All Activity

This stream auto-updates     

  1. Today
  2. you can use 2x 360 rads (front and top) with the 2x 5.25 bays in place.. you only need to remove the 5.25" bays for clearance with 420 rads (either position will require removal of the 5.25" bay mount.. Also you must move or order a third bracket to use the bottom radiator mount (it is the same frame as is used in top/front but case only comes with 2 frames)
  3. Yesterday
  4. I've already been able to solve the problem, the connector of the controller was a little removed from the factory and neither noticed and did not contact, I put it inside and it works properly, everything works perfectly, I can say it is a fantastic tower, Silent, very spacious and very easy to assemble. The only downside is the cable of one of the fans precisely the front bottom fan does not reach the motherboard, I have to put an extension cord. A greeting.
  5. Hi, I have the CM600P and I have a problem and I do not know how to solve it, it turns out that pressing the button to change the light mode does not work, the lights just blink, only one wire sata comes to connect it to the power supply, I do not know if I do something wrong.
  6. I need to replace NotePal U2 Plus fan. not listed in spares
  7. I unfortunately from Italy I can not call assistance, I have also noticed another problem related to the fans when I press the button to check everything on the motherboard always run at maximum ... you too is so?
  8. i have received a new controller, new front panel and new top panel, same problem....
  9. I have a problem with the masterkeys pro l rgb keyboard after the keyboard management program has automatically updated the keyboard firmware. Everything worked before. I can't keep the profiles p1 p2 p3 p4 active without opening the cm portal program. That is, the keyboard at the start of windows works for the first 5 seconds; if I scroll between the various saved profiles they work but then they become all the red keys. If I press p1 p2 p3 p4, it doesn't change them but it just turns them off. If instead I use cm portal and I press start, the 4 profiles are selectable from the keyboard and there are no problems until the moment I turn off the PC. In fact, in the new start of windows the situation described above will recur again. I tried: - press fn + esc - press fn + e / r - uninstall the keyboard - uninstall cm portal NOTHING. The problem at every PC restart occurs again. How can I solve it? ( is as if the keyboard / pc needed the cm portal program to work) Translated with google translator
  10. hello I opened a ticket, they replied telling me they will send me a new controller .. has anyone solved it? if so how? Sorry for my english
  11. Hello all, I could use some advice. I'm in the process of completely upgrading my rig and am new to liquid cooling, as I've always been so paranoid about leaks, but I am very seriously considering the MasterLiquid ML240L RGB for my CPU cooler. I have a HAF X case, which has served me very well over the years, but I'm unsure about where I'd be able to mount the radiator. It's already got a ton of cooling capability with it's front 230x30 mm red LED fan, top 200x30mm fan, side 200x30mm fan, and rear 140x25mm fan. It looks like it's got some kind of mounting points at the top of the case, but after doing some research I feel a front mount would be better. Is there any way of doing that with the HAF X or am I going to just have to deal with the top mounting? Here is the components I'll be using: CPU Intel - Core i9-9900K 3.6 GHz 8-Core Processor $479.99 FREE $479.99 Walmart Buy CPU Cooler Cooler Master - MasterLiquid ML240L RGB 66.7 CFM Liquid CPU Cooler $69.99 FREE $69.99 Newegg (Overridden) Buy Motherboard MSI - MPG Z390 GAMING EDGE AC ATX LGA1151 Motherboard $181.99 $3.99 $185.98 SuperBiiz Buy Memory G.Skill - Trident Z 16 GB (2 x 8 GB) DDR4-4400 Memory $254.99 $0.99 $255.98 Newegg Buy Storage Samsung - 860 Evo 1 TB 2.5" Solid State Drive $147.99 $147.99 Amazon Buy Seagate - IronWolf NAS 6 TB 3.5" 7200RPM Internal Hard Drive $179.89 FREE $179.89 OutletPC Buy Video Card EVGA - GeForce RTX 2070 8 GB Black Video Card
  12. We are all the same, do not let this fall. What is needed for Cooler Master to pay attention to us? to be a famous youtuber? We have purchased one of the most expensive power supplies on the market and it turns out that it is super noisy and its software is reset at every restart. Well, I'm not satisfied. Cooler Master fix it or refund us the money !!
  13. What if you put the software to keep the options when you press the "save" button? I choose the profile "Silent" and at each reboot of the system it returns to the profile "Default" ignoring my configuration.
  14. The months pass and we continue the same. Every time I turn on my computer it sounds like it was a cheap computer manufactured 15 years ago. This is a real shame. How can you ignore your clients in this way?
  15. Last week
  16. WIN 7 Ultimate. . P8P67 motherboardFollowed install instr. Replaced original CPU fan. On boot-up the BIOS did not recognize that a CPU fan was present and prevented boot-up. Changed BIOS to ignore CPU fan, boot-up successful. Now that the BIOS configuration has changed, Computer will not go into Sleep mode and stays on. Can force Sleep mode. There are 2 4 pin connect points at the motherboard and I plugged the fan into the original fan connection. Other than the BIOS issue, all works fine Do you know how to correct this?
  17. WIN 7 Ultimate. Followed install instr. Replaced original CPU fan. On boot-up the BIOS did not recognize that a CPU fan was present and prevented boot-up. Changed BIOS to ignore CPU fan, boot-up successful. Now that the BIOS configuration has changed, Computer will not go into Sleep mode and stays on. Can force Sleep mode. Did you get an issue like this? Do you know how to correct this? Following the wiring connection instructions. Everything worked as it should after I reset my BIOS.
  18. There are 2 leads. One for the CPU fan and one for the RGB connection. WIN 7 Ultimate. Followed install instr. Replaced original CPU fan. On boot-up the BIOS did not recognize that a CPU fan was present and prevented boot-up. Changed BIOS to ignore CPU fan, boot-up successful. Now that the BIOS configuration has changed, Computer will not go into Sleep mode and stays on. Can force Sleep mode. Did you have an issue like this? If so, how did you correct it? Customer support is NIL, 0/10 for them
  19. Cooler Master bills the MasterAir MA620P as compatible with Asus Aura Sync. Can anybody help me figure out how to actually make them work together? I have an Asus B450-F Strix motherboard with a pair of 4-pin RGB headers. The logical (indeed the only) way that I can see to connect the cooler to the board is to hook the included 4-pin Y splitter from the fans to one of those RGB headers, but when I do that the fan lights don't come on at all. The Aura app lets you change the colors for each RGB header individually so I tried cycling through various options for the header the cooler is connected to, but none of them yielded any result. I know the lights on the cooler fans DO work and I didn't just receive a pair of defective fans, because if I connect them to the controller Cooler Master includes (which itself connects to a MOLEX) then the fan lights come on immediately and I can cycle through the colors/patterns using that in-line controller. What am I doing wrong here?
  20. Hi Gennaro, you're not alone.. see others topics. you can open a ticket here : https://account.coolermaster.com/LogOn.aspx Good luck....
  21. Did you plug it directly into the mobo or use the CM controller?
  22. Your pics doesnt tell much. What mobo brand and model? How did you connect the rgb? Controller? Directly to the mobo with a rgb splitter?
  23. You cant link CM products to Aura by running the CM software. Not going to happen. For Aura to control it there has to be a "physical" connection to a mobo header. Sorry, didnt read your post properly the first time.
  24. Hi Does anyone know where to buy CM case MS600? Its been releases 9 months ago, but not on amazon, not on ebay..how to buy?
  25. Hi, I have two SATA ports on my fan / LED controller, both need two to be connected or one is it enough? Thank Hi,
  26. On the manual, it is advertised that I am able to change or adjust lighting zones through the fn + f6 combo. But when I try it, it only changes the direction which was another use of the combo.
  1. Load more activity