Leaderboard


Popular Content

Showing content with the highest reputation since 08/18/2019 in all areas

  1. 7 points
    " DESERT RAT " This is the first time I am seriously participating in an international competition. Have also participated in competitions in several forums, but not done as seriously as this CMWS. The theme I use in the "Desert Rat" case is "Military Scifi". but you are free to translate it according to your own perspective. In each work that I make, I try a lot of ideas, and try to use many kinds of materials. For some circumstances, I am very interested in using acrylic or PVC sheet material in making PC modifications. One of my characteristics in PC modification is to manipulate 2D material into a 3D shape. Maybe there are still many shortcomings and require a lot of effort and criticism to improve my work. But it's ok, I accept it gracefully. Behind all this, I want to motivate many talented PC modders in my country. because, "There is never a competency that is not tested in a competition". Thank you in advance to many who have helped me in many ways. Thank you to CoolerMaster for giving me the opportunity in this prestigious competition Take the theme of the human struggle against heat in the desert. just as a PC fights heat from itself. The CoolerMaster product that I use: 1. MasterBox Lite 3.1 | MCW-L3B3-KANN-01 2. Tempered Glass for MasterBox Lite 3.1 | MCA-B300C-TGSP00-LGT 3. MasterFan MF120R ARGB | R4-120R-20PC-R1 x2 4. MasterLiquid ML120R ARGB | MLX-D12M-A20PC-R1 5. V650 | RS650-AFBAG1-EU 6. ARGB Splitter Cable | MFX-AWHN-3NNN1-R1 The hardware that I use in this project are: > MSI A320 PRO2-M2 > AMD Athlon 200GE > Transcend 4gb DDR4 > Samsung 256gb V-NAND NVME SSD > MSI GTX 1050 gaming X 2GB MasterBox Lite 3.1 | MCW-L3B3-KANN-01 Begin to release accessories on the casing I just took the frame as additional information, I don't use a 3D printer in this project. All the details that I made, using acrylic sheet materials with varying thicknesses, acrylic cylinders, and PETG tubing remaining pieces collect some details and match the size of the initial stages for the next worklog can be seen in the next column
  2. 4 points
    I even forgot to document the process of making a 70mm fan grill. The painting process has been done, even though I haven't yet smoothed every piece I have to repeat the process to make it look smoother. The fan intake that I used was taken from AMD cpu stock cooling fan some revisions must be made to the construction of the support, because there is a difference in the heavy fulcrum between the front and back of the casing. note: in the background there is a sliding window for the side panel that is too focused on it so I forgot to document it
  3. 3 points
    Top things to know before final submission opens on Sept 30 As the contest is almost coming to its final leg, final submissions will be the last thing we will need you to do and it will open on Sept 30 and kept open until the final deadline of Oct 10. If you have more than 1 entry this year, make sure you complete the process for each of your entries. 1. Complete your worklog Your worklog on the forum needs to be complete, showing the entire mod process from start to finish. This is really important as our judges will be looking at the entire process and give points according to each section. If something is unclear, it will be very hard to give you the full credit you deserve. 2. Take good quality photos or videos of your mod Take at least 5 - 10 good quality photos of your mod, keep a batch of clean photos without the watermark and publish online the set with the watermark. 3. Get Social You will need to share 1 main photo of your finished mod on social media without watermark, with the name of the mod, with a short description of the mod. Use the #CMWS19FINALS 4. Jury panel will be thorough This year the judges may ask you some questions about your mod in the forum, so be sure to check your messages during the judging phase so you answer all the jury's questions. 5. Public voting is still happening It is happening but there isn't a people's choice award this year. Your votes from the public will count towards 10% of your final score. 6. The judges this year will be revealed soon A lot of you guys helped with some suggestions, the judges this year we tried to be as neutral, and respectable as possible. Bringing in a range of judges from a various parts of the PC community. Who will they be...dundundun Got questions? Just message below, lets try to make this as easy as possible Ann Ann
  4. 3 points
    Work is almost done. Running test has been done. One of them is adjusting the lighting and color of the lights that will be used. Thanks God, everything went smoothly.
  5. 3 points
    a lot of work is not documented in detail. Maybe because I was too busy doing. I attach work whose details are not documented
  6. 3 points
    the workmanship that was late I posted. photos lost in the crowd. I did a basic painting. I forgot what date, but it was definitely done by the end of July the process of working 120mm fan grill that I forgot to document. and I only remembered to take a picture after it was done
  7. 3 points
    Why is not in Scratch!!! This is effing wild. Master class grade build right here FOR SURE!
  8. 3 points
    I made a hinge for the side panel cover. still from acrylic material
  9. 2 points
    body coloring with primer and top coat paint. Do not forget to include weathering and battle damage effects. the finishing process is still not done until now
  10. 2 points
    front panel minor touch, moving from old case & old cooler to new case & new cooler
  11. 2 points
    I just tried and tried my best in limitations ... Because there are no rules to change the max 20% from its original form in the apprentice league. But whatever the comments, I still really appreciate your attention to my work. note: I also greatly admire your neatness and speed in modifying. The combination of ideas and good quality hardware has made your PC modification a significant competitor for other participants. Good luck
  12. 2 points
    It's just to awesome.... jangan lupa kopi nya master... #Sungkem
  13. 2 points
    push the limit
  14. 2 points
    Keep it On Master!!!!!!!
  15. 1 point
    Looking good bro! Keep up the good work
  16. 1 point
    Mantap kang... nice detailing
  17. 1 point
  18. 1 point
    Также были вырезаны наклейки для второго кожуха
  19. 1 point
    dadaekanan copas ih. foto barutut kitu
  20. 1 point
    14: RADIATOR GRILLS - DESIGN I've been working with a couple of designs for my radiator grills and finished off with these two. One dedicated to tribute CMWS19, will be mounted to top radiator. The other one is my signature design that I modify and use for all sizes of radiators. This time a full cover including mounting and the parts sorrunding in/outlet ports. They will both be laser cut from 2 mm transparent acrylic and then get a very special treatment!
  21. 1 point
  22. 1 point
    Really sexy and awesome (as always) You rock (heja dig)
  23. 1 point
  24. 1 point
    Hi, I know it has been asked before, but nobody answered. I hardly believe that is impossible to find a replacement for HDD/SSD X Tray for the HAF XB. Can somebody from Cooler Master say say something please. They are still making and selling those cases . . . So . . . Thanks
  25. 1 point
    I have a hyper 212 evo that i purchased in 2017 and i recently bought a b450 motherboard and now i cant use this cooler because i dont have a bracket . i have looked everywhere online and no one sells the AM4 Kit anywhere. Where can i get the AM4 kit to mount the cooler ? i dont want to buy another cooler .
  26. 1 point
    This was the most challenging build I have ever done in my life. From surgeries to burns, working with glass tubing really put me in my place. There were countless times where I felt I was in over my head, however, I kept challenging myself to continue the project - and most importantly, to never give up; especially after I stabbed myself with a melted rod that broke inside my finger (which I had to leave in there for a week until I could see the surgeon). When I first started Torch, I thought I had the technique in the bag due to my comfort level with plastic tubing, but, little did I know I was in for a massive surprise. There is absolutely no margin of error when working with this type of tubing, and I cannot even count on my hands the amount of times I broke a pipe when installing the fittings. I will never forget the very clear crunch you would hear when the tube didn't line up perfectly, which ultimately meant the bend was no longer usable because the tip would chip off. Working with this material was an entirely new animal that didn't just require the bend at hand, but instead hours of practice on top of the build to understand the manipulation properties. From simple 90s to welds, working with glass brought me to a whole new horizon of possibilities in tubing, and in turn, bettered me as an artist. In the end, I came up with a machine that was both organic in nature, and a product of an art form that has always amazed me. I was incredibly proud of the results because, at the end of the day, the machine didn't defeat me, and I was able to achieve one of the most compelling builds I feel I have done to date. As far as my favorite feature of the machine outside of the glass work, I would argue that the epoxy resin back panel is almost as captivating. The pattern has such depth in person, that it almost looked like a blue patterned stone pulled right from the Earth. I certainly held my breath during the process because you don't really get a second chance when working with epoxy - and I am beyond thrilled I took the risk. Watch the resin pour here: Reservoir Delete Cooling System Intel i5 8600k @ 5.0GHz Samsung 500GB 970 EVO NVMe GTX 1070 Seahawk MSI Z390 Godlike Zadak Shield 16GB @ 4266MHz EKWB Supremacy Full Nickel EKWB VARDAR 120mm FANS EKWB 360 CE Radiator Thanks for viewing. I hope you enjoyed. Big thanks to EK for helping us on the cooling hardware too. Mod on
  27. 1 point
    SO, the cage main structure is done, while the glue was hardening, i mounted the gpu waterblaock and the bracket. not sure i will use the bracket yet though. once again, in addition to coolermaster, thanks also to asus and thermaltake for the great hardware...
  28. 1 point
    Thank you for your support!!! This is make me happy. I'm doing my best for success this project!
  29. 1 point
    Nice worklog and project, like where this is going...
  30. 1 point
    Cool concept, really like this so far. Will keep an eye on this for sure
  31. 1 point
    And the hole-ing process was begin, because my concern is the airflow.. the most negative things that being a discussion everywhere Pardon me, it's my first time use that things so if you all looking me holding those inappropriate way, sorry
  32. 1 point
    thank you for the appreciation. to be honest, I don't have enough confidence to take part in the "scratch" especially in the master league. this is my first time participating in an international competition. Maybe in the next year, I will consider your suggestions
  33. 1 point
  34. 1 point
    EDIT: I was able to get the lights working, and even control them from MasterPlus for a bit. But now every time I go to the H500M tab, Master Plus crashes. And it still won't let me update the firmware. So, I installed Aura. Before I had installed that, MasterPlus would just crash when I clicked on the "H500M" tab. Now that part works, and it lets me adjust the LEDs...but I still don't get any light out of the RGB LED fans. And when I try to update the firmware, it says the H500M isn't attached. Any thoughts?
  35. 1 point
    06: FRONT COVER The front cover is a bit more tricky regarding its shape. This means I'll have to cut it and remove a section from the middle to keep the design. As I can't weld aluminium I had to go with a different method using chemical metal for the joint. With edges sanded down to a sharp angle I could get as much chemical metal as possible in the joint. This possible to be sanded down to a smooth surface. It will probably be strong enough on its own but attached to the plastic frame it will be solid. I put chemical metal on both sides to fill the gap. When dried out, this is easy to sand down to a smooth surface before painting. I haven't yet decided which color use for the aluminium covers but do like the CM black version of SL600M. Will probably have to try and see what it looks like But lets jump back to the frame and finish that one shall we!
  36. 1 point
    Project Maple was designed to be the most Canadian thing imaginable; With its proud Red and white, assortment of maple leafs, and even golden maple syrup pumping thru its waterways. Its an honor to be entering into the 10th Anniversary, and I hope you enjoy Project Maple. Build List: Hardware: Mobo - Asus Maximus X Code - Painted CPU - i5 9600k @ 4.8ghz GPU - MSI 1080ti Aero OC Ram - TeamGroup T-Force Nighthawk 4x8gb 3200mhz SSD - TeamGroup T-Force 240gb PSU - Seasonic focus+ Gold 850w Case - Cooler Master MB530p with plenty of cosmetic mods. Watercooling: CPU - Swiftech Apogee SKF Prestige w/Iris ARGB GPU - Swiftech Komodo 1080ti w/CMWS19 painted backplate. Pump/Res - (Cut down to 170mm) Swiftech Maelstrom 200mm(170mm) d5 w/Iris ARGB Radiators - 3x Swiftech Hydrae GT(120/240/360) Painted Tornado red Compression Fittings - Nanoxia CF 16mm hardline painted Angled and extension Fittings - Swiftech Dual 45 rotary &15mm Drain - Dazmode Darkside Pushvalve Fluid - SwifTech "Mayhem" Dyes in distilled, and 1 drop of Dead Water Misc: Fans - Swiftech Helix 120mm w/Iris ARGB Controllers - Swiftech Iris ARGB Eco Controllers Cables - Tpbmods created, using Telios Sleeving from Mainframe Customs Cable Combs - Nanoxia CF with splatter paint job Paint - BombingScience.Com Ironlak/Moltow/FlameBlue MB530p Shroud rework - 10hrs Basic shrouds just dont cut it for me, So I set out to make something Ive never seen done before. The 3D logo "Flag" came to me after a first attempt at simply painting on the logo, and it was just bland. Flannel top was always something I wanted to incorporate. MB530p glass replacement - 7hrs I wanted to keep the case as cosmetically stock as possible on the exterior, with the full focus on the internals. Originally I had planned to do the entire front, but 4 hours in, my back was in such agony from being hunched over the saw, I cut a leaf in the bottom right and cleaned it up. Off to paint. The chop chop bits - 6hrs Chop it up, make it fit. Chop it more, paint it! Fitment was one thing I didnt take into consideration with the MB530P. I wanted perfomance, not just appearance! A day of Color - 12hrs So many parts to paint, such un-opportune times to paint. Anyone whos ever tried to paint when its 35c+ out will know, its brutal Your paint will dry before it has a chance to hit the mating surface, and too close will cause big time runs. Painting had to be done first thing in the morning while it was a cool 20c and left to bake outside all day long. And at last, the final stages. - 20hrs After taking a break for LTX19, I came back to work on making my cables, start on some tubes that I had to make while the case was still apart, get to riveting the case all back together, and assembly. I spent the better part of every free moment I had trying to get this looking good. I am not the best at bending tubes freehand(only an insert) But I think it worked out well
  37. 1 point
    aamiin insyaalloh
  38. 1 point
  39. 1 point
    weisss ada yutuber kahot. . nuhuun supportnyah yaaaaa
  40. 1 point
  41. 1 point
    Mantapp.. lanjutkan master...
  42. 1 point
  43. 1 point
    Hello, I did purchase the CM mm520 which is supposed to be an update of the CM storm mouse series. Unfortunately ,the shape is really disappointing/awfull if we compared with the previous version of spawn,xornet,xornet ii. I will ask to refund the mm520 Please CM,could you do a Xornet III with the same shape as previous version? Most people who bought previous CM storm mouse which the same thing,make a xornet III with unchange shape ,a comeback! Currently,i didnt find the xornet II with an affordable price. Is it discontinued?
  44. 1 point
    Thats weird. When my old controller broke they've sent me the old version again so probably it's got something to do with the new controller PCB layout.
  45. 1 point
    Hi, I just bought an MK850 and I was wondering if there was a way to assign a specific light to a reactive fade for each keys foreground and background. For example, if I want a keys N I A O S B R Z to have a different background and foreground color than the other keys. Would that be possible? If yes how do I do it? Thank you.
  46. 1 point
    I'm having the exact same issue. The ASUS/MSI/ASROCK 4 pin plug is a 3 pin plug.
  47. 1 point
  48. 1 point
    Hi Installed ML240l rgb on Asus ROG Zenith Extreme motherboard. The pump connector cable has 3 pins, Trying to determine where to connect it on the motherboard. All fan connections on motherboard are 4 pin. The only 3 pin is a water in and out, 3-Pin W_Flow. Thanks in advance for the help. Ron
  49. 1 point
    Hey everyone, Just wanted to write up a review of the MasterMouse MM520 after having used it for a day. I've previously owned the CM Spawn and Xornet II so as soon as the MM520 launched, it was a no brainer for me to order it right away. I heard how some folks that are diehard fans of the Spawn/Xornet might not be so sure about the changes for the MM520, so I wanted to just provide my thoughts on it (as a diehard Spawn/Xornet fan myself.) Shape/Size: (1st Place: Spawn/Xornet II | 2nd Place: MM520) Obviously, the biggest change is the shape and size of the MM520. I took a picture with my phone of the Spawn, Xornet II and MM520, side-by-side to give you guys a rough comparison -- take a look below and see for yourself. As you can see, it's a little bit longer in the left/right mouse button area than the Spawn/Xornet. It took a little bit of getting used to coming from years of using the Spawn/Xornet but what I noticed is that I can pretty much hold it the same way as the Spawn/Xornet as I used to and it feels more or less the same. However, now for those of you with bigger hands and/or longer fingers, you'll have more space to choose where you want to rest your fingertips. Also, with the increase in length I find that depending on how I hold the MM520, the back of it touches my palm which I'm still getting used to. (I think it's also because the groove on the left-side of the mouse for the thumb is a little deeper). With the Spawn/Xornet, I primarily used Claw + Fingertip grip, so the back of the mouse hardly ever touched my palm (that was just my preference; it helped me to do insane flick shots ). The last thing related to the length is that the positioning of the scroll wheel is a little bit further than I'm used to. Previously, with the Spawn/Xornet, my finger would touch the top-half of the scroll wheel to turn it; now it touches the bottom-half. Overall, this is not too hard to get used to. I'd say the second point above about the MM520 touching my palm is the most noticeable change. Weight: (1st Place: Xornet II | 2nd Place: Spawn | 3rd Place: MM520*) According to the specs of all three mice, the weights are: (without the USB cable) http://www.coolermaster.com/peripheral/mice/spawn/ (90g) http://www.coolermaster.com/peripheral/mice/xornet-ii/ (80g) http://www.coolermaster.com/peripheral/mice/mastermouse-mm520/ (101g) I definitely noticed the increase in weight. It didn't affect my aim as much, but it was noticeable. For insanely fast flick shots, a lighter mouse will always be better (it's physics!) * Fortunately, I found a YouTube video that shows how we can remove the internal 12g weight. I think after I remove that, the weight will be perfect. Sensor: (1st Place: MM520 | 2nd Place: Xornet II | 3rd Place: Spawn) Awesome choice on the sensor CoolerMaster. It's just perfect. Don't think things can get any better than this. Texture and Feel: (1st Place: Spawn | 2nd Place Tie: Xornet II and MM520) To be honest, I kinda miss the all-rubberized feel of the Spawn. That was perfect in my opinion. However, with the MM520, I can see the benefits of the new material -- it's no-slip plastic and doesn't seem to attract sweat/oil. I guess I'll find out over time. To those of you who love the rubberized grip feel, rejoice in the fact that the MM520 at least has that on the right side of the mouse for your pinky. I feel like the left-side of the mouse would've benefited from having the same rubberized texture as well (like the Xornet II). Buttons/Scroll Wheel: (1st Place: MM520 | 2nd Place: Xornet II | 3rd Place: Spawn) The MM520 has larger left/right mouse buttons and side buttons. Same tactile feel as the Xornet II. The scroll wheel is better than the Spawn/Xornet II (better grip, smoother scrolling, slightly bigger.) The only minus is there's only one DPI button now (used for TactiX which can act like a SHIFT key for all the buttons). It would've been nice to have two DPI buttons like on the Spawn/Xornet II. Software: Better than the Xornet II/Spawn software for sure. However, the LED editing UI needs a bit of work. It's a little confusing when editing each LED zone. It'd be nice to have some tooltips/help guide to figure out what each setting means. It's also not clear if I can set the LED lights for each DPI setting/profile. I've somehow managed to configure it so that as I cycle between DPIs, the scroll wheel changes color to indicate the DPI setting, and after a few seconds, it goes to the LED settings in the software. I can't figure out how to change the different DPI indicator colors though; seems to be hard-coded as Red, Light Purple, Blue then Green. The only other gripe I have about the MM520 software is that it takes a few seconds to save the profile after I click Apply. But fortunately, I only have to setup my mouse once. TL;DR -- Should you get this or not? Yes! If you previously loved the Spawn/Xornet line of mice and have medium/large hands or long fingers, you'll have an easy time switching to the MM520. However, if you have small hands and felt that the Spawn/Xornet was the perfect size already, then the MM520 might not be for you. If you made it this far, thanks for reading the review and hope it helps! Suggestions to CoolerMaster: For newer versions of the MM520, here's some stuff I'd like to see in the future: 1) Shape/Size: Overall, I think a mouse that has a shape/size somewhere between the Spawn/Xornet II and the current MM520 would be perfect (at least for me ). However, I think if CoolerMaster did what Zowie did for their ZA line of mice by offering different sizes (e.g., ZA11 - Large Size, ZA12 - Medium Size, ZA13 - Small Size), they can appeal to essentially every Claw/Fingertip gamer. Please make it happen CoolerMaster -- you guys are on track to having the perfect claw/fingertip mouse! 2) Weight: I think that by offering different sizes with the same shape like mentioned above could potentially solve this. For newer versions of the MM520, maybe an easier way of adding/removing the weights would help. For now, I think just including replacement feet would be enough for us diehard fans 3) Texture: Bring back a rubberized version like the old Spawn! I'll pay extra for it. 4) Software: I'd really like to be able to customize the LEDs (all the zones) for each DPI setting and profile! Kinda like what was there for the Xornet II. I'm not sure if I'm doing something wrong with the software right now (like if that functionality exists and I'm just dumb) or it's not supported. Either way, the UI could use some work.
  50. 1 point
    Hi there, You can request your extra mouse feet with our support department over at https://account.coolermaster.com/ Nice to see you are such a fan of the Xornet/Spawn and now MM520 -family