Leaderboard


Popular Content

Showing content with the highest reputation since 11/11/2016 in all areas

  1. 5 points
    Oy! This mod is something that I've been wanting to build for some time. It is a tribute to the cooler master ammo 533 case. The project is going to be an evolution from the Ammo series, both from an engineering and design standpoint. Personally I have been part of the Mekatronix Works (mktrx) case-mod team. We've previously participated in a number of regional events, in the last couple of years. Before that it was mostly custom watercooling and jerry-rigging our cases to fit the components. I am going to be using a similar HW monitor display system, in-build into the case as one of our previous projects "Tek'tonic III" (link below) The previous builds I have worked at were more of an abstract design and served no purpose in utility. With this competition I have the chance to build my system into something that will feed the nostalgia of my lanparty days. The materials I will be using: Aluminium, Plexi, Dibond and Carbon fiber reinforced ABS. previous builds: Tek'tonic Tek'tonic III Rog COOPER
  2. 5 points
    Good afternoon friends! I would like to present my project under the name of Alien who i started doing on 9.02.2017.This is my first project but i think it should turn out interestingly. The first steps of the project were to create a sculpture. MUCH WORK WILL STILL BE EXECUTED IN THE PROCESS OF CREATION.
  3. 5 points
    Work on the project is boiling, new details are added. There will be dynamics settings, as well as a led matrix Lg will be installed.
  4. 5 points
    All parts are smeared, polished and adjusted to each other.
  5. 5 points
    Good afternoon I add new details of the project, I made a tank for the water cooling system, it is a glass vessel with an internal channel made in the form of a spiral. Initially it was about 30cm in length, so I had to reduce it. Now it turned out 16cm in length. There was a lot of work , As the glass is badly cut and cracked, it is very but it all ended well.
  6. 5 points
  7. 5 points
    Thank you. There are still a lot of work to be done, many mistakes I make for the first time. I hope everything will work out. If you have any questions, please contact me. I will be glad to share my experience.
  8. 4 points
    Hi guys! I´m new here! My name´s Jaqueline (Jack for short) and I´m part of CM Modding Team. Today I wanted to show you my first casemod project on the Scratch category, but first I´d like to thank some brands that believed in my work and that decided to be my partners on this project, like Cooler Master, Gigabyte. Cooler Master, Gigabyte The case I´m gonna use is a Cooler Master Elite 110 Watercooler Seidon 120 V Hardware: HyperX Savage DDR4 16GB Cpu i5 6600k SSD VGA: MOBO: The project is inspired by the Magic: The Gathering Kaladesh trailer, specifically the Filigree Familiar, an artifact fox-like creature. Some steps of the building proccess... Lots of EVA and styrofoam... Lots of freehand drawings... Lots of sleepless nights... It´s a real puzzle, don´t you think? And when the molds work out, I get trully happy... The EVA runs rings around me! I´ll post more step-by-step pictures and videos soon! Hi darlings, let´s continue with the project? At this moment I´m cutting some acrylic molds and it turned out to be really hard work! But let´s focus, we´re getting to the painting and finishing steps. I finally got the time and I edited this video with a small part of the casemod process I hope you like it .... I'm back, with one more step in the project, I would like to thank everyone who is following the posts !! :clap: Cut time... I will use these mesh and acrylic for the finishing of the structure Eyes of the project... With patience and hard work I´ll get there. Structure mounted and glued still missing some minor repairs and paints. I hope you like the result :clap::clap::clap: Time to place the screens on the casemod structure Final results after glueing and drying Returning to work carving rest of parts in eva... :rock: Last test of the EVA parts before starting the painting and the finishing acrylics ... Painting moment I want to work with aging pieces .. Preparing the cutting of acrylics Modeling the acrylics on the fox's head With much patience we are giving life to the cabinet Thermal blower is life Hello my friends come show the completion of the head of my project I hope, soon I will publish all his photos ...
  9. 4 points
    Hi guys, I'm thinking about to to release the tool I develop last year for MasterKey RGB profile, since CM currently have no plan to update software related to custom RGB profile. So I thought it will be a good idea to release the tool I build for people who want to create they own lighting effect but have no idea how to deal with C++ SDK. The tool itself is still being the same state as last year(not polished, and some function are be not implement). It current support static, dynamic, reactive effect. Reactive effect's position, scale, color tone can react to keypress, number of key pressed, variable(CPU/GPU temperature, CSGO Health/Armor for now). Work on MasterKey Pro S/M(which I own). Need some feedback from you guys to determine should I continue the development or not. short video demo: https://www.youtube.com/watch?v=37_T1PFwTq8
  10. 4 points
    Hi, I continue to work the parts, then all connections will be glued and plastered.
  11. 4 points
    This post was initially reserved for the final submission shots, that time has now come. I give you MKTRX Ammo 315, the ultimate lan-party rig:
  12. 4 points
    Hi Friends, Almost all parts of the model were made and removed from the matrix. After that, grinding is required and giving some parts a more embossed shape.
  13. 4 points
    I plan to make a small retractable jaw, that it would come out of the mouth, like in the movie.I made a small jaw but it was too small, so I had to redo it. The pull-out mechanism for the jaw is expected to recover from the old dvd of the player.
  14. 4 points
  15. 3 points
    Hi my name is Joe ----------------------------------------------------------------------------------------------- This year, I entered the contest with the concept called "Wheel of the stars" The concept of this project : I mentioned on the visibility want to see the work of happiness. So I designed that happiness with the shape of the swings of amusement park then mixed with the mood of the Stream Punk. As per my concept ; When we are happy, it's can happebed anytimes , anywhere. I put a signal's concept By design, the moon-swings like a night and sun-swing like daytime. The tip's for this year I added the technique of install a wireless devices. Moreover, there 're adding new innovations for further development to create a variety of works in the future. ----------------------------------------------------------------------------------------------- Special Thank For Support JIB Thailand ----------------------------------------------------------------------------------------------- Finish Concept Design ----------------------------------------------------------------------------------------------- Hardware ----------------------------------------------------------------------------------------------- Mechanical parts ----------------------------------------------------------------------------------------------- CNC Cutting ----------------------------------------------------------------------------------------------- MOON ----------------------------------------------------------------------------------------------- MOON Stand ----------------------------------------------------------------------------------------------- SUN ----------------------------------------------------------------------------------------------- MOON&SUN ----------------------------------------------------------------------------------------------- Start coloring -----------------------------------------------------------------------------------------------
  16. 3 points
    Проект "Мастерская Паровая ракета" "безумный Гусь" Загруженные Изображения
  17. 3 points
    Quick update with some sketches that I've been working on for the past few days. I've eyeballed most of the measurements, some adjustments may be necessary. The first attachment shows the external, left-hand side of the build. I'll be fabricating this from aluminium composite materials (3rd pic) tomorrow. It's usually a bad ideea to build this from the outside in, but hey that's what sketches are for. Queue some hardcore dremel action. Second attachment is a rockin' pulley transmission system. Bit of a headache to design, but just wait and see it in action! None of the components, that I ordered, have made it through shipping yet, so it's all fabricobbling until the easter bunny hops around.
  18. 3 points
    Hello friends! Decided to make changes in the design and add ventilation windows, for blowing out warm air.
  19. 3 points
    Parts were purchased
  20. 3 points
    Hello friends! I will present several photos so you can see the whole process of the work done, removing the matrix.
  21. 3 points
    Hello friends decided to put a little pictures of the work done over the past week. Matrixes made of fiberglass, with epoxy resin, were made. There are a lot of work done, but in front there is not less.
  22. 3 points
    The very materials that originally bought for the project
  23. 3 points
    I GOT IT!!!! FINALLY!! The support didn't help, just told me to return it (as always) which was not an option as I bought it in Bangkok and live in Australia. Anyway, there was another thread on this and the guy said he just waited. Well I have waited 2 months at least with nothing, when randomly, when my PC was turned off, the lights went red. I turned on my PC in hope but the lights turned off. I pressed right click and DPI but nothing happened. Then, in a last shot of desperation I pressed the DPI and the scroll wheel when the lights finally turned on to pulse mode. I then followed the instructions in the manual to change it to static cyan just how I like it. Now, for the red lights to appear I had to plug the mouse into the 'always getting power USB port' on my motherboard, so that when the PC was off the mouse was receiving power but no data. Most laptops and decent desktops have this port. It can usually be identified by a Lightning bolt next to the usb port. Hopefully this helps someone.
  24. 2 points
    PROJECT PV2 by Paulo Reis Aka EVILPT WORKLOG About Myself First of all I will introduce myself my name is Paul I'm 36years old and live in Portugal "Sintra" I am computer technician and as was expected love modding. I hope you enjoy the PROJECT PIPELINE V2 "PV2" Design Concept The project PV2 After several incentives and support I was led to do Version 2.0 of the Pipeline Project. Then the whole project goes back from the crystalline and open structure with an EL 110v cable lighting and a giant watercooling system made by me with full support from Alphacool. The water besides walking through the conventional tubes still walks inside the 32mm acrylic structure of the PV2. I always found this type of structure fascinate and different I hope you like it as much as I liked doing this project. Best Regards and good luck too all. Portugal Mod Squad. Tks To All.. Sponsors Very Happy to Announce my Sponsors COOLER MASTER PORTUGAL TKS Sofia!! ALPHACOOL - AQUATUNING.DE TKS EDDY!! AVEXIR TKS Peggy!! AND ALL AVEXIR TEAM Materials to be used in the design of this Project PV2 Material to be used in the design of this Project Acrylic Ex Cristal Tube 32mm Acrylic water tube 16mm ALPHACOOL Fittings 16mm ALPHACOOL Reservoirs 250mm with Pump DC5 ALPHACOOL Sleeving Cable By Paulo Reis and PHOBYA 6 Fan Connector PHOBYA PVC Water tube 32mm Grill Mesh Spray "Black Mate" Spray "Black Textured" EL Wire LED Strip Aluminum Tube 10mm *Silicon tube 3mm and 4mm Wire 0.22 Soldering iron Station by VELLEMAN Hardware Motherboard: MSI Board "NOT Sponsor" Avexir DDR4: 16GB Quadchannel Blue Led Raiden Effect Avexir SSD S100 Blue Effect CMaster: JetFlows 120 Blue CMaster: Power supply V650 M GPU: ATI HD7870XT Watercooled CPU Intel 1151: I7 6700k LET´S START WORKLOG PHOTOS p FINAL PHOTO PROJECT PV2 BY PAULO REIS AKA EVILPT VIDEO OF THE PROJECT PV2 "ON" PV2 Video HOPE YOU LIKE THE PROJECT TKS TO ALL SPONSORS, FRIENDS AND MY FAMILY FACEBOOK: https://www.facebook.com/PauloReisakaEvilPT INSTAGRAM: https://www.instagram.com/evilpt/ TWITTER: https://twitter.com/evil_pt
  25. 2 points
    Greetings to all, I continue to show my work, I made a series of alterations with my mod, added loops and a mechanism for lifting the head of the Alien, as well as refined air intakes.