toolless-3-5-fasteners-sold-per-1/ 2,5 & 5,25: https://www.cmstore.eu/spare-parts/n300-n400-toolless-2-5-5-25-fasteners-sold-per-1/
  20. 1 point
    A very BIG THANK YOU for your great support, I've received three new fans for my cooler in just one week!!! I have already installed them on my system and everything is QUIET and COOL!!! Thank you very much!!!
  21. 1 point
    Here you go. Manual.zip
  22. 1 point
    Hey Michiel, thanks for the reply. I figured as such but I couldn't find any other option for submitting my problem. I didn't receive any e-mail stating the reason of the reject. Per your instructions I submitted a support ticket on your CM fanzone... I hope I will find a solution there, Thanks!
  23. 1 point
    I still have the original paper manual so if you still need it I can scan it for you.
  24. 1 point
    has anyone solved this problem? I think coolermaster should do something, we spent a lot for this case! it can happen that a product has a defect but the company has to do something to solve, I have done some research on google and there are so many people with this problem! the case coolermaster cosmos c700m has problems with the leds and the automatic speed of the fans ..
  25. 1 point
    Hello, not sure if you solved your issue or not, but I just went through similar issues with a new H500m and the MSI Gaming Pro Carbon Motherboard. I did eventually get the front fans to be connected in the Mystic Light software. The case should come with a 3-1 fan splitter already connected and that plugs into a normal fan header on the MB to run the fans. The two RGB cables from the fans get combined into the RGB controller. To get it to work with MSI Mystic Light, I connected the front panel reset switch to the controller, the micro-usb cable to a usb 2.0 header on the MB, the aRGB output cable to JRAINBOW on the MB, and the SATA power cable from my power supply. If that's all connected, open up Mystic Light and select JRAINBOW. Set it to Steady and pick a unique color that stands out. Now, use the reset button to cycle through the rgb controller pre-sets until you find the steady color you picked. Now you've selected the JRAINBOW channel and anything you set to it in ML will show on the front fans. Hope this helps ~Von
  26. 1 point
    Hello, same problem here I have 4 BROKEN xornet 2 mouses, all of thm have scroll wheel broken, unfortunaly i've bought mm 520 aswell, and it feels much cheaper and unnecessarily large (i've also removed the weight inside, cause it was too heavy), i've tried g102 but it's too long and not wide enough. Nothing i've found comes close to xornet, either they are much heavier or look like xornet but scaled in size which is not good for me. Funnily enough my hand is very large, but i only move my wrist, i'm really hoping they'll refresh it properly
  27. 1 point
    The fan controller and the fans connected in there dont't work.. help me...
  28. 1 point
    Hi coolermaster, my name is Daniel from Singapore. My fist computer was built was in your N series N200 windowed it has lasted thru the 5 years beautifully. Now I'm going to upgrade my Haswell system to a Ryzen system and I plan to do it in one of your smallest cases, I got my hands on your classic Elite 110s (mesh front) via newegg.sg I hope you will launch an updated version of the elite 110, here are a few things you could improve on : A finer mesh for the front (with rgb power button). Mesh filters for exhaust/intake points. Extended length for gpu with twin fans. Move the store side plate on gpu side to opposite side. Thank you
  29. 1 point
    I was wondering if I could fix the terrible airflow without sacrificing too much of the looks of the MasterBox Lite 5, by replacing the front panel of the Lite 5 with the front panel of the MasterBox MB511. Would it fit without issues? Thanks!
  30. 1 point
    alot of idiots (like me) who are new to pc building bought this case forgetting to think about airflow. i just want to know if there are front panels that will fit my case with better airflow. thanks in advance
  31. 1 point
    I can confirm this; airflow is appalling. How about making a simple mesh front panel?
  32. 1 point
    My liquid cooler sounded bubbly, less so than yours, and I just assumed it was normal. Now I'm RMA'ing because of pump failure so I'm really curious how coolermaster responds to you.
  33. 1 point
    Hello there, You should check if your psu still has warranty. G650M has 5 year guarantee after buying if you have the receipt. If you don't have the receipt you can use the serial number(it shows when did psu got manufactured) of psu to check for guarantee. If your psu is eligible for RMA you can send it for replacement or repair for free. (You only need to cover shipping cost.) https://account.coolermaster.com/LogOn.aspx sign in in here. Go to my product then register your product. After that just follow instructions. But before doing all of this make sure your PSU is the problem. If you don't have a guarantee you can try a local repair shop.
  34. 1 point
    I also created a account to say thank you! I ripped my computer to pieces, rebuilt and reinstalled it. For this. Although I never experienced any anomalies typeing. But playing CS:GO with this repeat-rate-madness, aw my gaaaawd!
  35. 1 point
    so a ARGB controller will not work you need something like this http://www.coolermaster.com/cooling/cooling-rgb-accessories/rgb-led-controller/ its a rgb controller you need
  36. 1 point
    Hey, did u buy MB511 or MB511 RGB? And can you tell me what cables are coming out of the fans? Was some splitter included? Thank you
  37. 1 point
    Update: The SATA power cable coming from the front panel looked bigger than normal to me and it didn't occur to me to attach it to the PSU via a SATA power supply cable. This cable is indeed the same that you use for a HDD. I simply connected this cable to the PSU and the power button light lit up. You then just simply take the 3x1 RGB splitter cable, hook it to all the fans and then there is one similar cable left coming from the front control panel. Attach the end of your 3x1 RGB splitter cable to this remaining cable and your fans should fully work. The fans spinning action is totally separate from the power required for the RGB. I feel like an idiot because I originally missed that SATA power supply cable and had no idea where it was supposed to go, but in the end I'm very happy with my purchase. This case looks awesome in person, especially now that it's finally working as it should. Lol : ) The directions that came with it really could be much better. Original post: I am having the same exact problem. I do not have a RGB header on my mobo, but was under the impression that I could still control the RGB fans by the button on the front panel. Not to mention, it says that an RGB controller is included, which I'm assuming is built in on the front panel because I did not receive a separate RGB controller. Having an RGB controller would mean that I should not need an RGB header..... just power to the RGB components....correct? Sorry I'm kind of a newbie.
  38. 1 point
    Now Jan 5th 2019. No fans, no support! Guess Gold333 is correct, should buy from a respectable company.
  39. 1 point
    I connected the mini USB to my USB port and this showed up: And the controller is unable to change the colors of the fan through the software Sad, because the manual said "download fan software" from the website.... Feeling cheated...
  40. 1 point
    HI!, is there any place where I can get the fans for the V8 GTS?, or should I buy a new one? (P.S.) I'm from Mexico, hope someone can help thanks in advance!
  41. 1 point
    you need to download the masterplus instead of the rgb software. ARGB BOX Firmware v1.0.0.1
  42. 1 point
    I'm having the same issue. Purchased a 3pk of RGB 120mm fans with a controller. One of the fans has red and green reversed.
  43. 1 point
    I purchased this today as it's listed on Asus own website that its Aura sync compatible. After slogging through the TERRIBLE manual (come on Coolermaster!), i found hours later despite numerous tries that no, it is not compatible with Aura. The Aura plugin is visible when you download the software from CM, but it's greyed out for me. EDIT: Figured it out and got it to sync with Asus Aura - the ML240 needs to have the CM software installed to enable Asus Aura (although the AURA & AURORA plugins are still unaccessible from the software.) I detached the controller and just used the 3in1 aRGB cable, plugged that into the aRGB of the Z370-F, opened both CM & Aura apps, and it synced.
  44. 1 point
    Good Morning! I have a Cooler Master Cosmos S, but I can not connect the front connectors. I have doubts with this 3-pin connector, I do not know what its function. Somebody help me!! please?
  45. 1 point
    Wish I saw these posts before I ordered one. It's April 2018, no trays available anywhere.
  46. 1 point
    salutes I open this topic because in the forum I have not found anything on this product, I wanted to know if the COSMOS II CONTROL PANEL is compatible with the cosmos s, thanks
  47. 1 point
    I just got my Masterkeys S, and while I'm finding it to be a delightful keyboard to type on, it seems to me like the macro feature could use some improvement. The main issue I have with the macro feature is that I can't bind macros to key combinations, like Fn+M or something. If I could, this would even make the Fn key so much more useful, since I could have macros all over my keyboard. As it is right now, there are only a couple of keys on the keyboard that I might consider sacrificing for macros. The other issue with the macro feature is that the macro is always played back at the same speed I recorded it, which means that I can't get the benefit of having the macro type something for me faster than I can do it myself. It can only ever go as fast as I can. I would really like to hear from CoolerMaster whether these changes would be something you could address in a firmware update. If not, I hope you consider my input for future devices.
  48. 1 point
    Well I have Managed To Install The Coolermaster Master Air 8 CPU Cooler In CM 690 III Its perfectly installed in my CM 690 III as i was worried that it wont fit becouse cooler is big 172mm and on CM site it was given that CM 690III supports max of 171MM height CPU cooler But its fit even there is still more gap after closing the side panel like was using H100I previously now i got this monster and i am really impressed really... My I5 4670K Overclocked @4.4Ghz and max Temp after running prime 95 for 10 Min it wont exceed 60'C and my ambient Temp are 35'C+ i am from India Newdelhi and its summer time very hot and humid Here Are the Pictures
  49. 1 point
    Have you tried the following? Reset:unlug the keyboard press FN+Right Alt replug the keyboard back in (while keeping FN+Right Alt pressed) Clear onboard memory:keep the keyboard plugged in to the PC Press FN+E for about 3 to 5 seconds Does the same happen when connected to another PC/Laptop? And are you using USB 2.0 or USB 3.0 ports?
  50. 1 point
    Received this bundle today and had the same input problem. After watching a few youtube reviews I came across one video where the girl mentioned the repeat rate, F9 and F10. Once I loaded up a game I confirmed that THAT was the problem. The 8x repeat rate messes with the directional inputs. Setting it back to the standard 1x (FN+F9) fixed it right there. I could even switch between the two to make sure that it was the culprit. I hope this helps anyone who is having this problem! =)