Leaderboard


Popular Content

Showing content with the highest reputation since 09/19/2018 in all areas

  1. 4 points
    I even forgot to document the process of making a 70mm fan grill. The painting process has been done, even though I haven't yet smoothed every piece I have to repeat the process to make it look smoother. The fan intake that I used was taken from AMD cpu stock cooling fan some revisions must be made to the construction of the support, because there is a difference in the heavy fulcrum between the front and back of the casing. note: in the background there is a sliding window for the side panel that is too focused on it so I forgot to document it
  2. 3 points
    Work is almost done. Running test has been done. One of them is adjusting the lighting and color of the lights that will be used. Thanks God, everything went smoothly.
  3. 3 points
    a lot of work is not documented in detail. Maybe because I was too busy doing. I attach work whose details are not documented
  4. 3 points
    the workmanship that was late I posted. photos lost in the crowd. I did a basic painting. I forgot what date, but it was definitely done by the end of July the process of working 120mm fan grill that I forgot to document. and I only remembered to take a picture after it was done
  5. 3 points
    Why is not in Scratch!!! This is effing wild. Master class grade build right here FOR SURE!
  6. 3 points
    I made a hinge for the side panel cover. still from acrylic material
  7. 2 points
    body coloring with primer and top coat paint. Do not forget to include weathering and battle damage effects. the finishing process is still not done until now
  8. 2 points
    Keep it On Master!!!!!!!
  9. 2 points
    I recently bought the Masterset MS121 in order to use it to control my late 2016 MacBook Pro With the touch bar. However, I found that the keyboard did not work at all. It does not light up or show any form of life. I have plugged it into a windows PC an I have found that it works on that, then I plugged it into an iMac and it doesn't work there either. Is there any way that I can get it working on Mac or will I have to get a refund? Are any of the CM keyboards Mac compatible? Thanks in advance.
  10. 2 points
    I WORKED IT OUT!!! I have the CM ML120 with only one fan connected but this will work if you are using two. I should've done some research because the advertising on the box said Aura Sync, and I would assume it was illegal to advertise such things if it weren't available. I followed all the instructions that was given in the manual, plug cables into AIO header and CPU header, plug the other pump cable into the controller, plug the fans into the splitter which plugs into the controller, then i had to power the bloody thing too and figured out why it didn't work. then with a little research, the thought process was I had to plug SOMETHING into the RGB header on the motherboard... but the question was what! then after a little bit of playing around with different cables (including the 4 pin cable) plugging in and out of the controller it donned on me.... I needed a splitter that connected the pump and fans, and plug that directly into the RGB header on the motherboard. and then Bobs your uncle. Aura sync works instantly!!! So just to reiterate what I have done. Coolermaster supply a 3 way splitter, which you plug the female plugs from the pump and fan(s) into using the Male-Male adapters. Then simply plug the single female end into the 3pin RGB port on your motherboard.
  11. 1 point
    hi guys and here is another little update, i have clad a lot of the frame with worbla andmust get some more tomorrow.i can only start placing everything inside when i know which cage holes will be open and which closed so lets get this done first. its gonna be tight getting this all ready for the CMWS2019 deadline.
  12. 1 point
    A quick look at the first tubing mock-up. I thought I would do something less intricate with the loop this time but I just can't help it, I love parallel runs Made the bracket for the PSU mounting in the top section I reshaped the two back panels with this characteristic cut I'm bringing along this whole project, to make it smoother and more geometric Also began working on the front and top panels cutouts, I made this simple design in Silhouette Studio, cut the stencil and went over it with a pen once I applied it to the panel, this way all the sections in both panels will be exactly the same. It would've been hard doing it by hand since they're very irregular shapes. Obviously cut with my trusty scrollsaw And as anticipated in the previous post, I swapped the red LEDs of the lightbox with WRGB strips
  13. 1 point
    14: RADIATOR GRILLS - DESIGN I've been working with a couple of designs for my radiator grills and finished off with these two. One dedicated to tribute CMWS19, will be mounted to top radiator. The other one is my signature design that I modify and use for all sizes of radiators. This time a full cover including mounting and the parts sorrunding in/outlet ports. They will both be laser cut from 2 mm transparent acrylic and then get a very special treatment!
  14. 1 point
  15. 1 point
    Thanks Zeuligan!
  16. 1 point
    I have a hyper 212 evo that i purchased in 2017 and i recently bought a b450 motherboard and now i cant use this cooler because i dont have a bracket . i have looked everywhere online and no one sells the AM4 Kit anywhere. Where can i get the AM4 kit to mount the cooler ? i dont want to buy another cooler .
  17. 1 point
    This was the most challenging build I have ever done in my life. From surgeries to burns, working with glass tubing really put me in my place. There were countless times where I felt I was in over my head, however, I kept challenging myself to continue the project - and most importantly, to never give up; especially after I stabbed myself with a melted rod that broke inside my finger (which I had to leave in there for a week until I could see the surgeon). When I first started Torch, I thought I had the technique in the bag due to my comfort level with plastic tubing, but, little did I know I was in for a massive surprise. There is absolutely no margin of error when working with this type of tubing, and I cannot even count on my hands the amount of times I broke a pipe when installing the fittings. I will never forget the very clear crunch you would hear when the tube didn't line up perfectly, which ultimately meant the bend was no longer usable because the tip would chip off. Working with this material was an entirely new animal that didn't just require the bend at hand, but instead hours of practice on top of the build to understand the manipulation properties. From simple 90s to welds, working with glass brought me to a whole new horizon of possibilities in tubing, and in turn, bettered me as an artist. In the end, I came up with a machine that was both organic in nature, and a product of an art form that has always amazed me. I was incredibly proud of the results because, at the end of the day, the machine didn't defeat me, and I was able to achieve one of the most compelling builds I feel I have done to date. As far as my favorite feature of the machine outside of the glass work, I would argue that the epoxy resin back panel is almost as captivating. The pattern has such depth in person, that it almost looked like a blue patterned stone pulled right from the Earth. I certainly held my breath during the process because you don't really get a second chance when working with epoxy - and I am beyond thrilled I took the risk. Watch the resin pour here: Reservoir Delete Cooling System Intel i5 8600k @ 5.0GHz Samsung 500GB 970 EVO NVMe GTX 1070 Seahawk MSI Z390 Godlike Zadak Shield 16GB @ 4266MHz EKWB Supremacy Full Nickel EKWB VARDAR 120mm FANS EKWB 360 CE Radiator Thanks for viewing. I hope you enjoyed. Big thanks to EK for helping us on the cooling hardware too. Mod on
  18. 1 point
    SO, the cage main structure is done, while the glue was hardening, i mounted the gpu waterblaock and the bracket. not sure i will use the bracket yet though. once again, in addition to coolermaster, thanks also to asus and thermaltake for the great hardware...
  19. 1 point
    Thank you for your support!!! This is make me happy. I'm doing my best for success this project!
  20. 1 point
    thank you for the appreciation. to be honest, I don't have enough confidence to take part in the "scratch" especially in the master league. this is my first time participating in an international competition. Maybe in the next year, I will consider your suggestions
  21. 1 point
  22. 1 point
    06: FRONT COVER The front cover is a bit more tricky regarding its shape. This means I'll have to cut it and remove a section from the middle to keep the design. As I can't weld aluminium I had to go with a different method using chemical metal for the joint. With edges sanded down to a sharp angle I could get as much chemical metal as possible in the joint. This possible to be sanded down to a smooth surface. It will probably be strong enough on its own but attached to the plastic frame it will be solid. I put chemical metal on both sides to fill the gap. When dried out, this is easy to sand down to a smooth surface before painting. I haven't yet decided which color use for the aluminium covers but do like the CM black version of SL600M. Will probably have to try and see what it looks like But lets jump back to the frame and finish that one shall we!
  23. 1 point
  24. 1 point
  25. 1 point
    Mantapp.. lanjutkan master...
  26. 1 point
    printing more needed stuff... spacers psu mounting the whole lower hardware-slider mainboard plate fan holders (although i changed them to 2x 80mm with a slot for ssd) wheels and of course as you might have noticed, the frames got painted (lots of times, making the best of many mistakes...haha) also was able to put it all together for a nice preview.
  27. 1 point
    Bought this mouse recently and I love the feel of it, however I cannot install the software so that I can customize the mouse ad turn of the annoying lights or at least a less obnoxious setting. Please Help !!!!
  28. 1 point
    Eager to play Andromeda Mass Effect? Cooler Master will award 10 lucky winners with PC game codes and 2 peripherals on April 11th. Participate in the giveaway here
  29. 1 point
    I have an MSI b450 tomahawk and purchased a 3 fan kit of mf120r argb fans. Upon opening the fan kit, I noticed the connector from the kit for 4 fan headers (label says msi/asus/asrock connector) has a 2nd pin slot that is null (no opening), but my board has all 4 pins present on the board. This means it is unusable on the board. Is there another adapter or something in the kit I am missing?
  30. 1 point
    Are you using the correct sofware? There is the Cooler Master LED Controller software and there is the MasterPlus Beta Software. The LED Controller software has the mirage stuff on it and what you want to use. https://coolermaster.egnyte.com/dl/Z4xAkaxEXA
  31. 1 point
    Tell them u want all parts replaced. They sent it to me one by one so it took over a month :D.... It is not complicated but if u get ur faulty parts one by one like me u have to Always waste a lot of time in cable manament and stuff.
  32. 1 point
    Open a Ticket (took 2 days for me to get a answer). Had the same Problem u need a new top, front and a new pcb. Seems u got two old models. They changed a lot
  33. 1 point
    You can use the glass panel from C700P case: https://www.cmstore.eu/case/dual-curved-tempered-glass-side-panel-for-cosmos-c700p/. I've asked them in 2018 the same question and they said it would fit. If you need proof I can post a screenshot from my e-mail or you could contact them directly at: shop@coolermaster.eu .
  34. 1 point
    I still have the original paper manual so if you still need it I can scan it for you.
  35. 1 point
    Hello, not sure if you solved your issue or not, but I just went through similar issues with a new H500m and the MSI Gaming Pro Carbon Motherboard. I did eventually get the front fans to be connected in the Mystic Light software. The case should come with a 3-1 fan splitter already connected and that plugs into a normal fan header on the MB to run the fans. The two RGB cables from the fans get combined into the RGB controller. To get it to work with MSI Mystic Light, I connected the front panel reset switch to the controller, the micro-usb cable to a usb 2.0 header on the MB, the aRGB output cable to JRAINBOW on the MB, and the SATA power cable from my power supply. If that's all connected, open up Mystic Light and select JRAINBOW. Set it to Steady and pick a unique color that stands out. Now, use the reset button to cycle through the rgb controller pre-sets until you find the steady color you picked. Now you've selected the JRAINBOW channel and anything you set to it in ML will show on the front fans. Hope this helps ~Von
  36. 1 point
    Hello, same problem here I have 4 BROKEN xornet 2 mouses, all of thm have scroll wheel broken, unfortunaly i've bought mm 520 aswell, and it feels much cheaper and unnecessarily large (i've also removed the weight inside, cause it was too heavy), i've tried g102 but it's too long and not wide enough. Nothing i've found comes close to xornet, either they are much heavier or look like xornet but scaled in size which is not good for me. Funnily enough my hand is very large, but i only move my wrist, i'm really hoping they'll refresh it properly
  37. 1 point
    I was wondering if I could fix the terrible airflow without sacrificing too much of the looks of the MasterBox Lite 5, by replacing the front panel of the Lite 5 with the front panel of the MasterBox MB511. Would it fit without issues? Thanks!
  38. 1 point
    does anyone have the firmware they can upload all the links to cooler master dont work
  39. 1 point
    alot of idiots (like me) who are new to pc building bought this case forgetting to think about airflow. i just want to know if there are front panels that will fit my case with better airflow. thanks in advance
  40. 1 point
    Just wondering if anyone has a mesh front for this case. When i take off the front panel temps drop about 5-10 degrees. I have the three fans up front, a 240 mlrgb aio push pull on the top ( top and middle fans). If no one has a front mesh cover, would it be better to just take the aio off and go air cooled for the cpu? Would that give me better air flow? I prefer staying with the AIO if i can get a front mesh cover. Thank you.
  41. 1 point
    Title. I just want to know if it the tower's height is too short for both the cooler and the ram sticks.
  42. 1 point
    in my opinion the controller should work with the fans. just make sure you get the right controller. there is RGB and Addressable RGB (mini one). get the RGB controller for your fans.
  43. 1 point
    Hi Installed ML240l rgb on Asus ROG Zenith Extreme motherboard. The pump connector cable has 3 pins, Trying to determine where to connect it on the motherboard. All fan connections on motherboard are 4 pin. The only 3 pin is a water in and out, 3-Pin W_Flow. Thanks in advance for the help. Ron
  44. 1 point
    Just released with link from coolermaster to purchase on newegg!? $139 seems like a great price. typo maybe?
  45. 1 point
    I had a problem with a cooler master psu i open a rma ticket but they rejected it without reason. It was my 2nd psu cooler master who stop to work like this i advise you never buy a cooler master psu...
  46. 1 point
    you need to download the masterplus instead of the rgb software. ARGB BOX Firmware v1.0.0.1
  47. 1 point
    I purchased this today as it's listed on Asus own website that its Aura sync compatible. After slogging through the TERRIBLE manual (come on Coolermaster!), i found hours later despite numerous tries that no, it is not compatible with Aura. The Aura plugin is visible when you download the software from CM, but it's greyed out for me. EDIT: Figured it out and got it to sync with Asus Aura - the ML240 needs to have the CM software installed to enable Asus Aura (although the AURA & AURORA plugins are still unaccessible from the software.) I detached the controller and just used the 3in1 aRGB cable, plugged that into the aRGB of the Z370-F, opened both CM & Aura apps, and it synced.
  48. 1 point
    Hi there, You can request your extra mouse feet with our support department over at https://account.coolermaster.com/ Nice to see you are such a fan of the Xornet/Spawn and now MM520 -family
  49. 1 point
    Update: Using a surge protector took care of the issue. Thanks guys
  50. 1 point