Leaderboard


Popular Content

Showing content with the highest reputation since 12/29/2013 in all areas

  1. 5 points
    Oy! This mod is something that I've been wanting to build for some time. It is a tribute to the cooler master ammo 533 case. The project is going to be an evolution from the Ammo series, both from an engineering and design standpoint. Personally I have been part of the Mekatronix Works (mktrx) case-mod team. We've previously participated in a number of regional events, in the last couple of years. Before that it was mostly custom watercooling and jerry-rigging our cases to fit the components. I am going to be using a similar HW monitor display system, in-build into the case as one of our previous projects "Tek'tonic III" (link below) The previous builds I have worked at were more of an abstract design and served no purpose in utility. With this competition I have the chance to build my system into something that will feed the nostalgia of my lanparty days. The materials I will be using: Aluminium, Plexi, Dibond and Carbon fiber reinforced ABS. previous builds: Tek'tonic Tek'tonic III Rog COOPER
  2. 5 points
    Thank you. There are still a lot of work to be done, many mistakes I make for the first time. I hope everything will work out. If you have any questions, please contact me. I will be glad to share my experience.
  3. 4 points
    This post was initially reserved for the final submission shots, that time has now come. I give you MKTRX Ammo 315, the ultimate lan-party rig:
  4. 3 points
    the workmanship that was late I posted. photos lost in the crowd. I did a basic painting. I forgot what date, but it was definitely done by the end of July the process of working 120mm fan grill that I forgot to document. and I only remembered to take a picture after it was done
  5. 3 points
    I made a hinge for the side panel cover. still from acrylic material
  6. 3 points
    I make fastening, from an aluminum corner, for Cooler Master Masterliquid 240.
  7. 3 points
    Hello friends! Decided to make changes in the design and add ventilation windows, for blowing out warm air.
  8. 3 points
    Testing servo sistem Progress after assembly of all parts listed above
  9. 3 points
    January 2015. That's all I can say for now.
  10. 2 points
    Keep it On Master!!!!!!!
  11. 2 points
    Hey CM dudes, y u not listen to what customers says? Seriously, I said this before: why in the name of something, do you make your keyboards with TWO Windows keys? Why would anyone need two Windows keys? This is an useless redundancy at the expense of a useful key which is the context menu key. Get rid of the right Windows key and bring back the context menu key! I'm looking to buy another mech. keyboard and guess what - even though I enjoy my Rapid-i, it won't be a another CM, I won't make this mistake again. Fix this or you've forever lost me as a client and I'm guessing that whoever uses keyboards for other things than gaming (don't you know, people that make games use keyboards too and they need the context menu key) uses that key just as often and therefore will look somewhere else. Pay a little attention to the "power user" crowd too. Looking forward to the new CM keyboard with a context menu key.
  12. 2 points
    I don't think getting a response is the issue, its the problem that some are being allowed to get the bracket, and others like myself are being flat out told that there is no bracket.
  13. 2 points
    But a couple of photos of how I did small tailpieces and a power connector.
  14. 2 points
    In the beginning I thought about the image of a Predator, but then I decided to create Alien
  15. 2 points
    Hi all, The Hyper 212 EVO will support socket AM4 There will be an upgrade kit for the Hyper 212 EVO in the near future. We unfortunately do not have an exact date yet when these kits will be available. Info will come a.s.a.p. Let me know when you have any other question.
  16. 2 points
    Hahaha...WTF. Mine started working on Thursday. I just spammed the buttons then it did some slow pulse and now I'm able to switch the lights on and off at will and switch between the modes. It's so funny that our mice started working round the same time, having the same problem and my internet has been off for a week now, changing ISP's. So very funny. Anyways, may our nights light up.
  17. 2 points
    stay tuned? we always hear this. You introduced the series in the summer of 2015! one year later you still don't release the bigger version. You Tell everyone it will be in CES 2017. Now what? wait till computex just for the announcement? then actually sell the case in the summer?? 2 frikkin years
  18. 2 points
    Here are some photos from build start, as promised Lets start with skeleton. Everything is made from steel, and stainless steel. Main frame is basically tripod, with stainless tube, and that frame will hold the case in "flying" position Here you can see the mount for PSU Base mount for HDD case, and HDD case Mount for coolers. Attached to main stainless steel pipe (backpack ) Breast plate skeleton. I will talk about this more in next post, when i upload more photos
  19. 2 points
    Elow 90% to finish my Build THANK YOU TO MY SPONSOR ASROCK BITSPOWER AVEXIR
  20. 2 points
    Custom Built By Envious Mods: EMI Designs has made the first test sample of the dog tags and badge that will go on the Dark Matter scratch build. They are laser cut out of black coated aluminum. The dog tag version will go with me to PC and case modding shows. I am very thankful to EMI Designs for sponsoring this build. Working with them is a pleasure and I really appreciate it. 240 Grill: Inside Fan Grill I have seen the first 240mm grill prototype done by EMI Designs and I am very excited for the final version to be done. I gave them the design concept and they did a great job. This will go on the two side mounted 120mm fans that help circulate air for the 1,200 watt BeQuiet Dark Power Pro 11 PSU. The door that these fans are mounted on open downwards so I wanted them to look slick when that panel was opened. Custom Sleeved Cable Routes: I have the main cable routes pre-planned but there is a couple that I left until everything is in position. The SATA power cables have been my main focus recently. I have quite a few different options for these cables. More than likely I will run them in a similar way as pictured below. The large Lexan water path will be on the back side of the motherboard tray and it uses standoffs. This leaves a large gap behind it and some of the cables will run through there. Trying an Idea: Left Side Panel Ive been milling around an idea I has for the side panels of this build and I recently decided it was time to give it a shot. Everyday I have a flood of ideas and certain ones keep coming back. If they start to take up too much of my thought process; its time to build it. This is one of those. This idea took a little while to figure out how to do it well and mount everything. I didn't want to permanently mount it, just incase I decided it didn't look right. My solution for this was to make a very thin backer piece out of acrylic and paint it to match the panel so it wouldn't be seen. This would also help to align all of the detailed pieces of acrylic. Now that its painted and mocked up you can see the idea come to life.
  21. 2 points
    Yes you Can! 1. Remove the botom antidust mesh 2. Turn the case upside down 3. Mound the Radiator Under the chassis with the hoses of the cooler towards the middle of the case. They have just enough clearance from the Rim. 4. Cut the antidust nesh to fit two openings for the hoses and drill 8 Holes to fit the Fan assembly holes (I used the Radiator as a basic frame of reference) 5. Mount the supplied Fans, encapsulating the antidust mesh between the Fans Chassis and Radiator (Install One and then turn the case on its feet again and then install the other) using Guards to blow air into the case. 6. I used the ATX B configuration for the MB with the rear Fan Blowing Air Into the case 7. With this configuration the Corsair LOGO is visible 8. Optional: you can cut a mesh the size of the radiator and fit underneath it to further prevent dust from entering the Case. Hope i helped You
  22. 2 points
    They used a custom lens which has x0.85 magnification (500dpi x 0.85 = 425cpi). If you want 500 dpi buy a broken G100S and pop in the lens from that.
  23. 2 points
    And I just got right about the USB UUID with a little modding I just fixed it. What I have done: -Download the latest driver and unpack it -open up "setup.ini" Why this file? the Setup checks for the device Class Guid. it won't install because it does not match.. So where can I find this? -right click speaker icon on desktop -select playback devices -double click your Speakers (Sirus Headset) -on General click on properties -once there you want to go to "Details" and select "Class Guid" This Class Guid is what is being used for the setup. Go ahead and right click it for copying and paste it without its { and } in your setup.ini and save Happy installing P.S: Can one tell me if the Guid {4d36e96c-e325-11ce-bfc1-08002be10318} is the same for them or not. If so, I can Zip a correct installation for people to download for windows 10 Now I feel like I should get paid by CM for doing their job.. (jk jk al in good fun) EDIT: I felt so free to just zip up the installation with the changed Class Guid and slammed it on my server for people to get around their issue. I don't know if this sorts out the issue for you, but once I got replies that it actually work for them I'm happy. http://teknocatron.com/software/cm%20storm/Sirus%20AP%20for%20Win10.zip
  24. 2 points
    Hi guys, made special an account special for this issue and to help to sort this problem out to Coolermaster, its an driver issue and nothing else, since windows 10 the most issues i had as an it hardware technician was graphics drivers and sounds issues, on bootcamp and apple bluetooth driver issues, mostly you can delete the hardware and use the microsoft drivers, but in the case gaming vga cards its not possible now i have no issue to have sound or special surround effects in games like battlefield, assetto corsa ,etc... but the moment i try to use skype, the headset goes crazy, sometimes sounds work, sometimes not than you have to switch in sound setting to onboard and play music at same time switch back to headset to get the sound back,also the microphone works in the settinsgs, but not when you call someone teamspeak same issue, micro dont work tried different setups, as windows 8.1 drivers + software, 8.1 without software, win 7 driver without software, you cant install it the regulary way, gave an error not support, and a fix around is not the same as the correct software and drivers ! ---> this is the part that Coolermaster has to step in !!!! i read further on this case win 10 + sirius + skype = a lot off problems with another driver onboard, the audio realtek one, as above i said the fix is the microsoft driver.... the only fix i found to let teamspeak and skype to work is the following = go to playback devices - select the sirius and go to properties, select stereo, do the wizard and tried it with skype, no issue at all but in our case WE bought a true 5.1 gaming headset to enjoy our games trufully in sound and effects and to better in games that use the sound, now i play with friend thoose games and cant talk or i had to put the playback device back in stereo and can't use the 5.1 i really hope this will be fixed with a new driver , cause at this moment i had to get back to windows 7 as the moment im typing this down, and will follow this tread closely in the hope they fix OUR expensive headset first timer i bought a coolermaster product but if this will not be fixed , cant say their will be a next time, support is everything today, and if you lack to this as an company .... well regards Fulgore
  25. 2 points
    Hello Sensen, The FX8320 is a hot CPU. If the idle temperatures do not come down after you reseat the cooler then I would suggest exchanging it for a Netpon 120XL or Nepton 240M. Respectfully, Patrick CMUSA Support
  26. 2 points
  27. 2 points
    The Concept is / was thet the Power of the Gaming PC brings life in the Dragon But a "simple" head alone is not enough, so... And on the spot, I made a test fitting More painting (iner mouth + some dental plaque) And here is an other part what cals this dragon to Live: A mini fog machine. ( Ok, a Real fire would be better, BUT on the DCMM it is not allowed to use open flames ) And gere is the testing of my concept, thet the smoke CAN be directed somewhere else (so I dont have to fit it in the head ) Te end of the Silicone (high temp resistante tube !) goes in the mouth of the dragon. And to make the Magic 12 LED-s (8 Red, 2 Orange, 2 Yellow) directed on the outcoming smoke + a little shimering for beter effect. This "beam of light" was too focused (in daylight it can be seen for 3-6 meters away on the wall) Later on I added four little LED strips to have a better efect (only RED is vonnected) At the end 24 LED-s are macking the "fire" VIDEO
  28. 2 points
    [/url]">http:// The parts begin to arrive
  29. 2 points
    Hey guys, I'm starting a new build, so I thought I'd post some pictures of it and some commentary Here are some specs: Cosmos II case MSI Z87 MPower Motherboard Intel i5 4670k 3x AMD 280x GPU Thermaltake Water 2.0 Performer CPU Cooler 2x 64 gb Toshiba OEM SSD Raid 0 EVGA SuperNOVA 1000G2 PSU I haven't figured out how much ram to get yet, so I'm just recycling some old ram in the meantime I'm also working on getting some harddrives The main point of this system was to do GPU computations, host a couple game servers and act as a file server, so I got a 4670k instead of a 4770k. I might upgrade later, but my budget is going towards more GPU power for now! I don't have access to a nice camera and lighting, so my pictures will be grainy (phone cameras are bad ). I've been busy today, so I haven't had time to work on the build much, but here are a couple pics to start off. As you can see, the box of the cosmos 2 is huge! I included a banana for scale Here's a quick look inside the box! Here's the cosmos compared to a small Lian Li case Inside the case. This thing is huge! Also, check out that bundle of cables Some impressions on this case: Wow, is it huge! I've typically only worked with mid-towers and mATX, so it's an even bigger jump up. The attention to detail on this case is staggering though. Everything seems to be thought out well and there are just so many features. I really like the sliding cover that goes over the power button and fan controller buttons: The sliding mechanism is very satisfying to move back and forth. It's fun just pushing it around to get the springy feeling! Similarly, the door that blocks the front bays has a sliding mechanism that feels really high class. It's held up magnetically, and once the magnets are disengaged, the door slides slowly downward. 13 harddrive bays is a ridiculous number, but being able to remove all of them by choice is what's great! All of the harddrive bays are removable with just a few screws, so depending on the type of cooling you have, you can use it for other things, like a radiator or pump or reservoir for water cooling. There were a few minor issues I had with my unit that's probably specific to my unit. For example, one of the bays on the hot-swappable front panel unit had a grindy sound when I opened it. Turns out, if I screw in one of the screws that hold the unit in the bay in all the way, the end of the screw gets in the way of the door mechanism. Not a big deal though, I just loosened it a bit. Even though I had expected the Cosmos II to be a heavy case, it was still way heavier than I expected. I even looked up the weight, but after picking up and holding the case, I got a realistic idea of how heavy it was. (almost 50 lbs!) I feel the weight is more or less required for a case this big and with this much stuff in it though, and with the handles at the top, it's really not that bad to pick up. If the case didn't have the handles, it would be impossible to carry anywhere More to come!
  30. 2 points
    Someone should be fixing those links soon! In the meantime, the global site has the links working http://www.coolermaster.com/powersupply/v-sm-series/v650s/
  31. 2 points
    Hi all, I think with the upcoming Nvidia GeForce 900 series, DDR 4 Memory kits and 5th gen Proccessors it's time Cooler Master to think of a new Gaming Power Supply unit. The GXII and GXII Pro series are above par PSUs for current gaming rigs, but when new hardware and technology arrives (which will be soon) these PSUs would be less efficient and at doing the job. and maybe power rating may also be too much to bear. Since new hardware're gonna be equipped with higher frequencies and smaller components they may need extra attention on power supply + they will consume less voltage and less power too. like GTX 780 which is replaced by 30% faster GTX 980, power requirment will go down from 200W to 170W DDR 4 RAM now only consume 1.2V instead of DDR 3 consuming 1.5V (1.65V max) etc. So thought of hearing what you think about on a new Gaming Power Supply unit, what do want it to be like, what specs do you expect and what faults Cooler Master should overcome from. Please Share your ideas Thank You.
  32. 2 points
  33. 2 points
    Finally done the live vid, Please let me know what you think on here or YouTube comments, good or bad because i need to learn so i can hopefully improve before any future builds sorry this is the only final info i can post for now, please check my Facebook page for photos i cant post links to on the forum, https://www.facebook.com/megadeblow?ref=hl Thanks Rob
  34. 1 point
    Hello dear friends. We are very glad to join CM2017. We will working on CoolerMaster Master Case 5, special thanks to CoolerMaster Iran, who gave us that amazing case! We've named this case modding CITADEL, as a symbol of armored and strong structures. wish we luck!
  35. 1 point
  36. 1 point
    We at Cooler Master would like to know more about your experience in purchasing Liquid Coolers and Air Coolers. Please take some time to fill out this anonymous online survey. http://coolermaster.force.com/survey/TakeSurvey?id=a0Z9000000QovunEAB&cId=none&caId=none
  37. 1 point
    You can open it, but it will void the warranty. Use a little drop of lube. Kind regards, Pim
  38. 1 point
    Hi Guys, here is my second entry for the Scratchbuild category of the Coolermaster World Series 2016 In this case the name is the game. ARMAGEDDON, The sum of all fears depicts what happen between what was and what is. Once again I would like to mention that its all 100 % handmade, no automative tools like cnc, 3d printers, laser or waterjets were used. the paintjob will be something not done before too. Its basically a computer table with hardware, but i wanted to radically change what others have made of this idea and make it more desk that can tranform into a PC. I did that by motirosing much of the hardware. One big difference is of course that I am taking leave from the very many time seen glass top tables which display the hardware. Dont get me wrong I love those builds, but they all follow the same principle, glass tope leds and water cooling and lighting etc,, all visible. My hardware will be inside and underneatch and mostle in the back of the table Another feature which was important for me is that it is a foldable tabel and can be transported even though when its stands its huge. ITS STILL UNDER CONSTRUCTION, but here is the progress so far, which will be finished by the end of the registration progress here, I hope. So far the monitor can be eleveated and lowered in, the camera can be slid left and right approx. 50cms, the keyboard can be revealed or concealed and the camera can now be tilted too and the 7xusb 3.0 hub can be revealed or concealed too. much much much more to come of course. this is the basic idea, with all sorts of hardware which can be revealed or concealed. stealthy and cutting edge.
  39. 1 point
  40. 1 point
    starting around the metal skeleton, seeing the proportions to make it all right. [/url] here it already is in its normal position, funny how this skinny now kkk [/url]
  41. 1 point
    Recieved mine yesterday. Scroll wheel click is already broken after 1-2 hours of use. Must be something to do with the 2 pin switches because it happened to my Avior SK as well (except after a longer time) and they both use an identical middle switch. Rebooting PC makes cursor movements janky. Feels like it cuts off every half second, leading to sharp edges in MS Paint. Polling is broken on 1.03 firmware, averaging ~960Hz on 1000Hz, although that's not a noticable problem. Left click is slightly squeaky but that can't be helped. Everything else seems to work great. No problems with software at all. Please, CM, I beg you, fix these in a firmware update. Or a Xornet III with slightly better build quality (squeaky switches) and slightly higher price tag. Or a Spawn II with 3310 or something. Please, just make any mouse with the Spawn/Xornet shape good!
  42. 1 point
    It has been 3 months since CM has received my power supply (9/27/2015) and approaching 4. Approximately around 11/20 (about two months later) I ask about it, I was told my previous PS was out of stock due to it being discontinued so I will get upgraded (from silent pro gold 1200w to v1200). I said okay, thank you (even though it took me asking two months later why the delay, I should have at least been notified of the problem when the issue was discovered). Five days later, I get a response saying they should have it shipped out within the next week or so. I'm like cool, okay thank you. I then wait again until the end of December before reopening the ticket and ask 'Where is the PS you told me would be shipped out a few weeks ago?', the reply was that the v1200 is now out of stock and will be shipped out to me when it is back in stock. Now I find myself to be a decently patient person, but... seriously?
  43. 1 point
    causing the arms [/url] [/url] [/url] [/url] ending arms
  44. 1 point
    I had a Quickfire TK before getting a Rapid-i, and i can confirm that it does not use PWM. I saw NO flickering at all.
  45. 1 point
    you can download at here : http://assets.coolermaster.com/gaming/download/cases/enforcer/enforcer-manual.pdf
  46. 1 point
    If you want quality CM is the way to go. My mate says the R4 is down on quality Also with that thick door the R4 is very poor in airflow.
  47. 1 point
    Hi tQ for your clarfication
  48. 1 point
    Awesome! lol I know the feeling, I had my build up and running before I tore it down for the last time, haha it took a lot of will power to break it all down for a few minor things, but it is totally worth it in the end! I cant wait to see this in some high quality photos!
  49. 1 point
  50. 1 point
    I do like handles to it's easy to carry those time when you need to move it around, I also prefer rear-bottom mounted PSU placement. As for the VGA holder, I've used some heavy cards before and really haven't felt that they are at much risk of breaking off. Granted if you have some aftermarket/non-reference cooler, it might be nice to have as a safety when moving it around, but then again, with special coolers the chances that a holder will fit properly are a bit less that normal (triple slot coolers and such)